4710-14-370-7261

5360-99-751-2346 5360997512346 997512346 is an open coiled spring, wound in various forms and from different shapes and types of materials and finished at the ends, designed to provide resistance to compression forces. excludes springs designed for thermal actuation (springs in which the torsion forces are designed to be counteracted by changes in temperature) and spring, reinforcing, hose.

5305-01-390-8483 5305013908483 013908483 is an externally threaded fastener whose threaded portion is of one nominal diameter, no 0 (0.060 in./1.5 mm) or larger, designed to be held or driven with either a wrench or an inserted driver or both (excluding internal socket or internal multiple spline types), in sizes below no. 10 (0.190 in./5 mm). no. 10 and larger sizes must have a head designed for any type inserted driver (excluding internal socket or internal multiple spline types), but may also be designed for external wrenching. a locking feature may be incorporated in the design of the head or threads. excludes bolt, clevis; bolt, externally relieved body; screw, externally relieved body; and screw, assembled washer. see also, screw, instrument; bolt, machine; bolt, internal wrenching; and screw, cap socket head.

5360-99-602-7627 5360996027627 996027627 SPRING

Account Upgrade 5995-01-527-5971Electrical Special Purpose Cable Assembly5995015275971 015275971 087-210035
-001 087-210035 A definite continuous length of CABLE, SPECIAL PURPOSE, ELECTRICAL, having one or more
210126RNCC: D | RNVC: 9 | DAC: A 8 Feb 2005 5995-01-527-5971 Electrical Special Purpose Cable Assembly 087-210035

5310-01-690-2967 5310016902967 016902967 is a washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.