4720-14-463-0433
Nonmetallic Hose Assembly
4720144630433 144630433 70900301 39537049
A length of nonmetallic hose with fittings on one or both ends. For items without fittings, see HOSE, NONMETALLIC. Excludes HOSE ASSEMBLY, AIR DUCT; and HOSE ASSEMBLY, AIR DUCT, AIR BREATHING. View more Nonmetallic Hose Assembly
Managed by France
NSN Created on 12 May 1993
Data Last Changed
January 2023
January 2023
NATO Update Count
1
1
NATO Data Quality
Marketplace 4720-14-463-0433
Need Help?
Request a Quotation from participating marketplace vendors
Request a Quotation from participating marketplace vendors
Related Documents 4720-14-463-0433 5+ Documents (More...)
2000 2530-14-511-7185 https//www.nsnlookup.com /cage Nicolas Industrie (CAGE Code F3255) 1993 4720-14-463-0433
DAC: 4 16 Nov 2011 5340-14-463-0436 Turnbuckle 70401046RNCC: 3 | RNVC: 2 | DAC: 2 12 May 1993 4720-14-463-0433
5310-17-103-6515 5310171036515 171036515 is a washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.
5310-15-114-3361 5310151143361 151143361 is a washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.
5325-14-320-2777 5325143202777 143202777 is a resilient metal item, circular or nearly circular, which is designed to be inserted into an internal or external groove and retained by its own spring action, or it may have external prongs or projections designed to be inserted into a hole and retained by spring action of the prongs which grip by imbedding into the material. for items having internal prongs which perform the same function, see push on nut. it is used to keep and/or lock a part(s) in position, as a ball bearing on a shaft or in a housing. see also clip, retaining and pin, lock. excludes ring, connecting, round.
Restrictions 4720-14-463-0433
End Users 4720-14-463-0433
- France (ZF)
Approved Sources 4720-14-463-0433
- Part Number
- Manufacturer
- Status
- 70900301
- Manufacturer
- F3255 - Nicolas Industrie (Active)
- Primary Buy
- Primary Buy
- 39537049
- F2839 - Thales Service Industries (Replaced)
- Secondary Buy
- Secondary Buy
NATO Stock Numbers Related to 4720-14-463-0433
4930-98-855-1116 4720-99-845-9126 4720-14-311-2847 4720-14-269-0904 4720-21-913-4339 4720-14-277-3699 4720-15-118-9773 4720-14-308-8664 4720-17-114-6295 4720-99-477-5829 4720-12-341-5895 4720-12-330-2083 4720-99-477-5984 4720-17-124-9106 4720-27-053-5411 4720-99-374-7025 4720-12-353-8651 4720-99-580-4201