Premium Information is available for this item - Upgrade for $1 a day
3460-00-545-3317
Drill Chuck
3460005453317 005453317 GGG-C-350 30728 06266709 30B3-8-24 02027 849108 2812A38 W/KEY 30 30B 3/8-24 AND K30 02027 AND K30 R7-38
An accessory for holding tools with a plain cylindrical shank such as drills, taps, or the like, by means of two or more internal selfcentering (universal) jaws. It may be attached directly to the spindle of a machine, arbor, shaft, hand mechanism, or the like without the use of centers. The jaws are simultaneously adjusted by an adjusting nut, sleeve, feed screw, or the like. The maximum rated capacity of this item is one (1) inch (25.4 mm) diameter. For universal chucks having a capacity in excess of one (1) inch (25.4 mm), see CHUCK, UNIVERSAL JAW. Excludes CHUCK, CENTERING, LATHE. View more Drill Chuck
November 2023
18
Marketplace 3460-00-545-3317
Request a Quotation from participating marketplace vendors
Related Documents 3460-00-545-3317 5+ Documents (More...)
GGG-C-350 CHUCK,DRILL 9 EA NS Request Quotation Subscribe to View Vendor Details... 30728 CHUCK,DRILL
Updated Every Day 2812A38 W/KEY 30 RQST NE Updated Every Day 3460-00-545-3317 RQST NE Updated Every
RAR1296 VERONESI-849108 A flexible, tubular item having a nonmetallic tube inner conveying surface and
https//www.nsnlookup.com /fsg-34/fsc-3460/us 3460-00-545-3317 Drill Chuck 3460005453317 005453317,GGG-C
RAR1296 VERONESI-849108 A flexible, tubular item having a nonmetallic tube inner conveying surface and
fsg-47/fsc-4720/fr 4720-14-485-3808 Nonmetallic Hose 4720144853808144853808 849108RAR1296VERONESI-849108
www.nsnlookup.com /fsg-34/fsc-3460/au 3460-66-149-9498 Drill Chuck 3460661499498 661499498,06266709 06266709
www.nsnlookup.com /fsg-34/fsc-3460/au 3460-66-149-9498 https//www.nsnlookup.com /fsg-34/fsc-3460/us 3460-00-545-3317
United States (US) 4. 3460-00-397-2132 Marketplace Restrictions Approved Sources Datasheet Management GGG-C-350
Documents ( More... ) https//www.nsnlookup.com https//www.nsnlookup.com /fsg-34/fsc-3460/us 3460-00-545-3317
Restrictions 3460-00-545-3317
3460-00-545-3317 is a Drill Chuck that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 3460-00-545-3317
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3460-00-545-3317
- US Army (A921)
- Effective Date:
- 1 Jul 2006
- Former MOE Rule:
- A182
- US Air Force (FGGG)
- Effective Date:
- 1 Jul 2006
- Former MOE Rule:
- FGCX
- US Marine Corps (MC41)
- Effective Date:
- 1 Jul 2006
- Former MOE Rule:
- MC04
- US Navy (N9BG)
- Effective Date:
- 1 Jul 2006
- Former MOE Rule:
- N9GD
- Supplementary Collaborators:
- GTHD
- Australia (ZA01)
- Effective Date:
- 1 Jun 2010
- Canada (ZC01)
- Effective Date:
- 1 Apr 1991
- Greece (ZU01)
- Effective Date:
- 1 Apr 2008
Approved Sources 3460-00-545-3317
- Part Number
- Manufacturer
- Status
- 30728
- Manufacturer
- 75078 - Jacobs Mfg Co The (Active)
- Primary Buy
- Primary Buy
- GGG-C-350
- 81348 - Federal Specifications Promulgated (Active)
- Incomplete Standard
- Incomplete Standard
- 06266709
- ZD484 - J. Blackwood & Son Pty Ltd (Active)
- Secondary Buy
- Secondary Buy
- 30B3-8-24
- 75078 - Jacobs Mfg Co The (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- 02027
- 75078 - Jacobs Mfg Co The (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- 849108
- 86188 - Intool Inc (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- 849108
- 77566 - Reed Tubular Products Co (Obsolete)
- Canceled/Obsolete
- Canceled/Obsolete
- 2812A38 W/KEY 30
- 39428 - Mcmaster-Carr Supply Co (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- 30B 3/8-24 AND K30
- 75078 - Jacobs Mfg Co The (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- 02027 AND K30
- 75078 - Jacobs Mfg Co The (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- R7-38
- 56919 - Rohm Tool Corp (Obsolete)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 3460-00-545-3317
- Characteristic
- Specifications
- FIIG
- Specifications
- T182-H
- Arbor [BJWC]
- Not Included
- Attachment Type [BDHD]
- Threaded
- Attachment Method [ABSX]
- Arbor Hole
- Attachment Size Designation [BJWD]
- 3/8-24 Unf
- Bearing Type [ACSK]
- Plain
- Nondefinitive Spec/Std Data [ZZZT]
- 2 Class And 1 Type
- Unit Type [APQB]
- 3-Jaw Key
- Performance Type [AGLD]
- Heavy Duty
- Tool Size Accommodated [BJWF]
- 0.313 Inches Nominal
Weapon Systems (WSDC) 3460-00-545-3317
DLA Procurement Analysis 3460-00-545-3317
- Last Stock Position:
- 22 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 3460-00-545-3317
Army
- Materiel Category and Inventory Manager:
- E
- General Supplies (DLA/GSA Items)
- Appropriation and Budget Activity:
- 2
- Stock Fund Secondary Items
- Management Inventory Segment:
- 2
- Non-Repairable Items(Exclusive of Insurance and Provisioning Items)
This code will be used to identify items, which are not reparable.
- Weapons System / End Item / Homogeneous Group:
- 00
- DLA/GSA Material
DLA/GSA-Managed Items that cannot be identified to a specific Army Weapons Systems/End Item
- Accounting Requirements:
- X
- Expendable item.An item of Army property coded with an ARC of X in the AMDF. Expendable items require no formal accountability after issue from a stock record account.Commercial and fabricated items similar to items coded X in the AMDF are considered expendable items.
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Marine Corps
- Stores Account:
- 1
- Stock Fund Account Item
- Combat Essentiality:
- 2
- Non-Critical Repair Part
- Echelon Management:
- B2
- Operational Test:
- No Special Procedures
Similar Supply Items to 3460-00-545-3317
Freight Information 3460-00-545-3317
3460-00-545-3317 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 184130. A Sub NMFC of X. It has a NMFC Description of TOOLS:CHUCKS DRILL BIT HOLDING I/S. 3460-00-545-3317 is rated as class 77.5 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 90287 which rates the freight between FCL and LCL. 3460-00-545-3317 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 732 for ocean manifesting and military sealift. 3460-00-545-3317 is not classified as a special type of cargo when transported by water. 3460-00-545-3317 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 3460-00-545-3317
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Bare Metal Item
- Over 10lb
- Less than 85G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- --
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- --
- --
- --
- Special requirement – See specific instructions or drawings provided
- No special marking
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- See Method of Preservation
- --
Procurement History 3460-00-545-3317 2 Records
Contracting Technical Data File (CTDF) 3460-00-545-3317 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- J
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: