Premium Information is available for this item - Upgrade for $1 a day

4330-00-883-7488

Fluid Filter Element

4330008837488 008837488 1731002-00-40 1731002

A replaceable device designed to remove solid particles from fluids ranging in density from heavy liquids to gases. The removal of particles is accomplished by porous material (metallic or non-metallic), stacked disks, wound wire, or the like, constructed so the fluid can flow through the device while the solid particles are retained. It may be designed to fit into a FILTER, FLUID (or similar cavity), or it may have an integral outer casing and mounting facilities and be designed to connect directly to an engine, compressor, or the like. The degree of removal of particles must be nominally rated at less than 50 microns or absolutely rated at less than 75 microns. Excludes FILTER ELEMENT, AIR CONDITIONING. See also STRAINER ELEMENT, SEDIMENT. View more Fluid Filter Element

4330-00-883-7488 FILTER ELEMENT,FLUID 4330008837488 008837488

Managed by United States
NSN Created on 1 Jan 1962
Data Last Changed
May 2023
NATO Update Count
4
NATO Data Quality
STYL Style A6 for 4330-00-883-7488 1/1
NSN 4330-00-883-7488 (Identification) 1/1

4330-00-883-7488 Stock and Availability Marketplace 4330-00-883-7488

4330-00-883-7488 Related Documents Related Documents 4330-00-883-7488 5+ Documents (More...)

1560-00-173-1002 1560001731002 001731002 is an item attached to the aircraft structure, flight controls, and the like to permit a rotating, pivoting motion between two or more parts. includes provisions for a pin or pins, bushings, bearings, and the like in which pivoting motion occurs. see also hinge (1), door, aircraft.
5307-12-173-1002 5307121731002 121731002 is a headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. the maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). the unthreaded portion must be without locking or wrenching provisions. it may be thread relieved. see also rod, threaded end and rod, continuous thread.
3666Lock Switch5930121423666 121423666 330066 341003004 52EL161 1764-050 0 341 003 004 0217615 1731-002 1731002
RNCC 5 RNVC 2 DAC 6 1731-002 D8009 - Tadano Faun Gmbh (Active) Secondary Buy RNCC 5 RNVC 2 DAC 6 1731002

4330-00-883-7488 Demil Restrictions 4330-00-883-7488

DEMIL: A | DEMILI: 1 | CRITICALITY: X | HMIC: N | PMIC: U | EDC: | ADPEC:

4330-00-883-7488 is a Fluid Filter Element that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. The precious metals content of this item is unknown.

4330-00-883-7488 HTS and ScheduleB Import and Export 4330-00-883-7488

4330-00-883-7488 End Users End Users 4330-00-883-7488

US Air Force (FGGC)
Effective Date:
1 Apr 2005
Former MOE Rule:
FGAX

4330-00-883-7488 Manufacturers Approved Sources 4330-00-883-7488

4330-00-883-7488 Technical Data Datasheet 4330-00-883-7488

Characteristic
Specifications
FIIG
A24000
Body Diameter [ABPM]
1.710 Inches Minimum And 1.750 Inches Maximum
Body Inside Diameter [ADAS]
1.078 Inches Minimum And 1.250 Inches Maximum
Body Overall Length [AZTL]
4.438 Inches Minimum And 4.469 Inches Maximum
Design Type [APGF]
Reusable
Filtering Media Design [CRXW]
Woven Single Filtering Media Response
Filtration Rating In Microns [ADNH]
10.0 Nominal
Flow Direction [ADNK]
Outside In
Material [MATT]
Plastic Tetrafluoroethylene Seal
Material [MATT]
Steel Corrosion Resisting Body
Material [MATT]
Steel Corrosion Resisting Filtering Medium
Media For Which Designed [MEDA]
Fuel/Oil, Hydrocarbon
Style Designator [STYL]
Cylindrical W/Out Container
Special Features [FEAT]
With Unthreaded Mounting Hole 0.156 In. Dia.
Temp Rating [AZKQ]
-400.0 Deg Fahrenheit Minimum And 1200.0 Deg Fahrenheit Maximum

4330-00-883-7488 Stock, Inventory and Procurement DLA Procurement Analysis 4330-00-883-7488

DLA Administrative Lead Time:
Subscribe
DLA Production Lead Time:
Subscribe
Subscribe to View DLA Inventory and Forecast...

