4420-01-589-2353

4 24 Sep 1998 1680-01-663-6775 Air Cooler H501 09-8347RNCC: 5 | RNVC: 2 | DAC: 1 18 May 2017 4420-01-589-2353

5365-01-648-3297 5365016483297 016483297 is a thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. it is designed to maintain a predetermined distance between two surfaces. for round items without a hole and having a solid rectangular cross-section use disk, solid, plain. items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. for items with thickness greater than those indicated above, see spacer, plate; washer, flat and spacer, ring. when thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. see also shim stock, laminated; shim stock assortment, gasket; and bearing, washer, thrust.

6695-00-076-2481 6695000762481 000762481 RUPTURE DISC ASSEMBLY

3040-01-649-9951 3040016499951 016499951 is a straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. it is not designed for use in aligning by fitting into corresponding holes of another item. it may be drilled for lubricating holes. for items having an integral gear(s) or worm(s), see gearshaft (as modified). for items designed to support rotating members see axle(1), straight. for items not having the above conditions see pin, straight, headless. for items having machined ends which constitute steps see shaft(1), shouldered; axle(1), shouldered; and bolt, fluid passage.

from United States (US) Jan 1900 3444-00-309-4825 1 Jan 1900 3444-00-309-4830 1 Jan 1900 3444-00-309-4828 1
Manual Presses (FSC 3444) Jan 1900 3444-00-309-4825 1 Jan 1900 3444-00-309-4830 1 Jan 1900 3444-00-309-4828 1