4710-00-061-0929

4730-00-193-3207 4730001933207 001933207 is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. both connecting ends have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. it may have side or heel inlet(s). see also elbow, pipe and connector, multiple, fluid pressure line.

6140-12-193-3207 6140121933207 121933207 is a definite continuous length of electrical conductor of stranded, braided, or laminated construction. both ends must be terminated and at least one end must have a lug terminal specifically designed for connection to a storage battery. it may be insulated or uninsulated and may also include an outer protecting sleeve or conduit. for leads of this nature with other types of terminals see lead, electrical. excludes lead, ignition, engine; and lead, engine.

5305-99-193-3207 5305991933207 991933207

7610-22-193-3207 7610221933207 221933207

5310-15-193-3207 5310151933207 151933207 is a washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.