4710-01-566-7181

15145970003991514003991514 https//www.nsnlookup.com /fsg- https//www.nsnlookup.com /fsg-47/fsc-4710/us 4710-01-566-7181
Metallic Tube 4710015667181 015667181,3991514 nonmetallic channel; nonmetallic special shaped section
us 5970-00-399-1514 59700039915140039915145970-00-399-15145970003991514003991514 Restrictions 4710-01-566-7181

5365-01-392-6742 5365013926742 013926742 is a thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. it is designed to maintain a predetermined distance between two surfaces. for round items without a hole and having a solid rectangular cross-section use disk, solid, plain. items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. for items with thickness greater than those indicated above, see spacer, plate; washer, flat and spacer, ring. when thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. see also shim stock, laminated; shim stock assortment, gasket; and bearing, washer, thrust.

2590-14-392-6742 2590143926742 143926742 is a definite continuous length of cable, special purpose, electrical, having one or more ends processed or terminated in fittings which provide for connection to other items. excludes items having branches or forks. excludes lead, test and cable and conduit assembly, electrical.

5950-00-392-6742 5950003926742 003926742

5330-14-399-1514 5330143991514 143991514 is an elastic material of compact (solid) or cellular structure having smooth, crepe or porous surface(s) and having an oval, parallelogram, square, rectangular or d-shaped cross section. it is produced in various thicknesses. strips are limited to widths of 6 inches (152.4mm) or less. it may or may not have a nonrubber backing or a wire cloth or cord insert. for items having a round cross section, see rubber round section. excludes rubber sheet, inner tube repair. see also nonmetallic angle; nonmetallic channel; nonmetallic special shaped section.