4710-14-371-2799
Metallic Tube
4710143712799 143712799 1543638
A straight, hollow product, welded or seamless, of round, square, or any other cross section and continuous periphery, which does not conform in cross sectional dimensions to recognized pipe standards, or those in Tables 1 through 10, Appendix C, FIIG A004A. It is designed to convey fluids, gasses, and/or semisolids. It may be rolled into coils for ease in handling. For items designed to join a tube or tube fitting to another tube, pipe, or hose or fitting, see ADAPTER (as modified); COUPLING (as modified); or NIPPLE (as modified). Excludes TUBE, BENT (as modified); PIPE, METALLIC; SPACER, SLEEVE; METAL BAR (hollow); and items with fittings, except end protectors. View more Metallic Tube
Managed by France
NSN Created on 5 Aug 1981
Data Last Changed
July 2023
July 2023
NATO Update Count
1
1
NATO Data Quality
Marketplace 4710-14-371-2799
Need Help?
Request a Quotation from participating marketplace vendors
Request a Quotation from participating marketplace vendors
Related Documents 4710-14-371-2799 5+ Documents (More...)
Documents 8105-01-154-3638 1+ Documents ( More... ) https//www.nsnlookup.com /fsg-47/fsc-4710/fr 4710-14-371-2799
Metallic Tube 4710143712799 143712799 valve, graphite impregnated and lubricated items. https//
Metallic Tube 4710143712799 143712799 valve, graphite impregnated and lubricated items. https//
5310-33-154-3638 5310331543638 331543638 is a washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.
1 Jan 1972 5365-14-306-2919 Machine Thread Plug 356624RNCC: 5 | RNVC: 9 | DAC: 1 1 Jan 1974 4710-14-371-2799
5330-00-154-3638 5330001543638 001543638
5905-12-154-3638 5905121543638 121543638 is a resistor whose ohmic value cannot be adjusted or varied. the resistance element consists of either a thin layer of conductive material, containing either binders or insulating materials, deposited on an insulated form; or an alloy of metal and ceramic materials, usually fused to an insulated form. opposition to the flow of current is an inherent property of the materials used and is manifest by the heat dissipation in the resistor. see also attenuator, fixed and resistor, fixed, composition. excludes carbon composition type resistors.
Restrictions 4710-14-371-2799
End Users 4710-14-371-2799
- France (ZF)
Approved Sources 4710-14-371-2799
- Part Number
- Manufacturer
- Status
- 1543638
- Manufacturer
- 12603 - Clark Equipment Co (Replaced)
- Secondary Buy
- Secondary Buy
- 1543638
- F0851 - Genemat (Ste Gle De Materiels (Cancelled)
- Canceled/Obsolete
- Canceled/Obsolete
NATO Stock Numbers Related to 4710-14-371-2799
4710-25-140-8024 4710-99-327-4282 4710-99-011-2623 4710-17-109-4933 4710-12-368-7108 4710-12-371-6689 4710-21-852-1321 4710-17-105-5922 4710-99-601-2449 4710-99-611-0175 4710-21-846-5843 4710-98-201-8783 4710-34-030-9629 4710-99-424-0812 4710-21-909-3414 4710-99-465-8856 4710-98-106-7718 4710-99-641-5539