Premium Information is available for this item - Upgrade for $1 a day
3950-01-013-1449
Chain Hoist
3950010131449 010131449 MODEL 4224 6-20-3 L2E1HS 5-1BTT-15
A device designed to be suspended above deck, floor or ground level having one or more revolving whelped wheels over which a chain is passed for the purpose of raising or lowering a load. May be suspended so as to travel on a fixed track. View more Chain Hoist
Managed by United States
NSN Created on 27 Nov 1975
Data Last Changed
May 2023
May 2023
NATO Update Count
7
7
NATO Data Quality
Marketplace 3950-01-013-1449
Need Help?
Request a Quotation from participating marketplace vendors
Request a Quotation from participating marketplace vendors
Related Documents 3950-01-013-1449 5+ Documents (More...)
| DAC: 5 1 Jan 1962 3950-00-965-0096 Chain Hoist 4001ARNCC: 5 | RNVC: 9 | DAC: E 1 Jan 1960 3950-01-013-1449
5305-12-702-2692 5305127022692 127022692 is an externally threaded fastener designed for insertion into holes in assembled parts, for mating with a preformed internal thread and for tightening or releasing by torquing the head. the threaded and unthreaded portions are both of the same nominal diameter of 0.190 inch (5 mm) or larger. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. the thread length being the controlled dimension, the grip length is not specified. a locking feature may be incorporated in the design of the head or threads. the head is not designed to be held or driven with an inserted driver or by the thumb and fingers. excludes bolt,machine; bolt,externally relieved body; bolt,internal wrenching; and screw,cap,socket head.
5305-12-700-9876 5305127009876 127009876 is an externally threaded fastener designed for insertion into holes in assembled parts, for mating with a preformed internal thread and for tightening or releasing by torquing the head. the threaded and unthreaded portions are both of the same nominal diameter of 0.190 inch (5 mm) or larger. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. the thread length being the controlled dimension, the grip length is not specified. a locking feature may be incorporated in the design of the head or threads. the head is not designed to be held or driven with an inserted driver or by the thumb and fingers. excludes bolt,machine; bolt,externally relieved body; bolt,internal wrenching; and screw,cap,socket head.
965-0100 Chain Hoist MRNCC: C | RNVC: 1 | DAC: 6M0DEL MRNCC: C | RNVC: 1 | DAC: 6 1 Jan 1960 3950-01-013-1449
5305-12-702-2759 5305127022759 127022759 is an externally threaded fastener designed for insertion into holes in assembled parts, for mating with a preformed internal thread and for tightening or releasing by torquing the head. the threaded and unthreaded portions are both of the same nominal diameter of 0.190 inch (5 mm) or larger. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. the thread length being the controlled dimension, the grip length is not specified. a locking feature may be incorporated in the design of the head or threads. the head is not designed to be held or driven with an inserted driver or by the thumb and fingers. excludes bolt,machine; bolt,externally relieved body; bolt,internal wrenching; and screw,cap,socket head.
Restrictions 3950-01-013-1449
3950-01-013-1449 is a Chain Hoist that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. The precious metals content of this item is unknown.
End Users 3950-01-013-1449
- US Air Force (FGGC)
- Effective Date:
- 1 May 2006
- Former MOE Rule:
- FGAX
Approved Sources 3950-01-013-1449
- Part Number
- Manufacturer
- Status
- MODEL 4224
- Manufacturer
- 12128 - Columbus Mckinnon Corp Cm Hoist Div (Obsolete)
- Original Design
- Original Design
- 6-20-3
- 08136 - Be Wallace Products Corp (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- L2E1HS
- 4P412 - Ingersoll-Rand Company (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- L2E1HS
- 06550 - Ingersoll-Rand Co (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- 5-1BTT-15
- 08136 - Be Wallace Products Corp (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- L2E1HS
- 65853 - Ingersoll-Rand Co (Active)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 3950-01-013-1449
- Characteristic
- Specifications
- FIIG
- Specifications
- A02800
- Duty Cycle [AKPS]
- Intermittent
- Braking Method [ATWS]
- Electric
- Center To Center Distance Between Load Elements [ATWX]
- 17.000 Feet Nominal
- Chain Type [AJXY]
- Proof Coil
- Cooling Method [BFMF]
- Self-Ventilated
- Current Type [ACDC]
- Ac
- Environmental Protection [ADZC]
- Splash Proof
- Frequency In Hertz [FREQ]
- 60.0
- Hook Quantity [ATWT]
- 2
- Maximum Load Rating [AYXK]
- 2000.0 Pounds
- Mechanical Advantage Method [ATWR]
- Spur Gear
- Mounting Position [BBJX]
- Parallel
- Operation Method [APHE]
- Power
- Inclosure Type [AKNA]
- Partially Inclosed
- Load Element Quantity Per Hook [ATWW]
- 2
- Power Requirement Rating [ATYG]
- 1.00 Horsepower
- Prime Mover Quantity [AAXH]
- 1
- Prime Mover Type [AKDJ]
- Electric Motor
- Raised Position Distance Between Suspension Hook And Load Hook Bearing Surface [AWEW]
- 17.000 Inches Nominal
- Phase [FAAZ]
- Three
- Travel Rate Per Minute [ATWP]
- 16.0 Feet
- Voltage In Volts [ELEC]
- 220.0 And 440.0
- Suspension Mounting Method [AWEH]
- Hook
DLA Procurement Analysis 3950-01-013-1449
Management Data 3950-01-013-1449
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Price Validation Code:
- V
- The current standard price has been validated.
The item has been analyzed in conjunction with the Zero Overpricing Program and is in the accepted price range.
The item was procured under open competition and under the competitive arena the price is considered fair and reasonable.
ZOP or Standard price challenges are permissible but must be supported by adequate justification.
- Expendability
Recoverability
Repairability: - U
- Reparable. Condemn at Intermediate. AF Equipment Management System (AFEMS).
NATO Stock Numbers Related to 3950-01-013-1449
3950-21-642-0022 3950-99-374-5872 3950-99-366-8973 3950-26-301-0922 3950-12-169-0065 3950-21-642-0003 3950-22-617-3003 3950-25-123-2901 3950-37-518-5874 3950-22-620-5500 3950-99-701-7118 3950-21-876-8109 3950-17-120-2065 3950-99-776-4466 3950-22-607-8917 3950-01-526-0029 3950-12-386-7705 3950-37-527-1039
Freight Information 3950-01-013-1449
3950-01-013-1449 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 117040. A Sub NMFC of Z. It has a NMFC Description of CHAIN/PULLEY HOISTS/BLOCKS. 3950-01-013-1449 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 59830 which rates the freight between FCL and LCL. 3950-01-013-1449 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 793 for ocean manifesting and military sealift. 3950-01-013-1449 is not classified as a special type of cargo when transported by water. 3950-01-013-1449 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 3950-01-013-1449
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Bare Metal Item
- Over 10lb
- Less than 85G
- Special Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- --
- --
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- --
- --
- --
- --
- --
- No special marking
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- See Method of Preservation
- --
Contracting Technical Data File (CTDF) 3950-01-013-1449 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: