4710-15-065-8493

6350-01-310-0206 6350013100206 013100206 is a device designed to convert energy into audible signals by means of a diaphragm or specially designed horn element. sound may be produced by liquid, electro-mechanical device or pressure means.

1005-99-310-0206 1005993100206 993100206 EJECTOR,RETAINING R

4710-00-310-0206 4710003100206 003100206 is a bent hollow item, welded or seamless. it has a round, square or any other cross section, with a continuous periphery. it is primarily designed to convey fluids, gases and/or semisolids. excludes items of circular cross section which conform in dimensional characteristics to pipe, metallic; elbow, pipe; elbow, tube; bend, electrical conduit; bend, pipe, return; and bend, tube, return. for items with end fittings on one or both ends, see tube assembly, metal.

6105-14-310-0206 6105143100206 143100206 is a motor which is designed to be operated from two independent voltage sources, in such a way that variations in one voltage source will determine the direction and speed of the motor. in the alternating current type the voltages are usually applied to a split-phase stator, whereas in the direct current type, one voltage is applied to the stator and the other to the armature. low inertia and rapid reversibility are inherent characteristics of this type of motor. see also servomotor, automatic pilot.

5325-00-282-7140 5325002827140 002827140 is a resilient metal item, circular or nearly circular, which is designed to be inserted into an internal or external groove and retained by its own spring action, or it may have external prongs or projections designed to be inserted into a hole and retained by spring action of the prongs which grip by imbedding into the material. for items having internal prongs which perform the same function, see push on nut. it is used to keep and/or lock a part(s) in position, as a ball bearing on a shaft or in a housing. see also clip, retaining and pin, lock. excludes ring, connecting, round.