3655-14-489-3381

5310-14-515-0926 5310145150926 145150926 ECROU GUIDE

5310-14-515-0933 5310145150933 145150933 is a bent spring metal washer with a centrally located hole. it is designed to exert pressure axially when assembled in place.

5330-14-489-3382 5330144893382 144893382 is a pliable rubber or composition ring-shaped element, split or jointless (solid) not encased in a metal shell, but having a spring, spreader and/or molded-in reinforcement. it is designed to be pressmounted between fixed and movable or moving parts to form a tight and effective seal.

5307-14-515-1075 5307145151075 145151075 is a headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. the maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). the unthreaded portion must be without locking or wrenching provisions. it may be thread relieved. see also rod, threaded end and rod, continuous thread.

5330-14-533-3528 5330145333528 145333528 is a circular shaped item designed to be installed in a specially prepared groove or counterbore to provide a low pressure seal. it may be supplied in various cross-sectional shapes and is cut through at one point to allow for installation and fitting. excludes items whose primary function is to provide sealing, wiping, or wearing surface capabilities for piston configurations. see also ring, piston and ring, wiper.