4330-12-180-3018

/www.nsnlookup.com /nato/nato-stock-numbers/inc Liquid Fuel Water Separator (INC 17964) 2013 4330-12-180-3018

1979 4820-12-313-1842 Safety Relief Valve 351.453-40,0RNCC: 3 | RNVC: 2 | DAC: 3 9 Mar 1988 4330-12-180-3018

7610-27-020-3967 7610270203967 270203967 is a collection of two or more sheets of any length or shape, written or printed. the sheets are fastened together between covers and may be permanently bound or punched for permanent loose-leaf binding or stored on electronic media, containing no programs or software. does not include maintenance, installlation, and/or operating instructions applicable to one or more related pieces of equipment, see manual, technical. do not use if a more specific name exists, such as bible; dictionary; and hymnbook. see also book set.

5310-01-471-6479 5310014716479 014716479 is a metallic headed fastener having internal threads for a portion of the full length. it may have a smooth, hexagon or splined shank with an open or closed end. it is designed to be expanded tightly against the material it is being installed in by means of a special tool. the item must have a specified grip range. the grip range is the thickness of the material the item is being installed in. an integral feature is incorporated for locking on the threads of a mating member.

3120-14-204-3712 3120142043712 142043712 is an item of any peripheral shape usually having one flat or spherical surface and a centrally located hole. it is designed for applications involving moving (kinetic) loads. except for items fabricated from bearing quality synthetic (plastic) or composed of multilayer material, one bearing surface must either have a specific surface finish designation of 32 microinch (0.8 micrometre) or less, arithmetical average (aa) (arithmetic mean deviation) or one of the following conditions: be lapped or ground; have visible or detectable means of lubrication; grooves, indentations; or self-lubrication. the thickness must not exceed 25 percent of the outside diameter of the shortest distance between peripheral flats (when thickness and/or outside diameter is designated as a tolerance dimension, the maximum dimension will be used to determine compliance). excludes straight, tubular (without flange) items having a bearing surface(s) parallel to the axis of the bore only. see also washer, flat and spacer, sleeve.