4710-14-469-6290

9 Apr 1992 2590-14-424-1227 Plastic Molding 16-36495NORNCC: 3 | RNVC: 2 | DAC: 3 17 May 1988 4710-14-469-6290

5975-27-013-9655 5975270139655 270139655 is a box, frame, or plate fabricated of electrically conductive material designed to mount, but which does not include, electronic components and their associated circuitry. it may have facilities for attachment to a rack or cabinet or to accommodate specially designed components. it may include a shielding function, integral wiring, and mounting hardware as part of the item. excludes mounting base, electrical equipment.

5365-27-013-9629 5365270139629 270139629 is a metallic or nonmetallic item of various peripheral shapes and a solid cross-section. it is designed to maintain a predetermined distance between two surfaces. it may have flat parallel bearing surfaces. do not use if a more specific name applies. see also spacer, ring; spacer, plate; spacer, sleeve; spacer, stepped; shim and washer, flat.

5950-00-808-6015 5950008086015 008086015 is a coil or coils usually constructed with cores having low magnetic reluctance, whose primary purpose is to furnish an inductive impedance in power or audio frequency circuit ranging from zero to 20 kilohertz (kilocycles). includes audio frequency and power filter chokes, audio reactors and swinging chokes. does not include transformers or coils used above audio frequency range. excludes saturable reactor. for reactors with air cores, see coil (as modified).

5999-27-013-9634 5999270139634 270139634 is an item fabricated from electrically nonconductive material specifically designed to provide a support for mounting an electrical and/or an electronic component such as a semiconductor device, relay, or resistor into the next higher assembly. it isolates the component from the mounting surface of the next higher assembly, it may act as a strain relief to avoid damage to the component seal, and it may permit soldering of the component to the next higher assembly without damage. it includes holes, notches, or other provisions for physical alignment and spacing of electrical leads and/or other mounting facilities projecting from the component it mounts. it may also afford protection from shock or vibration. it may be either nonthermally conductive which protects the component from temperature changes in the next higher assembly or it may be thermally conductive which permits heat generated in the component to be drained out to a heat sink. for items whose function is electrical insulation only, see insulator, (as modified). excludes holder, (as modified); retainer, (as modified), and spacer, plate.