4330-00-883-7488 Management Data Management Data 4330-00-883-7488

Effective Date
Organization
Unit of Issue
Unit Price
Qty Unit Pack
Oct 2022
Defense Logistics Agency (DS)
EA
Subscribe
1
Oct 2021
Department of the Air Force (DF)
EA
Subscribe
1
Oct 2020
Department of the Air Force (DF)
EA
Subscribe
1
Feb 2020
Defense Logistics Agency (DS)
EA
Subscribe
1
Oct 2019
Department of the Air Force (DF)
EA
Subscribe
1

Air Force Air Force

Fund:
SF
Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
Budget:
9
57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
Price Validation Code:
N
The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of ā€œLā€ or ā€œFā€, then it must be evaluated locally where purchased or fabricated.
Expendability
Recoverability
Repairability:
P
Expendable. Reparable. Condemn at Intermediate. Stock Fund (except Munitions).

4330-00-883-7488 Related Items NATO Stock Numbers Related to 4330-00-883-7488

4330-00-883-7488 Freight Data Freight Information 4330-00-883-7488

4330-00-883-7488 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 069100. A Sub NMFC of Z. It has a NMFC Description of FILTERS:CARTRIDGES/ELEMENTS. 4330-00-883-7488 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 21275 which rates the freight between FCL and LCL. 4330-00-883-7488 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 594 for ocean manifesting and military sealift. 4330-00-883-7488 is not classified as a special type of cargo when transported by water. 4330-00-883-7488 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.

4330-00-883-7488 Packaging Data Packaging Data 4330-00-883-7488

Responsible Activity
Packaging Data Source
Primary Inventory Control Activity (PICA)
--

Item Pack Level (Unpackaged)

Item Size
Item Weight
Characteristics
Weight/Dimensions Category
Fragility
Item Preservation
--
--
Bare Metal Item
Over 10lb
Less than 85G
Special Requirement

Unit Pack Level (Packaged)

Quantity per Pack
Unit Size
Unit Weight
Unit Cube
Preservation Method
Cleaning/Drying
1
--
--
--
--
Any Suitable Process
Preservation Material
Wrapping Material
Cushioning/Dunnage
Cushioning Thickness
Container
Special Marking
No Requirement
--
--
--
PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
No special marking

Intermediate Pack Level

Quantity of Unit Packs
Container
ASTM-D5118, Type CF, Class Weather-Resistant, Corrugated Fiberboard Box

4330-00-883-7488 Contracting Technical Data File (CTDF) Contracting Technical Data File (CTDF) 4330-00-883-7488 October 2021

Criticality and Quality

Critical Item Code:
Flight Safety:
Life Support:
Certified Samples:
Serialization:
First Article Test (FAT):
Certificate of Quality Compliance:
Production Lot Testing:
Special Testing:
Qualified Products List (QPL):

Commercial Properties

Government Furnished Material:
Government Furnished Tooling:
Government Furnished Property:
Price Evaluation Code:
Diminshing Manufacturing Sources:
Warranty:
Commerical Off The Shelf (COTS):
End Item Application:
Auctioning Candidate:
Source of Procurement:
Contract Option:

Restrictions

Boeing Rights Guard:
Export Controlled:
Controlled Technical Data Package (TDP):
Restricted Technical Data Package (TDP):
Contains Classified Material
Weapons System Indicator Code (WSIC):
N

Packaging Requirements

Packaging Determination Table:
Packaging Review Code:
Special Packaging Instruction Number (SPIN):
Special Packaging Instruction Number Revision:
Special Packaging Instruction Number Date:
Pallet Reference Number Required: