Premium Information is available for this item - Upgrade for $1 a day
4030-01-344-4411
Angle Chain Fastener
4030013444411 013444411 13D0021-033 13D0021-33
A strip of metal with a hole at either end. One is for mounting on flat surface, the other end is elevated upward for attaching the end termination(s) of another item. View more Angle Chain Fastener
May 2023
4
Marketplace 4030-01-344-4411
Request a Quotation from participating marketplace vendors
Related Documents 4030-01-344-4411 1+ Documents (More...)
BUY NE FedMall Updated Every Day 4030-01-344-4411 RQST NE Updated Every Day 4030-01-344-4411 RQST
Updated Every Day 4030-01-344-4411 RQST NE Related Documents 4030-01-344-4411 1+ Documents ( More...
Restrictions 4030-01-344-4411
4030-01-344-4411 is a Angle Chain Fastener that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
End Users 4030-01-344-4411
- US Air Force (FXGC)
- Effective Date:
- 1 Jul 2005
- Former MOE Rule:
- FXAX
Approved Sources 4030-01-344-4411
- Part Number
- Manufacturer
- Status
- 13D0021-033
- Manufacturer
- 31638 - Woodruff Corporation (Active)
- Primary Buy
- Primary Buy
- 13D0021-033
- 1Z537 - Buena Park Tool & Engineering, Inc (Active)
- Primary Buy
- Primary Buy
- 13D0021-033
- 0F658 - American Metals & Machining (Active)
- Primary Buy
- Primary Buy
- 13D0021-033
- 64106 - Am Machining, Inc. (Active)
- Primary Buy
- Primary Buy
- 13D0021-33
- 70265 - All Power Manufacturing Co. (Active)
- Secondary Buy
- Secondary Buy
- 13D0021-033
- 88277 - The Boeing Company (Active)
- Secondary Buy
- Secondary Buy
- 13D0021-033
- 59563 - Reid Products Inc. (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- 13D0021-33
- 86928 - Seastrom Manufacturing Co Inc (Active)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 4030-01-344-4411
- Characteristic
- Specifications
- FIIG
- Specifications
- A105A0
- Material [MATT]
- Steel Comp 301
- Material Document And Classification [MDCL]
- Mil-S-5059,Cond A Mil Spec Single Material Response
- Surface Treatment [SFTT]
- Passivate
- Surface Treatment Document And Classification [STDC]
- Qq-P-35 Fed Spec Single Treatment Response
- Style Designator [STYL]
- Tapered
- First Flat Length [ABNB]
- 0.738 Inches Nominal
- Second Flat Length [ABNE]
- 0.590 Inches Nominal
- First Hole Diameter [ABRC]
- 0.458 Inches Nominal
- Second Hole Diameter [ABRD]
- 0.125 Inches Nominal
- Overall Thickness [ADUM]
- 0.064 Inches Nominal
- Hole Center To Flat End Length [AGMS]
- 0.328 Inches Nominal
- Flat End Radius [AHHK]
- 0.328 Inches Nominal
- Elevated End Radius [AHHL]
- 0.125 Inches Nominal
- Hole Center To Elevated End Length [AHHM]
- 0.125 Inches Nominal
- Angle [CRMK]
- 15.0 Degrees Nominal
Weapon Systems (WSDC) 4030-01-344-4411
DLA Procurement Analysis 4030-01-344-4411
Management Data 4030-01-344-4411
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- SX
- SICA RESIDUAL MMAC-OC-ALC
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
NATO Stock Numbers Related to 4030-01-344-4411
Freight Information 4030-01-344-4411
4030-01-344-4411 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 105200. A Sub NMFC of X. It has a NMFC Description of FITTINGS CABLE/CHAIN/ROPE I/S. 4030-01-344-4411 is rated as class 50 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 54160 which rates the freight between FCL and LCL. 4030-01-344-4411 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 576 for ocean manifesting and military sealift. 4030-01-344-4411 is not classified as a special type of cargo when transported by water. 4030-01-344-4411 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 4030-01-344-4411
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Plated/Coated Item
- 2lb or less, one dimension 2" or less, other dimensions less than 24"
- Above 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- --
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- No Requirement
- No Requirement
- Not Applicable
- Bags made of material conforming to MIL-P-130, MIL-DTL-17667, MIL-PRF-121, or any material authorized by MIL-DTL-117. Closure may be by staples, tape, adhesive or heat seal
- No special marking
- No Requirement
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
Contracting Technical Data File (CTDF) 4030-01-344-4411 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- K
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: