Premium Information is available for this item - Upgrade for $1 a day
3460-00-231-2258
Drill Chuck
3460002312258 002312258 A-A-51140 CL1 STC SZ7 GGG-C-350
An accessory for holding tools with a plain cylindrical shank such as drills, taps, or the like, by means of two or more internal selfcentering (universal) jaws. It may be attached directly to the spindle of a machine, arbor, shaft, hand mechanism, or the like without the use of centers. The jaws are simultaneously adjusted by an adjusting nut, sleeve, feed screw, or the like. The maximum rated capacity of this item is one (1) inch (25.4 mm) diameter. For universal chucks having a capacity in excess of one (1) inch (25.4 mm), see CHUCK, UNIVERSAL JAW. Excludes CHUCK, CENTERING, LATHE. View more Drill Chuck
August 2023
12
Marketplace 3460-00-231-2258
Request a Quotation from participating marketplace vendors
Related Documents 3460-00-231-2258 5+ Documents (More...)
GGG-C-350 CHUCK,DRILL 9 EA NS Request Quotation Updated Every 15 Minutes 3460-00-540-1084 BUY NE Updated
Agency (DS)IZDiscontinued-Use 3460-00-540-1084 https//www.nsnlookup.com /fsg-34/fsc-3460/us 3460-00-231-2258
-350 CHUCK,DRILL 9 EA NS Request Quotation Updated DAC 3 GGG-C-350 81348 - Federal Specifications (Active
TY1CL1YNA AA51140-1A18 GGG-C-350 A-A-50970 https//www.nsnlookup.com /fsg-34/fsc-3460/us 3460-00-
A hand tool designed for tightening or https//www.nsnlookup.com /fsg-34/fsc-3460/us 3460-00-231-2258
Drill Chuck 3460002312258 002312258 GGG-C-350 TY1CL2 An accessory for holding tools with a plain
F 22 Sep 1977 3460-01-006-6048 Drill Chuck 33B-A1/2-20RNCC: 3 | RNVC: 2 | DAC: 6 19 Jul 1975 3460-00-231-2258
Drill Chuck A-A-51140 CL1 STC SZ7RNCC: 2 | RNVC: 2 | DAC: E 1 Jan 1963 3460-00-189-4624 Drill Chuck GGG-C-350
GGG-C-350 TY1CL2 An accessory for holding tools with a plain cylindrical shank such as drills, taps
GGG-C-350 CHUCK,DRILL 9 EA NS Request Quotation Updated Every Day 3460-00-053-0676 RQST NE Updated Every
Restrictions 3460-00-231-2258
3460-00-231-2258 is a Drill Chuck that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. The precious metals content of this item is unknown.
Import and Export 3460-00-231-2258
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3460-00-231-2258
- US Army (A921)
- Effective Date:
- 1 Jul 2006
- Former MOE Rule:
- A182
- Supplementary Receivers:
- BF
- US Air Force (FGGG)
- Effective Date:
- 1 Jul 2006
- Former MOE Rule:
- FGCX
- US Marine Corps (MC41)
- Effective Date:
- 1 Jul 2006
- Former MOE Rule:
- MC04
- Belgium (ZB01)
- Effective Date:
- 1 Apr 1991
- Republic of Korea (ZH01)
- Effective Date:
- 1 Apr 1991
- Greece (ZU01)
- Effective Date:
- 1 Apr 1991
- Turkey (ZW01)
- Effective Date:
- 1 Nov 2005
Approved Sources 3460-00-231-2258
- Part Number
- Manufacturer
- Status
- A-A-51140 CL1 STC SZ7
- Manufacturer
- 58536 - Federal Commercial Item Description (Active)
- Definitive Standard
- Definitive Standard
- GGG-C-350
- 81348 - Federal Specifications (Active)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 3460-00-231-2258
- Characteristic
- Specifications
- FIIG
- Specifications
- T182-H
- Arbor [BJWC]
- Included
- Attachment Type [BDHD]
- Morse Taper
- Attachment Method [ABSX]
- Arbor Hole
- Attachment Size Designation [BJWD]
- No. 2 Morse Taper Shank
- Bearing Type [ACSK]
- Ball
- Nondefinitive Spec/Std Data [ZZZT]
- 1 Class And C Style And 7 Size
- Unit Type [APQB]
- 3-Jaw Key
- Performance Type [AGLD]
- Heavy Duty
- Special Features [FEAT]
- Carbor Iaw Cid A-A-50970 Sz 15
- Tool Size Accommodated [BJWF]
- 0.125 Inches Minimum And 0.750 Inches Maximum
DLA Procurement Analysis 3460-00-231-2258
- Last Stock Position:
- 2 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 3460-00-231-2258
- Effective Date
- Organization
- Unit of Issue
- Unit Price
- Qty Unit Pack
- Unit of Issue
- Oct 2022
- Department of the Air Force (DF)
- EA
- Subscribe
- 1
- EA
- Jan 2022
- Defense Logistics Agency (DS)
- EA
- Subscribe
- 1
- EA
- Oct 2021
- US Marine Corps (DM)
- EA
- Subscribe
- 1
- EA
- Oct 2020
- Department of the Air Force (DF)
- EA
- Subscribe
- 1
- EA
- Oct 2019
- Department of the Army (DA)
- EA
- Subscribe
- 1
- EA
Army
- Materiel Category and Inventory Manager:
- E
- General Supplies (DLA/GSA Items)
- Appropriation and Budget Activity:
- 2
- Stock Fund Secondary Items
- Management Inventory Segment:
- 2
- Non-Repairable Items(Exclusive of Insurance and Provisioning Items)
This code will be used to identify items, which are not reparable.
- Weapons System / End Item / Homogeneous Group:
- 00
- DLA/GSA Material
DLA/GSA-Managed Items that cannot be identified to a specific Army Weapons Systems/End Item
- Accounting Requirements:
- X
- Expendable item.An item of Army property coded with an ARC of X in the AMDF. Expendable items require no formal accountability after issue from a stock record account.Commercial and fabricated items similar to items coded X in the AMDF are considered expendable items.
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Price Validation Code:
- V
- The current standard price has been validated.
The item has been analyzed in conjunction with the Zero Overpricing Program and is in the accepted price range.
The item was procured under open competition and under the competitive arena the price is considered fair and reasonable.
ZOP or Standard price challenges are permissible but must be supported by adequate justification.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Marine Corps
- Stores Account:
- 1
- Stock Fund Account Item
- Combat Essentiality:
- 5
- Critical Repair Part to a Combat Essential End Item
- Echelon Management:
- B2
- Material Identification:
- K
- Reserved
- Operational Test:
- No Special Procedures
NATO Stock Numbers Related to 3460-00-231-2258
Freight Information 3460-00-231-2258
3460-00-231-2258 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 184130. A Sub NMFC of X. It has a NMFC Description of TOOLS:CHUCKS DRILL BIT HOLDING I/S. 3460-00-231-2258 is rated as class 77.5 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 90287 which rates the freight between FCL and LCL. 3460-00-231-2258 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 732 for ocean manifesting and military sealift. 3460-00-231-2258 is not classified as a special type of cargo when transported by water. 3460-00-231-2258 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 3460-00-231-2258
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Electrical Instrument
- Over 10lb
- Less than 85G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- --
- --
- --
- --
- No special marking
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- 10
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
Contracting Technical Data File (CTDF) 3460-00-231-2258 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: