What is Federal Supply Class 3460?

FSC 3460 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 3460) in the USA for supply items codified in the category of Machine Tool accessories.

What is NATO Supply Classification Class 3460?

NSC 3460 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 3460 in the USA) for supply items codified in the category of Machine Tool accessories.

Which Federal Supply Group is FSC 3460 in?

FSC 3460 is in Federal Supply Group (FSG) 34 which contains Metalworking Machinery.

Which NATO Supply Classification Group is NSC 3460 in?

NSC 3460is in NATO Supply Classification Group (NSG) 34 which contains Metalworking Machinery.

What is an Abrasive Wheel?

An Abrasive Wheel (WHEEL,ABRASIVE) is a rigid piece of abrasive with or without mounting facilities. Items having such mounting facilities as a fixed spindle, a threaded insert, or an arbor hole are designed for mounting on a grinding machine, tool chuck or mandrel. Items without mounting facilities are designed to be secured in a wheel holder by means of spring clamps.

What is a Bench And Machine Table Vise?

A Bench And Machine Table Vise (VISE,BENCH AND MACHINE TABLE) is a clamping device consisting of a base and two jaws mounted on a subbase. The subbase is designed for mounting on a workbench and is not normally mounted on a machine table. The base and jaw assembly may be readily detached from the subbase for use on a drilling machine, milling machine, grinding machine and the like.

A V-Block is a fixture of cast iron or steel, precision ground, having one or more V grooves machined parallel and squared with respect to the bottom, top, and ends. The block may have milled grooves on the sides to accommodate clamps which are used for holding cylindrical work.

What is a Matched V-Block Set?

A Matched V-Block Set (V-BLOCK SET,MATCHED) is a set of two or more matched V-blocks.

What is a Machine Table Vise?

A Machine Table Vise (VISE,MACHINE TABLE) is a clamping device consisting of a base and two jaws for use on a drilling machine, milling machine, grinding machine and the like. The base may be of stationary type or may be designed for angular adjustment. It may be bolt, screw, or strap clamp mounted or flat surface for resting upon the machine table. Excludes VISE, BENCH AND MACHINE TABLE.

What is a Shell Reamer Arbor?

A Shell Reamer Arbor (ARBOR,SHELL REAMER) is a bar of special steel, machined and ground, having a Morse taper or a straight shank. The body end is tapered for mounting the cutter, which also has a taper slightly smaller to assure a tight fit. It is used on drilling and milling machines for holding shell reamers.

What is a Vertical Jack?

A Vertical Jack (JACK,VERTICAL) is a device consisting of a bracing or lifting screw with nut and a flat base. Neither base nor screw revolve, the adjustment for height being made by turning the nut. It is used for leveling work on machine tools, layout and inspection tables.

What is a Grinding-Buffing-Wire Brush Wheel Arbor?

A Grinding-Buffing-Wire Brush Wheel Arbor (ARBOR,WHEEL,GRINDING-BUFFING-WIRE BRUSH) is a bar of steel, machined or ground, with flange(s) and/or steel nut or machine screw. Used with drill chucks, lathe chucks, machine shafts and the like for mounting abrasive wheels, buffing wheels and wire wheels. See also ADAPTER, SPINDLE, PORTABLE SANDER.

What is a Drill Holder?

A Drill Holder (HOLDER,DRILL) is a tool accessory used to hold a drill while drilling with a lathe. Excludes CHUCK, DRILL.

What is a Straight Shank Tool Socket?

A Straight Shank Tool Socket (SOCKET,STRAIGHT SHANK TOOL) is a machine socket adapter for extending the length of tool sockets and/or for converting the size of sockets to size of straight tool shanks.

What is a Taper Shank Tool Socket?

A Taper Shank Tool Socket (SOCKET,TAPER SHANK TOOL) is a machine socket adapter for extending the length of tool sockets and/or for converting the size of sockets to size of taper tool shanks.

What is a Lathe Center?

A Lathe Center (CENTER,LATHE) is a device having a straight or tapered shank with a shaped head used as a bearing or support for the work.

What is a Drill Chuck?

A Drill Chuck (CHUCK,DRILL) is an accessory for holding tools with a plain cylindrical shank such as drills, taps, or the like, by means of two or more internal selfcentering (universal) jaws. It may be attached directly to the spindle of a machine, arbor, shaft, hand mechanism, or the like without the use of centers. The jaws are simultaneously adjusted by an adjusting nut, sleeve, feed screw, or the like. The maximum rated capacity of this item is one (1) inch (25.4 mm) diameter. For universal chucks having a capacity in excess of one (1) inch (25.4 mm), see CHUCK, UNIVERSAL JAW. Excludes CHUCK, CENTERING, LATHE.

What is a Machine Collet?

A Machine Collet (COLLET,MACHINE) is a work holding device consisting of a longitudinally slotted sleeve which has a tapering or conical end designed to fit into a corresponding taper of a chuck so that the lengthwise movement of the sleeve causes a contraction or expansion of the gripping surfaces. The gripping or holding tension is actuated by a backward pull (draw in) or by a forward push (force in). Used on lathes, milling machines, screw machines and the like. Excludes SOCKET, STRAIGHT SHANK TOOL and SOCKET, TAPER SHANK TOOL.

A Lathe Dog (DOG,LATHE) is a machine tool accessory used as a clamp for gripping a piece of work and conveying motion to it from the face plate.

What is an Independent Jaw Chuck?

An Independent Jaw Chuck (CHUCK,INDEPENDENT JAW) is an accessory used for holding objects directly to the spindle of a machine, arbor, shaft or the like without the use of centers. Two or more jaws are adjusted separately, each by its own adjusting screw, to facilitate holding objects of irregular shape.

What is an Universal Jaw Chuck?

An Universal Jaw Chuck (CHUCK,UNIVERSAL JAW) is an accessory used for holding objects directly to the spindle of a machine, arbor, shaft, or the like, without the use of centers. Two or more self-centering jaws are adjusted simultaneously, usually by rotation of a scroll gear which engages slots or teeth in the back of the jaws. Maximum rated capacity is in excess of one (1) inch (25.4 mm) diameter. For universal chucks having a maximum capacity of one (1) inch (25.4 mm) or less, see CHUCK, DRILL. Excludes CHUCK, CENTERING, LATHE.

What is a Cutting Tool Holder?

A Cutting Tool Holder (HOLDER,CUTTING TOOL) is an accessory designed to hold and support cutter bits or sleeve type boring bars of various types and sizes. It is used on lathes, automatic machines, planers, and shapers. Excludes items such as tool posts.

What is a Boring Tool Bar?

A Boring Tool Bar (BAR,BORING TOOL) is an internal turning tool, usually having a single cutting point, used to enlarge a hole, to finish to size, and to insure its being true with a specificed center line.

What is a Counterbore Pilot?

A Counterbore Pilot (PILOT,COUNTERBORE) is excludes PILOT, COUNTERSINK.

What is a Countersink Pilot?

A Countersink Pilot (PILOT,COUNTERSINK) is a device specifically designed for use in conjunction with a HOLDER, COUNTERSINK to guide and align countersink cutters. Excludes PILOT, COUNTERBORE.

What is a Solid Machine Mandrel?

A Solid Machine Mandrel (MANDREL,MACHINE,SOLID) is a cylindrical-shaped tool with a slight taper on the over-all length, centered on each end with a flat milled on the ends for a holder. It is used for holding work for machining operations on lathes and milling machines.

What is a Machine Tool Attachment Grinding Machine?

