4210-15-127-1185

Documents 4820-21-912-4478 5+ Documents ( More... ) https//www.nsnlookup.com /fsg-42/fsc-4210/it 4210-15-127-1185
Corpo 4210151271185 151271185,2603-1 4210-15-127-1185 4210151271185 151271185 CORPO https//www.nsnlookup.com

JavaScript in your web browser . 5998-21-906-8582Circuit Card Assembly5998219068582 219068582 ROF 654 2603/1
Documents 5998-21-906-8582 1+ Documents ( More... ) https//www.nsnlookup.com /fsg-42/fsc-4210/it 4210-15-127-1185
Corpo 4210151271185 151271185,2603-1 (Active) Primary Buy RNCC 3 RNVC 2 DAC 9 2603-1 https//www.nsnlookup.com

Upgrade your Account Upgrade 5998-01-022-7036Circuit Card Assembly5998010227036 010227036 2306-01 2603-1
Corpo 4210151271185 151271185,2603-1 instructions how to enable JavaScript in your web browser
. 4210-15-127-1185Corpo4210151271185 151271185 2603-1 in your web browser . 1330-25-100-1446Grenade Cartridge1330251001446

5950-00-298-2026 5950002982026 002982026 is a coil or coils usually constructed with cores having low magnetic reluctance, whose primary purpose is to furnish an inductive impedance in power or audio frequency circuit ranging from zero to 20 kilohertz (kilocycles). includes audio frequency and power filter chokes, audio reactors and swinging chokes. does not include transformers or coils used above audio frequency range. excludes saturable reactor. for reactors with air cores, see coil (as modified).

5306-00-045-1970 5306000451970 000451970 is a high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. the head is designed to accommodate an external wrench or driver. the head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. the unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. the nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. a locking feature may be incorporated in the design of the head or threads. see bolt, machine and bolt, clevis.