4020-14-522-1243

: 2 | DAC: 2312357RNCC: 5 | RNVC: 9 | DAC: 4312357-109RNCC: 5 | RNVC: 9 | DAC: 4 25 May 2012 4020-14-522-1243

4730-00-057-0664 4730000570664 000570664 is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. one connecting end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube, the other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. it may have side or heel inlet(s). see also elbow, hose; connector, multiple, fluid pressure line; and elbow, swivel flange to hose.

3040-00-379-9248 3040003799248 003799248 is a shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. it must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (aa), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. the ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. it is not designed for use in aligning by fitting into corresponding holes of another item. for items used to support rotating members see axle(1), shouldered. for items not having any of the above conditions see pin, shoulder, headless. excludes shaft(1), straight; and axle(1), straight.

1020-00-159-2555 1020001592555 001592555 SHAFT

1020-00-159-2559 1020001592559 001592559 GEAR