Premium Information is available for this item - Upgrade for $1 a day
4510-01-242-5449
Scullery Sink
4510012425449 012425449 3079K13
A sink having one or more compartment(s) with the depth of each compartment exceeding 9 inches. It may or may not be equipped with integral drainboard(s), and is designed for heavy galley or kitchen culinary washing service where a conventional kitchen sink would be inadequate. View more Scullery Sink
June 2023
3
Marketplace 4510-01-242-5449
Request a Quotation from participating marketplace vendors
Related Documents 4510-01-242-5449 1+ Documents (More...)
BUY NE FedMall Updated Every Day 3079K13 RQST NE Updated Every Day 4510-01-242-5449 RQST NE Updated
Every Day 4510-01-242-5449 RQST Updated Every Day 4510-01-242-5449 RQST NE Related Documents 4510-01
Restrictions 4510-01-242-5449
4510-01-242-5449 is a Scullery Sink that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
End Users 4510-01-242-5449
- US Air Force (FGGI)
- Effective Date:
- 1 Jul 2006
- Former MOE Rule:
- FGKZ
- US Navy (N9BZ)
- Effective Date:
- 1 Dec 2013
- Supplementary Collaborators:
- GG
Approved Sources 4510-01-242-5449
- Part Number
- Manufacturer
- Status
- 3079K13
- Manufacturer
- 39428 - Mcmaster-Carr Supply Co (Active)
- Primary Buy
- Primary Buy
Datasheet 4510-01-242-5449
- Characteristic
- Specifications
- FIIG
- Specifications
- T313-B
- Drain Opening Diameter [BJRH]
- 3.500 Inches Nominal
- Drain Opening Location [BJRJ]
- Center Of Each Compartment
- Center To Center Distance Between Hot/Cold Supply Openings [BJRL]
- 4.000 Inches Nominal
- Compartment Depth [BGZC]
- 10.000 Inches Nominal
- Compartment Quantity [AFPV]
- 2
- Material [MATT]
- Steel Corrosion Resisting
- Integral Drainboard [BJQW]
- Not Included
- Ledge Back [BJRC]
- Not Provided
- Rim Design [BJRD]
- Flat
- Separate Drinking Water Supply Opening [BJRN]
- Not Provided
- Overall Length [ABHP]
- 33.000 Inches Nominal
- Overall Width [ABMK]
- 22.000 Inches Nominal
- Specific Use [AFJF]
- Counter Top
- Spout Opening [BJRM]
- Not Provided
- Spray Opening [BJRP]
- Not Provided
- Splash Back [BJQY]
- Not Provided
- Splash Back Corner [BJQZ]
- Not Provided
- Steam Water Heater [BJRF]
- Not Included
- Supply Opening Location [BJRK]
- Ledge Back
DLA Procurement Analysis 4510-01-242-5449
Management Data 4510-01-242-5449
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
NATO Stock Numbers Related to 4510-01-242-5449
Freight Information 4510-01-242-5449
4510-01-242-5449 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 158880. A Sub NMFC of Z. It has a NMFC Description of PLUMBER'S GOODS:BATH FIXTURES. 4510-01-242-5449 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 77895 which rates the freight between FCL and LCL. 4510-01-242-5449 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 736 for ocean manifesting and military sealift. 4510-01-242-5449 is not classified as a special type of cargo when transported by water. 4510-01-242-5449 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 4510-01-242-5449
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Bare Metal Item
- 5lb to 7.5lb, all dimensions less than 24"
- Above 110G
- --
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Preservative Coating Only
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- --
- --
- --
- --
- Any Suitable Container
- No special marking
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- --
Contracting Technical Data File (CTDF) 4510-01-242-5449 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: