4010-14-355-1725

Documents 4010-14-399-0298 5+ Documents ( More... ) https//www.nsnlookup.com /fsg-40/fsc-4010/fr 4010-14-355-1725
End Chain Link 4010143551725 143551725 https//www.nsnlookup.com /nato/nato-stock-numbers/inc End

https//www.nsnlookup.com /nato/nato-stock-numbers/inc End Chain Link (INC 05499) : 5 6 Mar 1985 4010-14-355-1725

5935-14-350-1118 5935143501118 143501118 is an electrical fitting with electrical contacts constructed to be affixed to the end of a cable, conduit, coaxial line, cord, wire (includes printed/etched), printed wiring board, or the like for convenience in joining with another electrical connector(s) or printed wiring board. it is designed to be mounted on a bulkhead, chassis, panel, wall, printed wiring board, or the like. excludes lampholder; jack, telephone; jack, tip; insert electrical connector; insert module, electrical connector; connector body (as modified) and socket, plug-in electronic components. see also wiring harness (as modified) and cable assembly (as modified). for items with termination wires of more than four inches in length, see lead assembly, electrical. for items without inserts, see shell, electrical connector.

5340-14-409-1118 5340144091118 144091118 is a metal item specifically designed to secure a structure to its foundation, or to anchor structural members in a fixed position. it may be straight or bent to form legs generally of unequal lengths. excludes brace, corner; and plate, mending; and item names with the basic names "bracket".

5365-14-518-1118 5365145181118 145181118 is a thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. it is designed to maintain a predetermined distance between two surfaces. for round items without a hole and having a solid rectangular cross-section use disk, solid, plain. items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. for items with thickness greater than those indicated above, see spacer, plate; washer, flat and spacer, ring. when thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. see also shim stock, laminated; shim stock assortment, gasket; and bearing, washer, thrust.