4720-21-874-8724

Documents 4720-01-476-1437 1+ Documents ( More... ) https//www.nsnlookup.com /fsg-47/fsc-4720/ca 4720-21-874-8724
Nonmetallic Hose 4720218748724 218748724,7210 Account Upgrade 4720-21-874-8724Nonmetallic Hose4720218748724
218748724 7210 2663-4-10 H104-1-4-1000 FC211-04 Buy RNCC 3 RNVC 2 DAC 5 H104-1-4-1000 79470 - Dana Corp

plate, identification. excludes tag, instruction. https//www.nsnlookup.com /fsg-47/fsc-4720/ca 4720-21-874-8724
Nonmetallic Hose 4720218748724 218748724,7210 4720-21-874-8724 4720218748724 218748724 is a flexible

Bolt4730006760860 006760860 ER01713 https//www.nsnlookup.com /cage Dana Corp (CAGE Code 79470) Jun 1968 4720-21-874-8724

5306-01-171-8075 5306011718075 011718075 is an externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. the head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. see also screw, cap, hexagon head and screw, machine.

5306-01-188-6842 5306011886842 011886842 is an externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. the nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. the head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. for items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. for items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.