3940-14-476-6013
Hoisting Link
3940144766013 144766013 23CESLASMCRH012REP42
A rigid item which is less than three times as long as it is high. It includes an eye(s), ring(s), hole(s), loop(s), or the like, to facilitate hoisting and is designed to permit attaching such items as sling legs, shackles, rods, and hooks at two or more points. May include mounting hardware such as bolts, screw, washers and the like. Excludes SPREADER, SLING. See also BEAM, HOISTING. Do not use if a more specific name applies, such as RING, CONNECTING, ROUND and LINK, CHAIN, END. View more Hoisting Link
Managed by France
NSN Created on 21 Jun 1995
Data Last Changed
July 2023
July 2023
NATO Update Count
1
1
NATO Data Quality
Marketplace 3940-14-476-6013
Need Help?
Request a Quotation from participating marketplace vendors
Request a Quotation from participating marketplace vendors
Related Documents 3940-14-476-6013 5+ Documents (More...)
from France (FR) 6 1 Oct 2001 3940-14-541-1632 https//www.nsnlookup.com /fsg-39/fsc-3940/fr 3940-14-476-6013
Hoisting Link 3940144766013 144766013 https//www.nsnlookup.com /nato/nato-stock-numbers/inc Hoisting
Hoisting Link 3940144766013 144766013 https//www.nsnlookup.com /nato/nato-stock-numbers/inc Hoisting
462-0630 https//www.nsnlookup.com /nato/nato-stock-numbers/inc Hoisting Link (INC 22185) 2004 3940-14-476-6013
www.nsnlookup.com /fsg-39/fsc-3940 Blocks, Tackle, Rigging, and Slings from France (FR) 1976 3940-14-476-6013
5310-14-476-6015 5310144766015 144766015 is a washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.
5310-14-476-6014 5310144766014 144766014 is a nut, flat on top and bottom having 6 flat sides. for items which have internal tapered or straight (parallel) pipe threads, specific electrical conduit size designation, and which when installed, provide a method of tightening to lock the connection, see locknut, electrical conduit. see also locknut, tube fitting. for items having a thickness (or height) exceeding two times the width across the flats, use post, electrical-mechanical equipment. (when height or thickness and/or width across the flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance.)
Restrictions 3940-14-476-6013
Approved Sources 3940-14-476-6013
- Part Number
- Manufacturer
- Status
- 23CESLASMCRH012REP42
- Manufacturer
- F3015 - Naval Group Site De Lorient (Active)
- Primary Buy
- Primary Buy
NATO Stock Numbers Related to 3940-14-476-6013
3940-33-207-5365 3940-66-152-1569 3940-12-362-7381 4910-12-381-8287 3940-14-576-3302 3940-14-575-2376 3940-51-000-6247 3940-12-390-8617 3940-14-556-2746 4910-14-560-5476 3940-14-574-4755 3940-99-767-1678 3940-66-153-9382 4910-12-189-1578 3940-14-574-4756 3940-14-565-4990 3940-14-577-2661 3940-14-557-1417