4310-00-073-2020

4730-17-122-3088 4730171223088 171223088 is a clamp in which the body (band or wire) completely encircles an item and distributes a relatively even amount of pressure throughout the entire 360 degrees (6.282 radians) of the periphery of the item to be compressed. its compression quality is dependent upon an integral screw mechanism, (screw, bolt spring compression and the like mechanical fasteners), or it may be applied by a device not integral with the clamp itself. it is specifically designed to prevent leakage between a hose and its attaching connection(s) when the body of the clamp is round or circular. for square, rectangular, or irregularly shaped items, see clamp, hose, special-shaped. excludes clamp, electrical; clamp, loop; clamp, fire hose, shutoff; ferrule (as modified); and hand screw.

6210-15-122-3088 6210151223088 151223088 is an item designed to convey information of a specific nature concerning the circuit in which inserted. consists of two or more light, indicator.

5306-99-122-3088 5306991223088 991223088 is an externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. the head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. see also screw, cap, hexagon head and screw, machine.

5340-22-122-3088 5340221223088 221223088 is an item constructed of one or more layers of thin flexible material, either laminated or separated, designed to form a tight seal between the chambers of a valve, and to transmit pressure inducted motion to a valve disk either directly or through a mechanical linkage. the surface of the item must be formed or molded to have a beaded or rolled edge, ribs or any other raised surfaces. the item may contain bolt holes and/or center holes. excludes diaphra gm, valve, flat and gasket.

6145-25-122-3088 6145251223088 251223088 is a thin filament or ribbon of metal, designed to be part of a fuse or to act as a fuse to carry the current of a circuit and which all, or part of which, melts when the current exceeds a predetermined value for which it is rated. refers to bulk quantities only. for fabricated material designed to be the replaceable element of a fuse, see fuse link, electrical.