4210-15-134-6244
Guarnizione
4210151346244 151346244 PART7
Managed by Italy
NSN Created on 9 Oct 1996
Data Last Changed
January 2023
January 2023
NATO Update Count
1
1
NATO Data Quality
Marketplace 4210-15-134-6244
Need Help?
Request a Quotation from participating marketplace vendors
Request a Quotation from participating marketplace vendors
Related Documents 4210-15-134-6244 5+ Documents (More...)
RNVC: 2 | DAC: U 9 Oct 1996 5305-15-128-5278 Screw 01516RNCC: 3 | RNVC: 2 | DAC: 5 9 Oct 1996 4210-15-134-6244
5310-99-526-6205 5310995266205 995266205 is a washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.
5310-99-528-6516 5310995286516 995286516 is a washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.
5990-99-223-5359 5990992235359 992235359 ENCODER
2040-99-750-5215 2040997505215 997505215 RETRACTOR LATCH
Restrictions 4210-15-134-6244
End Users 4210-15-134-6244
- Italy (ZR)
Approved Sources 4210-15-134-6244
- Part Number
- Manufacturer
- Status
- PART7
- Manufacturer
- A1285 - Faro Knock Out Srl (Active)
- Primary Buy
- Primary Buy
NATO Stock Numbers Related to 4210-15-134-6244
2510-15-209-3009 2520-99-446-6108 6220-15-204-1528 9999-37-515-0085 5310-15-139-2426 9915-15-219-4601 1730-25-105-4112 1220-14-266-0252 4030-15-175-3668 6685-14-380-3542 1560-99-601-1385 1680-99-600-3219 1005-13-103-5661 2540-15-138-4766 4920-14-441-3681 5340-14-436-9248 2910-12-148-8383 5820-15-138-1601