4310-14-255-9469

2 1 Jan 1970 4310-14-247-4610 Joint De Fond Pour 030015RNCC: 5 | RNVC: 9 | DAC: 6 1 Jan 1968 4310-14-255-9469
5342 Flat Washer 3519RNCC: 5 | RNVC: 9 | DAC: 6 1 Jan 1968 4130-14-261-4139 Clapet De Refouleme 524-525

6930-01-012-3160 6930010123160 010123160 INDICATOR SIMULATED

5315-00-012-3160 5315000123160 000123160 is a cylindrically-shaped headless item, having a shank at one or both ends. it is used for aligning, fastening, or transfer of torque and/or thrust by fitting into corresponding holes of another item. it may be threaded on one end.

5910-14-287-2792 5910142872792 142872792 is a capacitor, whose capacitance value cannot be adjusted or varied, having natural sheet mica or reconstituted flaked mica formed into sheets as the dielectric material. it may be a single unit, or consist of two or more fixed units which cannot be separated.

5310-01-646-3808 5310016463808 016463808 is a washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.