3510-99-561-2271

99-721-3739 Reciprocating Compressor Unit D/351VM/11/SPRNCC: 3 | RNVC: 1 | DAC: 4 6 Sep 2000 3510-99-561-2271

5330-33-102-1110 5330331021110 331021110 is any material specifically designed and constructed to resist deterioration from the action of heat, gas, chemicals or liquids and used to create a tight seal. it is supplied in loose form or in coils, spirals, spools or cut lengths, usually having a square or round cross section. for rubber items having a round cross section, see rubber round section. excludes rope, asbestos; calking cotton; and calking lead. see also packing, preformed; and oakum.

4820-12-382-7284 4820123827284 123827284 is a valve designed to automatically release excessive pressures. it is actuated by static pressure upstream of the valve and is used as a safety valve or relief valve, and may be set to close at a predetermined pressure. it is not designed for regulation of continuously fluctuating loads. it may be inline or cartridge (manifold) design. excludes valve (1), relief, pressure and temperature.

4820-12-382-7285 4820123827285 123827285 is a valve designed to automatically release excessive pressures. it is actuated by static pressure upstream of the valve and is used as a safety valve or relief valve, and may be set to close at a predetermined pressure. it is not designed for regulation of continuously fluctuating loads. it may be inline or cartridge (manifold) design. excludes valve (1), relief, pressure and temperature.

4330-00-069-6393 4330000696393 000696393 is a replaceable device designed to remove solid particles from fluids ranging in density from heavy liquids to gases. the removal of particles is accomplished by porous material (metallic or non-metallic), stacked disks, wound wire, or the like, constructed so the fluid can flow through the device while the solid particles are retained. it may be designed to fit into a filter, fluid (or similar cavity), or it may have an integral outer casing and mounting facilities and be designed to connect directly to an engine, compressor, or the like. the degree of removal of particles must be nominally rated at less than 50 microns or absolutely rated at less than 75 microns. excludes filter element, air conditioning. see also strainer element, sediment.