3920-12-126-3946
Flat Washer
3920121263946 121263946 700710047
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. View more Flat Washer
January 2023
1
Marketplace 3920-12-126-3946
Request a Quotation from participating marketplace vendors
Related Documents 3920-12-126-3946 5+ Documents (More...)
Restrictions 3920-12-126-3946
Approved Sources 3920-12-126-3946
- Part Number
- Manufacturer
- Status
- 700710047
- Manufacturer
- C4309 - Lukas Hydraulik Gmbh (Active)
- Primary Buy
- Primary Buy
- 700710047
- D0129 - Ardie-Werk Gmbh Hydraulische (Replaced)
- Canceled/Obsolete
- Canceled/Obsolete
- 700710047
- D0249 - Thermo Fisher Scientific Messtechnik (Active)
- Canceled/Obsolete
- Canceled/Obsolete