4710-00-603-8541

5905-12-138-4672 5905121384672 121384672 is a resistor whose ohmic value cannot be adjusted or varied. the resistance element consists of either a thin layer of conductive material, containing either binders or insulating materials, deposited on an insulated form; or an alloy of metal and ceramic materials, usually fused to an insulated form. opposition to the flow of current is an inherent property of the materials used and is manifest by the heat dissipation in the resistor. see also attenuator, fixed and resistor, fixed, composition. excludes carbon composition type resistors.

7045-25-138-4672 7045251384672 251384672 is an electromechanical or solid state item which accepts and systematically accepts and systematically retains digital input data in such a manner as to facilitate the rapid recovery of stored information. the item may or may not consist of disk(s) some of which are removable, hard, removable disk packs, fixed disks, or removable flexible, each surface coated with a material suceptible to spot magnetization, integral writing, a drive motor and its mechanical linkage, and data translating heads for impressing on or removing from the disk surface data in digital form. the item is a component of an electronic computer. see also, magnetic drum, data storage; core memory unit.

6220-15-138-4672 6220151384672 151384672 CUFFIA

5962-01-138-4672 5962011384672 011384672 is a microcircuit specifically designed to generate, modify, or process electrical signals which operate with two distinct or binary states. these states are commonly referred to as on and off, true and false, high and low, or "1" and "0".

5306-99-138-4672 5306991384672 991384672 is an externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. the head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. see also screw, cap, hexagon head and screw, machine.