4710-14-536-3440

DAC: 2 29 Jul 2003 4730-14-521-1683 Pipe Flange 0014853RNCC: 3 | RNVC: 2 | DAC: 4 12 Jul 2000 4710-14-536-3440

8405-27-001-5002 8405270015002 270015002 is an official or distinctive cap worn by members of a particular group, especially when on duty.

1680-19-001-5002 1680190015002 190015002 FITTING-SLINGING SU

5340-33-001-5002 5340330015002 330015002 is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. this item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. the item may have a center hole and/or bolt holes. excludes cup, hydraulic brake cylinder.

5310-43-001-5002 5310430015002 430015002 is a washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.