A Machine Tool Attachment Grinding Machine (GRINDING MACHINE,MACHINE TOOL ATTACHMENT) is a motor driven device consisting of an abrasive wheel attached either directly to the motor shaft or to a spindle unit which is driven by a belt and an electric motor. May be used on lathes, milling machines, boring mills, shapers and slotters for grinding surface plates, rolls, journals, lathe centers, internal bores, external surfaces, or the like.

What is an Expansion Mandrel?

An Expansion Mandrel (MANDREL,EXPANSION) is a holding tool, tapered on the over-all length and centered on both ends with a flat milled or ground on one end for aholder which, together with a flexible sleeve, is forcibly inserted into the work to support it for machining operations on lathes or milling machines.

What is a Milling Cutter Arbor?

A Milling Cutter Arbor (ARBOR,MILLING CUTTER) is a bar of special steel, machined and ground, having a standard milling machine, Morse or Brown and Sharpe taper shank and furnished with or without bearing sleeves. It is used for mounting plain hole milling cutters of various types and sizes.

What is a Counterbore Holder?

A Counterbore Holder (HOLDER,COUNTERBORE) is a cylindrical body having a straight or tapered shank which holds the cutter in place by driving lugs or two splines 180 degrees (3.1 radians) apart. It is used extensively on screw machines and boring mills. Excludes HOLDER, COUNTERSINK.

What is a Countersink Holder?

A Countersink Holder (HOLDER,COUNTERSINK) is a cylindrical shaped device specifically designed to hold and position, as well as to control the cutting depth of a COUNTERSINK. The holder may have a micrometer stop adjustment or a plain sleeve with nut adjustment. Countersink cutters accommodated by this holder are of a specific design. Excludes HOLDER, COUNTERBORE.

What is a Milling Machine Spindle End Adapter?

A Milling Machine Spindle End Adapter (ADAPTER,SPINDLE END,MILLING MACHINE) is an adapter designed to fit into the end of a milling machine spindle and accommodate various cutting tool holders and/or end milling cutters having shanks of different types and sizes. See also ARBOR (as modified).

What is a Shell End Mill Arbor?

A Shell End Mill Arbor (ARBOR,SHELL END MILL) is a bar of special steel, machined and ground, having a standard milling machine or a Brown and Sharpe tapered shank. The body ends are ground to various diameters for mounting the different sizes of shell and mill cutters. It is used with adapters on milling machines having standardized spindle end and Brown and Sharpe milling machines having taper-nose or threaded spindles.

What is a Wheel Dressing Diamond Nib?

A Wheel Dressing Diamond Nib (NIB,DIAMOND,WHEEL DRESSING) is an item consisting of an industrial diamond mounted in the end of a metal rod or bar and exposed to provide a cutting point or edge. It is used for truing, shaping, and dressing abrasive wheels. When in use, it is mounted in a suitable holder on a stand or machine and its movement across the wheel surface may be either manual or machine powered.

What is a Cylinder Hone Stone And Holder?

A Cylinder Hone Stone And Holder (STONE AND HOLDER,CYLINDER HONE) is a mounted length of abrasive or combination of abrasive and cork. The stone is integral with the mount for use in conjunction with a cylinder honing tool.

What is a Buffing Wheel?

A Buffing Wheel (WHEEL,BUFFING) is a disk shaped item of loose, bonded, or solid construction having an arbor hole for attaching to a rotary power-operated tool or machine. It may be fabricated of a single piece of felt, rubber, leather, cork, or the like; a single piece of wood, leather covered; or plies of muslin, flannel, canvass, or the like sewed or cemented together. It is used for buffing and/or polishing or burnishing. Excludes BRUSH, ROTARY (as modified); WHEEL, ABRASIVE; and PAD, POLISHING AND RUBBING.

What is a Rotary Wheel Wire Brush?

A Rotary Wheel Wire Brush (BRUSH,WIRE,ROTARY WHEEL) is a disk shaped unit having a fill section of wire material extending from the perimeter of the disk perpendicular to the axis of the hub. It is used with a rotary power-operated device for roughing, buffing and/or polishing various surfaces. See also BRUSH, WIRE, ROTARY CUP; BRUSH, WIRE, ROTARY END; and BRUSH, FIBER, ROTARY WHEEL.

What is an Abrasive Wheel Set?

An Abrasive Wheel Set (WHEEL SET,ABRASIVE) is a group of items consisting of two or more WHEEL, ABRASIVE, of various shapes and grits, with or without mounting facilities. This may include a case or holder for storage of the items.

What is an Expansion Mandrel Set?

An Expansion Mandrel Set (MANDREL SET,EXPANSION) is a group of two or more MANDREL, EXPANSION.

What is a Drill Chuck Key?

A Drill Chuck Key (KEY,DRILL CHUCK) is a hand tool designed for tightening or loosening the jaws of a drill chuck.

What is a Lapping Plate?

A Lapping Plate (PLATE,LAPPING) is a round, rectangular, or square-shaped item manufactured from various metals. By comparison, its thickness is less than its length, width, or diameter. The lap (abrading surface) has narrow V-shaped or straight-sided grooves to facilitate abrading. Used to produce a geometrically flat or smooth surface by abrasion. Excludes BLOCK, LAPPING. See also PLATE, DUPLEX, SURFACE AND LAPPING and PLATE, SURFACE.

What is a Lapping Block?

A Lapping Block (BLOCK,LAPPING) is a cast iron item of solid (not ribbed) rectangular construction with plain surface(s) suitable for hand application to the part to be lapped. See also PLATE, DUPLEX, SURFACE AND LAPPING; PLATE, LAPPING; and PLATE, SURFACE.

What is a Quick Change Chuck?

A Quick Change Chuck (CHUCK,QUICK CHANGE) is an item used to hold tools, such as drills, reamers, and the like without the use of jaws. It employs a sliding collar mechanism which engages a removable adapter to facilitate installation or removal of the tool.

What is a Quick Change Chuck Adapter?

A Quick Change Chuck Adapter (ADAPTER,QUICK CHANGE CHUCK) is a cylindrical shaped item designed to hold various cutting tools and to simplify their installation in or removal from a quick change type chuck.

What is a Portable Power Tool Counterbalance?

A Portable Power Tool Counterbalance (COUNTERBALANCE,PORTABLE POWER TOOL) is a device consisting of an adjustable spring actuated drum or reel and a wire cable having a lifting eye or hook on one end. It is designed for aerial suspension over the work bench, assembly line or the like in holding tools in counterbalanced suspension.

What is an Indexing Fixture?

An Indexing Fixture is an item designed to accurately select any degree of angle for milling, grinding, drilling, or boring operations. It is not furnished with a work-holding device such as a chuck or vise. It may be furnished with centers. It may be of the automatic angle selector type, manual (perforated disk) angle selector type, or optical system positioning type. It may consist of two units (a head and a tail-stock). Excludes HOLDING FIXTURE, COLLET CHUCKING, MACHINE.

What is a Milling-Grinding-Drilling-Slotting Attachment?

A Milling-Grinding-Drilling-Slotting Attachment is a motor driven unit for milling, grinding, drilling, boring, slotting, gear cutting, thread milling, keyseating and external and internal grinding operations. It is adapted for mounting on a lathe, planer, shaper and/or boring mill. May also be used as a portable self-contained unit suitable for mounting on the item being worked, or bench mounting when provided with a feed table.

What is a Polishing And Rubbing Pad?

A Polishing And Rubbing Pad (PAD,POLISHING AND RUBBING) is a flat, circular disk of flexible or semiflexible fabric designed for attachment to a backing pad or polishing holder of a power driven polisher or disk buffer, used for polishing and rubbing. Excludes WHEEL, BUFFING.

What is a Lathe Centering Chuck?

A Lathe Centering Chuck (CHUCK,CENTERING,LATHE) is an item designed for centering and supporting round work without centers, such as centerless armature shafts and the like, in the tailstock of small engine lathes by means of three or more self-centering brass or bronze jaws, or an adjustable collet type brass or bronze bushing. The jaws or bushing may be adjusted for either running fit or driving fit on the round work. It is attached to the lathe by means of a tapered shank. Excludes CHUCK, DRILL and CHUCK, UNIVERSAL JAW.

What is an Indexing Fixture Plate?

An Indexing Fixture Plate (PLATE,INDEXING FIXTURE) is a disk shaped item containing equally spaced holes around the face. It is used on an INDEXING FIXTURE to divide a 360 degree rotation of work into equal arcs.

What is an Expansion Mandrel Sleeve?

An Expansion Mandrel Sleeve (SLEEVE,EXPANSION MANDREL) is a cylindrical spring type metal expansion sleeve which is a component of a MANDREL, EXPANSION.

Machine Tool accessories - United States (US)

Federal Supply Class (FSC): 3460

NATO Supply Classification Class (NSC): 3460

Federal Supply Group (FSG): 34 Metalworking Machinery

NATO Supply Classification Group (NSG): 34 Metalworking Machinery

Items Managed by United States (US) - NCB is 00 to 09

Page 19 of 24

NSN Format for Machine Tool accessories
Codified by United States

34	60	01	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 3460 is a classification for Machine Tool Accessories within NATO Supply Group 34, which is dedicated to Metalworking Machinery.

Machine Tool Accessories refer to a wide range of tools and equipment that are used in conjunction with machine tools to enhance their functionality and performance. These accessories can include items such as cutting tools, tool holders, workholding devices, measuring instruments, lubrication systems, and other components that are essential for the operation and maintenance of machine tools.

The purpose of NATO Supply Class 3460 is to provide a standardized classification system for machine tool accessories within the NATO military alliance. This classification system helps to streamline procurement processes and ensure compatibility and interoperability among different NATO member countries.

By categorizing machine tool accessories under NATO Supply Class 3460, it becomes easier for military organizations and defense contractors to identify, source, and procure the necessary accessories for their metalworking machinery. This classification system also facilitates inventory management and logistics planning for military operations involving metalworking machinery.

In summary, NATO Supply Class 3460 for Machine Tool Accessories in NATO Supply Group 34 for Metalworking Machinery is a classification system that helps to organize and standardize the procurement and use of machine tool accessories within the NATO military alliance.

FSC 3460 Machine Tool accessories - United States (US)

Excludes Abrasive Wheels, Cones, and other Abrasive Attachments for use only on Hand Held Power Tools.

Frequently Asked Questions(FAQ) for Federal Supply Class 3460

What is Federal Supply Class 3460?: FSC 3460 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 3460) in the USA for supply items codified in the category of Machine Tool accessories.
What is NATO Supply Classification Class 3460?: NSC 3460 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 3460 in the USA) for supply items codified in the category of Machine Tool accessories.
Which Federal Supply Group is FSC 3460 in?: FSC 3460 is in Federal Supply Group (FSG) 34 which contains Metalworking Machinery.
Which NATO Supply Classification Group is NSC 3460 in?: NSC 3460 is in NATO Supply Classification Group (NSG) 34 which contains Metalworking Machinery.

Supply Items Included in Federal Supply Class 3460

What is an Abrasive Wheel? 1115 Items: An Abrasive Wheel (WHEEL,ABRASIVE) is a rigid piece of abrasive with or without mounting facilities. Items having such mounting facilities as a fixed spindle, a threaded insert, or an arbor hole are designed for mounting on a grinding machine, tool chuck or mandrel. Items without mounting facilities are designed to be secured in a wheel holder by means of spring clamps.
What is a Bench And Machine Table Vise? 15 Items: A Bench And Machine Table Vise (VISE,BENCH AND MACHINE TABLE) is a clamping device consisting of a base and two jaws mounted on a subbase. The subbase is designed for mounting on a workbench and is not normally mounted on a machine table. The base and jaw assembly may be readily detached from the subbase for use on a drilling machine, milling machine, grinding machine and the like.
Clamp,Parallel,Machinist's 22 Items
What is a V-Block? 59 Items: A V-Block is a fixture of cast iron or steel, precision ground, having one or more V grooves machined parallel and squared with respect to the bottom, top, and ends. The block may have milled grooves on the sides to accommodate clamps which are used for holding cylindrical work.
What is a Matched V-Block Set? 14 Items: A Matched V-Block Set (V-BLOCK SET,MATCHED) is a set of two or more matched V-blocks.
What is a Machine Table Vise? 38 Items: A Machine Table Vise (VISE,MACHINE TABLE) is a clamping device consisting of a base and two jaws for use on a drilling machine, milling machine, grinding machine and the like. The base may be of stationary type or may be designed for angular adjustment. It may be bolt, screw, or strap clamp mounted or flat surface for resting upon the machine table. Excludes VISE, BENCH AND MACHINE TABLE.
What is a Shell Reamer Arbor? 15 Items: A Shell Reamer Arbor (ARBOR,SHELL REAMER) is a bar of special steel, machined and ground, having a Morse taper or a straight shank. The body end is tapered for mounting the cutter, which also has a taper slightly smaller to assure a tight fit. It is used on drilling and milling machines for holding shell reamers.
What is a Vertical Jack? 20 Items: A Vertical Jack (JACK,VERTICAL) is a device consisting of a bracing or lifting screw with nut and a flat base. Neither base nor screw revolve, the adjustment for height being made by turning the nut. It is used for leveling work on machine tools, layout and inspection tables.
What is a Grinding-Buffing-Wire Brush Wheel Arbor? 12 Items: A Grinding-Buffing-Wire Brush Wheel Arbor (ARBOR,WHEEL,GRINDING-BUFFING-WIRE BRUSH) is a bar of steel, machined or ground, with flange(s) and/or steel nut or machine screw. Used with drill chucks, lathe chucks, machine shafts and the like for mounting abrasive wheels, buffing wheels and wire wheels. See also ADAPTER, SPINDLE, PORTABLE SANDER.
What is a Drill Holder? 11 Items: A Drill Holder (HOLDER,DRILL) is a tool accessory used to hold a drill while drilling with a lathe. Excludes CHUCK, DRILL.
What is a Straight Shank Tool Socket? 10 Items: A Straight Shank Tool Socket (SOCKET,STRAIGHT SHANK TOOL) is a machine socket adapter for extending the length of tool sockets and/or for converting the size of sockets to size of straight tool shanks.
What is a Taper Shank Tool Socket? 75 Items: A Taper Shank Tool Socket (SOCKET,TAPER SHANK TOOL) is a machine socket adapter for extending the length of tool sockets and/or for converting the size of sockets to size of taper tool shanks.
What is a Lathe Center? 64 Items: A Lathe Center (CENTER,LATHE) is a device having a straight or tapered shank with a shaped head used as a bearing or support for the work.
What is a Drill Chuck? 124 Items: A Drill Chuck (CHUCK,DRILL) is an accessory for holding tools with a plain cylindrical shank such as drills, taps, or the like, by means of two or more internal selfcentering (universal) jaws. It may be attached directly to the spindle of a machine, arbor, shaft, hand mechanism, or the like without the use of centers. The jaws are simultaneously adjusted by an adjusting nut, sleeve, feed screw, or the like. The maximum rated capacity of this item is one (1) inch (25.4 mm) diameter. For universal chucks having a capacity in excess of one (1) inch (25.4 mm), see CHUCK, UNIVERSAL JAW. Excludes CHUCK, CENTERING, LATHE.
What is a Machine Collet? 420 Items: A Machine Collet (COLLET,MACHINE) is a work holding device consisting of a longitudinally slotted sleeve which has a tapering or conical end designed to fit into a corresponding taper of a chuck so that the lengthwise movement of the sleeve causes a contraction or expansion of the gripping surfaces. The gripping or holding tension is actuated by a backward pull (draw in) or by a forward push (force in). Used on lathes, milling machines, screw machines and the like. Excludes SOCKET, STRAIGHT SHANK TOOL and SOCKET, TAPER SHANK TOOL.
What is a Lathe Dog? 53 Items: A Lathe Dog (DOG,LATHE) is a machine tool accessory used as a clamp for gripping a piece of work and conveying motion to it from the face plate.
What is an Independent Jaw Chuck? 21 Items: An Independent Jaw Chuck (CHUCK,INDEPENDENT JAW) is an accessory used for holding objects directly to the spindle of a machine, arbor, shaft or the like without the use of centers. Two or more jaws are adjusted separately, each by its own adjusting screw, to facilitate holding objects of irregular shape.
What is an Universal Jaw Chuck? 56 Items: An Universal Jaw Chuck (CHUCK,UNIVERSAL JAW) is an accessory used for holding objects directly to the spindle of a machine, arbor, shaft, or the like, without the use of centers. Two or more self-centering jaws are adjusted simultaneously, usually by rotation of a scroll gear which engages slots or teeth in the back of the jaws. Maximum rated capacity is in excess of one (1) inch (25.4 mm) diameter. For universal chucks having a maximum capacity of one (1) inch (25.4 mm) or less, see CHUCK, DRILL. Excludes CHUCK, CENTERING, LATHE.
What is a Cutting Tool Holder? 360 Items: A Cutting Tool Holder (HOLDER,CUTTING TOOL) is an accessory designed to hold and support cutter bits or sleeve type boring bars of various types and sizes. It is used on lathes, automatic machines, planers, and shapers. Excludes items such as tool posts.
What is a Boring Tool Bar? 124 Items: A Boring Tool Bar (BAR,BORING TOOL) is an internal turning tool, usually having a single cutting point, used to enlarge a hole, to finish to size, and to insure its being true with a specificed center line.
What is a Counterbore Pilot? 148 Items: A Counterbore Pilot (PILOT,COUNTERBORE) is excludes PILOT, COUNTERSINK.
What is a Countersink Pilot? 56 Items: A Countersink Pilot (PILOT,COUNTERSINK) is a device specifically designed for use in conjunction with a HOLDER, COUNTERSINK to guide and align countersink cutters. Excludes PILOT, COUNTERBORE.
What is a Solid Machine Mandrel? 184 Items: A Solid Machine Mandrel (MANDREL,MACHINE,SOLID) is a cylindrical-shaped tool with a slight taper on the over-all length, centered on each end with a flat milled on the ends for a holder. It is used for holding work for machining operations on lathes and milling machines.
What is a Machine Tool Attachment Grinding Machine? 44 Items: A Machine Tool Attachment Grinding Machine (GRINDING MACHINE,MACHINE TOOL ATTACHMENT) is a motor driven device consisting of an abrasive wheel attached either directly to the motor shaft or to a spindle unit which is driven by a belt and an electric motor. May be used on lathes, milling machines, boring mills, shapers and slotters for grinding surface plates, rolls, journals, lathe centers, internal bores, external surfaces, or the like.
What is an Expansion Mandrel? 127 Items: An Expansion Mandrel (MANDREL,EXPANSION) is a holding tool, tapered on the over-all length and centered on both ends with a flat milled or ground on one end for aholder which, together with a flexible sleeve, is forcibly inserted into the work to support it for machining operations on lathes or milling machines.
What is a Milling Cutter Arbor? 35 Items: A Milling Cutter Arbor (ARBOR,MILLING CUTTER) is a bar of special steel, machined and ground, having a standard milling machine, Morse or Brown and Sharpe taper shank and furnished with or without bearing sleeves. It is used for mounting plain hole milling cutters of various types and sizes.
What is a Counterbore Holder? 17 Items: A Counterbore Holder (HOLDER,COUNTERBORE) is a cylindrical body having a straight or tapered shank which holds the cutter in place by driving lugs or two splines 180 degrees (3.1 radians) apart. It is used extensively on screw machines and boring mills. Excludes HOLDER, COUNTERSINK.
What is a Countersink Holder? 28 Items: A Countersink Holder (HOLDER,COUNTERSINK) is a cylindrical shaped device specifically designed to hold and position, as well as to control the cutting depth of a COUNTERSINK. The holder may have a micrometer stop adjustment or a plain sleeve with nut adjustment. Countersink cutters accommodated by this holder are of a specific design. Excludes HOLDER, COUNTERBORE.
What is a Milling Machine Spindle End Adapter? 26 Items: A Milling Machine Spindle End Adapter (ADAPTER,SPINDLE END,MILLING MACHINE) is an adapter designed to fit into the end of a milling machine spindle and accommodate various cutting tool holders and/or end milling cutters having shanks of different types and sizes. See also ARBOR (as modified).
Arbor,Hole Saw 61 Items
What is a Shell End Mill Arbor? 10 Items: A Shell End Mill Arbor (ARBOR,SHELL END MILL) is a bar of special steel, machined and ground, having a standard milling machine or a Brown and Sharpe tapered shank. The body ends are ground to various diameters for mounting the different sizes of shell and mill cutters. It is used with adapters on milling machines having standardized spindle end and Brown and Sharpe milling machines having taper-nose or threaded spindles.
What is a Wheel Dressing Diamond Nib? 27 Items: A Wheel Dressing Diamond Nib (NIB,DIAMOND,WHEEL DRESSING) is an item consisting of an industrial diamond mounted in the end of a metal rod or bar and exposed to provide a cutting point or edge. It is used for truing, shaping, and dressing abrasive wheels. When in use, it is mounted in a suitable holder on a stand or machine and its movement across the wheel surface may be either manual or machine powered.
What is a Cylinder Hone Stone And Holder? 23 Items: A Cylinder Hone Stone And Holder (STONE AND HOLDER,CYLINDER HONE) is a mounted length of abrasive or combination of abrasive and cork. The stone is integral with the mount for use in conjunction with a cylinder honing tool.
Arbor,Drill Chuck 47 Items
What is a Buffing Wheel? 30 Items: A Buffing Wheel (WHEEL,BUFFING) is a disk shaped item of loose, bonded, or solid construction having an arbor hole for attaching to a rotary power-operated tool or machine. It may be fabricated of a single piece of felt, rubber, leather, cork, or the like; a single piece of wood, leather covered; or plies of muslin, flannel, canvass, or the like sewed or cemented together. It is used for buffing and/or polishing or burnishing. Excludes BRUSH, ROTARY (as modified); WHEEL, ABRASIVE; and PAD, POLISHING AND RUBBING.
What is a Rotary Wheel Wire Brush? 16 Items: A Rotary Wheel Wire Brush (BRUSH,WIRE,ROTARY WHEEL) is a disk shaped unit having a fill section of wire material extending from the perimeter of the disk perpendicular to the axis of the hub. It is used with a rotary power-operated device for roughing, buffing and/or polishing various surfaces. See also BRUSH, WIRE, ROTARY CUP; BRUSH, WIRE, ROTARY END; and BRUSH, FIBER, ROTARY WHEEL.
What is an Abrasive Wheel Set? 14 Items: An Abrasive Wheel Set (WHEEL SET,ABRASIVE) is a group of items consisting of two or more WHEEL, ABRASIVE, of various shapes and grits, with or without mounting facilities. This may include a case or holder for storage of the items.
What is an Expansion Mandrel Set? 22 Items: An Expansion Mandrel Set (MANDREL SET,EXPANSION) is a group of two or more MANDREL, EXPANSION.
What is a Drill Chuck Key? 55 Items: A Drill Chuck Key (KEY,DRILL CHUCK) is a hand tool designed for tightening or loosening the jaws of a drill chuck.
Collet Set,Machine 27 Items
Head,Boring 20 Items
What is a Lapping Plate? 67 Items: A Lapping Plate (PLATE,LAPPING) is a round, rectangular, or square-shaped item manufactured from various metals. By comparison, its thickness is less than its length, width, or diameter. The lap (abrading surface) has narrow V-shaped or straight-sided grooves to facilitate abrading. Used to produce a geometrically flat or smooth surface by abrasion. Excludes BLOCK, LAPPING. See also PLATE, DUPLEX, SURFACE AND LAPPING and PLATE, SURFACE.
What is a Lapping Block? 24 Items: A Lapping Block (BLOCK,LAPPING) is a cast iron item of solid (not ribbed) rectangular construction with plain surface(s) suitable for hand application to the part to be lapped. See also PLATE, DUPLEX, SURFACE AND LAPPING; PLATE, LAPPING; and PLATE, SURFACE.
What is a Quick Change Chuck? 35 Items: A Quick Change Chuck (CHUCK,QUICK CHANGE) is an item used to hold tools, such as drills, reamers, and the like without the use of jaws. It employs a sliding collar mechanism which engages a removable adapter to facilitate installation or removal of the tool.
What is a Quick Change Chuck Adapter? 35 Items: A Quick Change Chuck Adapter (ADAPTER,QUICK CHANGE CHUCK) is a cylindrical shaped item designed to hold various cutting tools and to simplify their installation in or removal from a quick change type chuck.
What is a Portable Power Tool Counterbalance? 10 Items: A Portable Power Tool Counterbalance (COUNTERBALANCE,PORTABLE POWER TOOL) is a device consisting of an adjustable spring actuated drum or reel and a wire cable having a lifting eye or hook on one end. It is designed for aerial suspension over the work bench, assembly line or the like in holding tools in counterbalanced suspension.
Clamp,Parallel,Toolmaker's 10 Items
What is an Indexing Fixture? 32 Items: An Indexing Fixture is an item designed to accurately select any degree of angle for milling, grinding, drilling, or boring operations. It is not furnished with a work-holding device such as a chuck or vise. It may be furnished with centers. It may be of the automatic angle selector type, manual (perforated disk) angle selector type, or optical system positioning type. It may consist of two units (a head and a tail-stock). Excludes HOLDING FIXTURE, COLLET CHUCKING, MACHINE.
What is a Milling-Grinding-Drilling-Slotting Attachment? 15 Items: A Milling-Grinding-Drilling-Slotting Attachment is a motor driven unit for milling, grinding, drilling, boring, slotting, gear cutting, thread milling, keyseating and external and internal grinding operations. It is adapted for mounting on a lathe, planer, shaper and/or boring mill. May also be used as a portable self-contained unit suitable for mounting on the item being worked, or bench mounting when provided with a feed table.
What is a Polishing And Rubbing Pad? 13 Items: A Polishing And Rubbing Pad (PAD,POLISHING AND RUBBING) is a flat, circular disk of flexible or semiflexible fabric designed for attachment to a backing pad or polishing holder of a power driven polisher or disk buffer, used for polishing and rubbing. Excludes WHEEL, BUFFING.
What is a Lathe Centering Chuck? 10 Items: A Lathe Centering Chuck (CHUCK,CENTERING,LATHE) is an item designed for centering and supporting round work without centers, such as centerless armature shafts and the like, in the tailstock of small engine lathes by means of three or more self-centering brass or bronze jaws, or an adjustable collet type brass or bronze bushing. The jaws or bushing may be adjusted for either running fit or driving fit on the round work. It is attached to the lathe by means of a tapered shank. Excludes CHUCK, DRILL and CHUCK, UNIVERSAL JAW.
What is an Indexing Fixture Plate? 16 Items: An Indexing Fixture Plate (PLATE,INDEXING FIXTURE) is a disk shaped item containing equally spaced holes around the face. It is used on an INDEXING FIXTURE to divide a 360 degree rotation of work into equal arcs.
What is an Expansion Mandrel Sleeve? 273 Items: An Expansion Mandrel Sleeve (SLEEVE,EXPANSION MANDREL) is a cylindrical spring type metal expansion sleeve which is a component of a MANDREL, EXPANSION.
What is a Portable Metalworking Machinery Coolant Unit? 13 Items: A Portable Metalworking Machinery Coolant Unit (COOLANT UNIT,METALWORKING MACHINERY,PORTABLE) is a device consisting of a tank, pump, and fluid delivery assembly(ies), used to deliver coolant fluid to metalworking machinery not equipped with integral coolant systems.
What is a Tube Bending Mandrel? 76 Items: A Tube Bending Mandrel (MANDREL,TUBE BENDING) is a tool that may be either flexible or rigid, designed to be inserted into a tube or hollow section to support the wall and prevent it from flattening or collapsing during bending operations. It is used with a BENDING MACHINE, PIPE AND CONDUIT.
What is a Positioning Table? 33 Items: A Positioning Table (TABLE,POSITIONING) is an item designed to accurately position another item for inspection, testing, maintenance or machining. The item is capable of linear and/or rotational movement but is not furnished with a work-holding device such as a chuck or vise. It may be manually operated or motor driven. Excludes POSITIONER, WELDING.
What is a Hold Down Machine Clamp? 119 Items: A Hold Down Machine Clamp (CLAMP,MACHINE,HOLD DOWN) is a clamp for holding down work on planer, punch presses, milling machines, boring mills, drill presses and the like.
What is a Machine Cleaning Wiper? 42 Items: A Machine Cleaning Wiper (WIPER,MACHINE CLEANING) is an item designed to remove fluids, dust, hot chips and other contaminants from surfaces and tool ways during normal operation of the equipment.
What is a Metalworking Machinery Fixture? 49 Items: A Metalworking Machinery Fixture (FIXTURE,METALWORKING MACHINERY) is an item mounted on a machine table and designed for clamping and releasing a workpiece in volume production. The item may operate as a vertical or horozontal fixture, depending on the induvidual design type.
Holder Section,Cutting Tool 12 Items
What is a Milling Machine Honing Mandrel? 66 Items: A Milling Machine Honing Mandrel (MANDREL,HONING,MILLING MACHINE) is a metal item machined and ground with an integral shank. May have an integral guide shoe that retains and turns a dressing stone. Used in finishing inside surfaces.
What is a Jaw Clamp Insert Set? 16 Items: A Jaw Clamp Insert Set (INSERT SET,JAW CLAMP) is two matched items which fit into the opposing faces of the jaw(s) of a clamp or vise. They permit an item which has a curved surface to be held without damage due to crushing or squeezing during machining operations. Excludes FAIRLEAD, BLOCK.
What is a Lathe Steady Rest? 11 Items: A Lathe Steady Rest (STEADY REST,LATHE) is an accessory, with one or more friction or roller type adjustable jaws, designed to support round material during the machining process. It may be bed or carriage mounted.
What is a Collet Chuck? 104 Items: A Collet Chuck (CHUCK,COLLET) is an item designed to be adapted to a machine spindle to accommodate a collet for holding work to be machined. It may be mounted directly to the spindle or to an arbor or adapter which in turn mounts to the spindle. The chuck is manipulated to contract or expand the collet which in turn grips or releases the work. Excludes HOLDING FIXTURE, COLLET CHUCKING, MACHINE.

Stock Items From Supply Class 3460 Page 19 of 24

3460-01-294-9075
Machine Collet

012949075
6290010: RNCC: 3 | RNVC: 2

24 Feb 1989

3460-01-294-6540
Machine Collet

012946540
6290007: RNCC: 3 | RNVC: 2

19 Feb 1989

3460-01-294-6541
Machine Collet

012946541
6290008: RNCC: 3 | RNVC: 2

19 Feb 1989

3460-01-294-6542
Machine Collet

012946542
6290009: RNCC: 3 | RNVC: 2

19 Feb 1989

3460-01-294-6539
Machine Collet

012946539
6290006: RNCC: 3 | RNVC: 2

19 Feb 1989

3460-01-294-6310
Cutting Tool Holder

012946310
PWA70311: RNCC: 3 | RNVC: 2

18 Feb 1989

3460-01-294-6311
Cutting Tool Holder

012946311
PWA70304: RNCC: 3 | RNVC: 2

18 Feb 1989

3460-01-294-6308
Lapping Plate

012946308
T92-49035: RNCC: 3 | RNVC: 2

18 Feb 1989

3460-01-291-4355
Abrasive Wheel

012914355
66243528828: RNCC: 3 | RNVC: 2
60312: RNCC: 5 | RNVC: 9
6900001: RNCC: 5 | RNVC: 9

28 Dec 1988

3460-01-290-8803
Independent Jaw Chuck

012908803
660-200-0-28: RNCC: 3 | RNVC: 9
660-200-0-28: RNCC: 5 | RNVC: 9

17 Dec 1988

3460-01-290-6431
Abrasive Wheel

012906431
613406: RNCC: 3 | RNVC: 2

14 Dec 1988

3460-01-289-4756
Abrasive Wheel

012894756
WA80-JV805: RNCC: 3 | RNVC: 2

23 Nov 1988

3460-01-289-4755
Abrasive Wheel

012894755
B74.2 A24R4B 2-1/2X1/2X3/8: RNCC: 3 | RNVC: 1
B7.1: RNCC: 5 | RNVC: 1
B74.13: RNCC: 5 | RNVC: 1
A24R4BA2: RNCC: 5 | RNVC: 9

23 Nov 1988

3460-01-289-4754
Abrasive Wheel

012894754
B74.2 A24RB 3X3/8X3/8: RNCC: 3 | RNVC: 1
B7.1: RNCC: 5 | RNVC: 1
B74.13: RNCC: 5 | RNVC: 1
A24TBRA 3/8X3X3/8: RNCC: 5 | RNVC: 9

23 Nov 1988

3460-01-289-2764
Abrasive Wheel

012892764
3A46R5BA2 BLPNT 14322618: RNCC: 3 | RNVC: 2

20 Nov 1988

3460-01-285-1534
Solid Machine Mandrel

012851534
PWA57295: RNCC: 3 | RNVC: 2

8 Sep 1988

3460-01-284-6439
Solenoid Pilot

012846439
9305B: RNCC: 3 | RNVC: 2
9305B: RNCC: 3 | RNVC: 9
9305B: RNCC: 5 | RNVC: 9

28 Aug 1988

3460-01-282-0185
Expansion Mandrel Sleeve

012820185
1929F39IT3: RNCC: 3 | RNVC: 1
1D45937IT6: RNCC: 5 | RNVC: 1

6 Jul 1988

3460-01-281-5496
Boring Tool Bar

012815496
EBN2A: RNCC: 3 | RNVC: 9

25 Jun 1988

3460-01-281-4438
Hydraulic Drifter Chuck

012814438
1055443: RNCC: 3 | RNVC: 9

23 Jun 1988

3460-01-281-3546
Machine Table Vise

012813546
15-026: RNCC: 3 | RNVC: 2

22 Jun 1988

3460-01-281-0355
Cutting Tool Holder

012810355
MTP361TLZ: RNCC: 3 | RNVC: 2
MTP361TLZ: RNCC: 5 | RNVC: 9

16 Jun 1988

3460-01-280-8176
Sleeve Collet

012808176
34518: RNCC: 3 | RNVC: 2
5P0281: RNCC: 5 | RNVC: 2

13 Jun 1988

3460-01-280-4867
Abutment Rear Collet

012804867
5P0283: RNCC: 3 | RNVC: 2
34520: RNCC: 5 | RNVC: 2

11 Jun 1988

3460-01-280-4157
Hose Tool Half Collet

012804157
34516: RNCC: 3 | RNVC: 2
5P0279: RNCC: 3 | RNVC: 2
5P279: RNCC: D | RNVC: 9

9 Jun 1988

3460-01-280-4158
Sleeve Collet

012804158
34517: RNCC: 3 | RNVC: 2
5P0280: RNCC: 5 | RNVC: 2
5P280: RNCC: 5 | RNVC: 9

9 Jun 1988

3460-01-279-8758
Quick Change Set

012798758
81-374: RNCC: 3 | RNVC: 9
81-374: RNCC: 5 | RNVC: 2
81-374: RNCC: 5 | RNVC: 9

26 May 1988

3460-01-279-7641
Boring Tool Bar

012797641
EBN-1: RNCC: 3 | RNVC: 9

25 May 1988

3460-01-279-6301
Cutting Tool Holder

012796301
MRGNL206D: RNCC: 3 | RNVC: 2

21 May 1988

3460-01-279-6273
Milling Machine Drawbar

012796273
898-071-732: RNCC: 3 | RNVC: 2

21 May 1988

3460-01-279-3503
Machine Collet Set

012793503
9400045: RNCC: 3 | RNVC: 2

17 May 1988

3460-01-277-4511
Tool Post Holder

012774511
150.2-25-6: RNCC: 3 | RNVC: 9

22 Apr 1988

3460-01-277-3431
Hose Collet

012773431
34447: RNCC: 3 | RNVC: 2
5P0273: RNCC: 5 | RNVC: 2

20 Apr 1988

3460-01-277-3430
Hose Collet

012773430
34446: RNCC: 3 | RNVC: 2
5P0272: RNCC: 5 | RNVC: 2

20 Apr 1988

3460-01-276-1205
Rock Drill Chuck

012761205
R-118367: RNCC: 3 | RNVC: 2

4 Apr 1988

3460-01-275-6204
Stem Collet

012756204
35089: RNCC: 3 | RNVC: 2
5P0968: RNCC: 5 | RNVC: 2

23 Mar 1988

3460-01-275-2785
Lathe Center

012752785
67210-SP: RNCC: 3 | RNVC: 2

19 Mar 1988

3460-01-275-2466
Hose Tool Half Collet

012752466
34445: RNCC: 3 | RNVC: 2
5P0271: RNCC: 5 | RNVC: 2

19 Mar 1988

3460-01-275-2467
Stem Collet

012752467
34454: RNCC: 3 | RNVC: 2
5P0967: RNCC: 5 | RNVC: 2
5P967: RNCC: 5 | RNVC: 9

19 Mar 1988

3460-01-275-2465
Hose Tool Half Collet

012752465
34443: RNCC: 3 | RNVC: 2
5P0268: RNCC: 5 | RNVC: 9
5P268: RNCC: 5 | RNVC: 9

19 Mar 1988

3460-01-274-3784
Machine Collet

012743784
903-5912051 PC6: RNCC: 3 | RNVC: 9

8 Mar 1988

3460-01-274-2517
Machine Collet

012742517
C84-1310: RNCC: 3 | RNVC: 2

6 Mar 1988

3460-01-272-4753
Cutting Tool Holder

012724753
2838: RNCC: 3 | RNVC: 9

9 Feb 1988

3460-01-272-4631
Cutting Tool Holder

012724631
2837: RNCC: 3 | RNVC: 9

9 Feb 1988

3460-01-272-4630
Cutting Tool Holder

012724630
2008: RNCC: 3 | RNVC: 9

9 Feb 1988

3460-01-271-7160
Cutting Tool Holder

012717160
MCKNL 164D: RNCC: 3 | RNVC: 2
MCKNL164: RNCC: 5 | RNVC: 9

29 Jan 1988

3460-01-271-2245
Lathe Steady Rest

012712245
FIGURE 6-9: RNCC: 3 | RNVC: 9

21 Jan 1988

3460-01-269-4950
Anti-Static Ion Flow Grids

012694950
SSI008: RNCC: 3 | RNVC: 2

17 Dec 1987

3460-01-267-7350
Expansion Mandrel Sleeve

012677350
S-463: RNCC: 3 | RNVC: 2

17 Nov 1987

3460-01-267-7089
End Mill Adapter

012677089
2533 1507: RNCC: 3 | RNVC: 9

17 Nov 1987

3460-01-261-5834
Shield Hold Down

012615834
B4036468: RNCC: 3 | RNVC: 2

16 Aug 1987

3460-01-261-4434
Taper Shank Tool Socket

012614434
729-240267: RNCC: 3 | RNVC: 2
60224: RNCC: 5 | RNVC: 2

13 Aug 1987

3460-01-260-7354
Boring Head

012607354
8200-5: RNCC: 3 | RNVC: 2

4 Aug 1987

3460-01-260-7106
Abrasive Wheel

012607106
426-03-400-0006: RNCC: 3 | RNVC: 2

4 Aug 1987

3460-01-259-6062
Lathe Center

012596062
015883: RNCC: 3 | RNVC: 2

19 Jul 1987

3460-01-258-6311
Hold Down Machine Clamp

012586311
CL-4-SWHA-4: RNCC: 3 | RNVC: 2

5 Jul 1987

3460-01-252-1083
Lapping Machine Holder

012521083
LAS-14378: RNCC: 3 | RNVC: 2
LAS-14378: RNCC: C | RNVC: 1

29 Mar 1987

3460-01-252-1225
Machine Collet

012521225
10111806-101: RNCC: 3 | RNVC: 2

29 Mar 1987

3460-01-251-9446
Cutting Tool Holder

012519446
AR-8-KD120: RNCC: 3 | RNVC: 2
AR-8: RNCC: 5 | RNVC: 9
AR-8-KD120: RNCC: 5 | RNVC: 9

26 Mar 1987

3460-01-251-9445
Cutting Tool Holder

012519445
BR-12-K68: RNCC: 3 | RNVC: 2
BR-12-K68: RNCC: 5 | RNVC: 9

26 Mar 1987

3460-01-251-8177
Bushing Mandrel

012518177
T-27268: RNCC: 3 | RNVC: 9
T-27268: RNCC: 5 | RNVC: 9

24 Mar 1987

3460-01-251-0588
Hold Down Machine Clamp

012510588
U102-00001: RNCC: 3 | RNVC: 9

11 Mar 1987

3460-01-250-8201
Lapping Plate

012508201
2238A4: RNCC: 3 | RNVC: 2
LP-243604: RNCC: 5 | RNVC: 9

7 Mar 1987

3460-00-872-1306
Solid Machine Mandrel

008721306
Y-2469-351 6-7/8: RNCC: 3 | RNVC: 9
Y2469-351-67-8: RNCC: 5 | RNVC: 9

1 Jan 1960

3460-01-246-0883
Machine Collet

012460883
149D1329PC10: RNCC: 3 | RNVC: 1

9 Dec 1986

3460-01-244-4857
Lathe Dog

012444857
EJ-31067: RNCC: 3 | RNVC: 2

14 Nov 1986

3460-01-244-0331
Inspection Mandrel

012440331
117 589 03 23 00: RNCC: 3 | RNVC: 2

6 Nov 1986

3460-01-243-8417
Abrasive Wheel

012438417
856A5527G01: RNCC: 3 | RNVC: 2

1 Nov 1986

3460-01-243-3569
Lathe Center Spike

012433569
24-413: RNCC: 3 | RNVC: 2

24 Oct 1986

3460-01-243-2302
Solid Machine Mandrel

012432302
406 589 041500: RNCC: 3 | RNVC: 2
406 589 041500: RNCC: 5 | RNVC: 2
406 589 041500: RNCC: 5 | RNVC: 9

23 Oct 1986

3460-01-243-1870
Abrasive Wheel

012431870
S2C6 3/8IN. DIAX2IN. LG: RNCC: 3 | RNVC: 2

23 Oct 1986

3460-01-243-0329
Grinding Machine Tool Set

012430329
856A5525G01: RNCC: 3 | RNVC: 2

21 Oct 1986

3460-01-243-0222
Abrasive Wheel

012430222
856A5528G01: RNCC: 3 | RNVC: 2

21 Oct 1986

3460-01-242-8209
Abrasive Wheel

012428209
856A5520G01: RNCC: 3 | RNVC: 2

17 Oct 1986

3460-01-241-4344
Collet Tool Extensi

012414344
VE1000: RNCC: 3 | RNVC: 9
VE1000: RNCC: 5 | RNVC: 2

25 Sep 1986

3460-01-240-6681
Lathe Center

012406681
24-412: RNCC: 3 | RNVC: 2

16 Sep 1986

3460-01-240-2361
Lathe Center

012402361
24-411: RNCC: 3 | RNVC: 2

11 Sep 1986

3460-01-238-3286
Abrasive Wheel

012383286
5X599: RNCC: 3 | RNVC: 2
44613A436: RNCC: 5 | RNVC: 9

13 Aug 1986

3460-01-237-7495
Boring Tool Bar

012377495
VNCD-7461: RNCC: 3 | RNVC: 9

5 Aug 1986

3460-01-236-9395
Honing Wedge

012369395
2H-R28: RNCC: 3 | RNVC: 9

24 Jul 1986

3460-01-236-0375
Indexing Fixture Plate

012360375
10559707: RNCC: 3 | RNVC: 9
10559707: RNCC: 5 | RNVC: 9

10 Jul 1986

3460-01-235-7430
Angle Shear Blade

012357430
722A: RNCC: 3 | RNVC: 2

4 Jul 1986

3460-01-234-1027
Chuck

012341027
2745642: RNCC: 3 | RNVC: 2

7 Jun 1986

3460-01-234-0197
Boring Head

012340197
UPA1-K9380: RNCC: 3 | RNVC: 2

6 Jun 1986

3460-01-234-0195
Boring Head

012340195
UPA5-S6-DS60: RNCC: 3 | RNVC: 2

6 Jun 1986

3460-00-838-5671
Grind Power Turbine Cover

008385671
PWC-30237: RNCC: 3 | RNVC: 2
PWC30237: RNCC: 5 | RNVC: 2
CPWA30237: RNCC: 5 | RNVC: 9
CPWA30237: RNCC: 5 | RNVC: 9

12 Dec 1966

3460-01-232-7508
Collet Sleeve

012327508
5338236: RNCC: 3 | RNVC: 2

20 May 1986

3460-01-231-7798
Solid Machine Mandrel

012317798
SCOTCH BRITE 936: RNCC: 3 | RNVC: 2
SCOTCH BRITE 936: RNCC: 3 | RNVC: 9

3 May 1986

3460-01-231-2037
Collet Chuck

012312037
SS100-DA108556: RNCC: 3 | RNVC: 2
SS100DA-108556: RNCC: 5 | RNVC: 9

24 Apr 1986

3460-01-230-4373
Abrasive Wheel

012304373
A16S6B: RNCC: 2 | RNVC: 1
GGG-W-290: RNCC: 4 | RNVC: 1

12 Apr 1986

3460-01-227-8641
Countersink Pilot

012278641
TF1M25.0036-044: RNCC: 3 | RNVC: 9

11 Mar 1986

3460-01-226-9706
Wheel Grinding Forming Tool

012269706
PW4: RNCC: 3 | RNVC: 2

26 Feb 1986

3460-01-226-5831
Machine Collet

012265831
5043: RNCC: 3 | RNVC: 2

20 Feb 1986

3460-01-225-4410
Abrasive Wheel

012254410
54284: RNCC: 3 | RNVC: 9
ST90-ALO-16 2X3/16X1/4: RNCC: 5 | RNVC: 9

2 Feb 1986

3460-01-224-4204
Leveling Pad

012244204
45501: RNCC: 3 | RNVC: 2

16 Jan 1986

3460-01-223-9945
Spring Arbor

012239945
9922.0001: RNCC: 3 | RNVC: 2
OSH-8-37: RNCC: 3 | RNVC: 9
OSH-8-37B: RNCC: 5 | RNVC: 2

11 Jan 1986

3460-01-223-8512
Abrasive Wheel

012238512
A80R6RR 1-1/2X3/16X1/4: RNCC: 3 | RNVC: 2

8 Jan 1986

3460-01-223-6121
Boring Head

012236121
057-2: RNCC: 3 | RNVC: 2

3 Jan 1986

3460-01-221-8324
Machine Collet Chucking Holding Fixture

012218324
100-49006: RNCC: 3 | RNVC: 2

4 Dec 1985

3460-01-219-2243
Machine Collet

012192243
31169-1: RNCC: 3 | RNVC: 2

23 Oct 1985

3460-01-218-0784
Lapping Block

012180784
5V7048: RNCC: 3 | RNVC: 2

6 Oct 1985

3460-01-217-7905
Automatic Feed Facing Head

012177905
221-1440: RNCC: 3 | RNVC: 9

3 Oct 1985

3460-01-216-9255
Insulation Tool

012169255
249-10: RNCC: 3 | RNVC: 9

19 Sep 1985

3460-01-216-7925
Abrasive Wheel

012167925
10-4127-010: RNCC: 3 | RNVC: 2

17 Sep 1985

3460-01-216-7924
Abrasive Wheel

012167924
B74.2 A120KB 8X2-1/2X5/8: RNCC: 3 | RNVC: 1
B74.13: RNCC: 5 | RNVC: 1
B7.1: RNCC: 5 | RNVC: 1
20650 NY-8: RNCC: 5 | RNVC: 9

17 Sep 1985

3460-01-216-7097
Abrasive Wheel

012167097
PA8-Q08B: RNCC: 3 | RNVC: 2

15 Sep 1985

3460-01-216-3075
Quick Change Chuck Adapter

012163075
3C3262P07: RNCC: 3 | RNVC: 2

7 Sep 1985

3460-01-216-0609
Abrasive Sheet Element Arbor

012160609
3C3262P28: RNCC: 3 | RNVC: 2

6 Sep 1985

3460-01-215-6843
Machining Holding Fixture

012156843
3C3262P04: RNCC: 3 | RNVC: 2

29 Aug 1985

3460-01-215-0544
Independent Chuck

012150544
043 120: RNCC: 3 | RNVC: 2
102-0109-08: RNCC: 3 | RNVC: 9

21 Aug 1985

3460-01-215-0542
Independent Chuck

012150542
043 118: RNCC: 3 | RNVC: 2
102-0109-06: RNCC: 3 | RNVC: 9

21 Aug 1985

3460-01-215-0543
Arc Chuck

012150543
043 119: RNCC: 3 | RNVC: 2
102-0109-07: RNCC: 3 | RNVC: 9

21 Aug 1985

3460-01-215-0541
Independent Chuck

012150541
043 117: RNCC: 3 | RNVC: 2
102-0109-05: RNCC: 3 | RNVC: 9

21 Aug 1985

3460-01-215-0540
Arc Chuck

012150540
043 116: RNCC: 3 | RNVC: 2
102-0109-04: RNCC: 3 | RNVC: 9

21 Aug 1985

3460-01-215-0537
Independent Chuck

012150537
043 059: RNCC: 3 | RNVC: 2
102-0103-57: RNCC: 3 | RNVC: 9

21 Aug 1985

3460-01-215-0536
Independent Chuck

012150536
043 058: RNCC: 3 | RNVC: 2
102-0103-56: RNCC: 3 | RNVC: 9

21 Aug 1985

3460-01-215-0534
Arc Chuck

012150534
102-0103-58: RNCC: 3 | RNVC: 2
102-0103-58: RNCC: 3 | RNVC: 9

21 Aug 1985

3460-01-215-0538
Independent Chuck

012150538
043 114: RNCC: 3 | RNVC: 2
102-0109-02: RNCC: 3 | RNVC: 9

21 Aug 1985

3460-01-215-0539
Arc Chuck

012150539
043 115: RNCC: 3 | RNVC: 2
102-0109-03: RNCC: 3 | RNVC: 9

21 Aug 1985

3460-01-215-0535
Independent Chuck

012150535
043 057: RNCC: 3 | RNVC: 2
102-0103-55: RNCC: 3 | RNVC: 9

21 Aug 1985

3460-01-215-0530
Independent Chuck

012150530
043 053: RNCC: 3 | RNVC: 2
102-0103-51: RNCC: 3 | RNVC: 9

21 Aug 1985

3460-01-215-0533
Independent Chuck

012150533
102-0103-54: RNCC: 3 | RNVC: 2
043056: RNCC: 3 | RNVC: 9
043-056: RNCC: 5 | RNVC: 2
102-0103-54: RNCC: 5 | RNVC: 9

21 Aug 1985

3460-01-215-0532
Arc Chuck

012150532
043 055: RNCC: 3 | RNVC: 2
102-0103-53: RNCC: 3 | RNVC: 9

21 Aug 1985

3460-01-215-0531
Independent Chuck

012150531
043 054: RNCC: 3 | RNVC: 2
102-0103-52: RNCC: 3 | RNVC: 9

21 Aug 1985

3460-01-215-0529
Independent Chuck

012150529
043 352: RNCC: 3 | RNVC: 2
102-0103-50: RNCC: 3 | RNVC: 9

21 Aug 1985

3460-01-215-0528
Independent Chuck

012150528
043 048: RNCC: 3 | RNVC: 2
102-0103-07: RNCC: 3 | RNVC: 9

21 Aug 1985

3460-01-215-0527
Independent Chuck

012150527
043 047: RNCC: 3 | RNVC: 2
102-0103-06: RNCC: 3 | RNVC: 9

21 Aug 1985

3460-01-215-0521
Independent Chuck

012150521
102-0103-01: RNCC: 3 | RNVC: 2
102-0103-01: RNCC: 3 | RNVC: 9
033-792: RNCC: 5 | RNVC: 2

21 Aug 1985

3460-01-215-0526
Independent Chuck

012150526
020-161: RNCC: 3 | RNVC: 2
020-161: RNCC: 3 | RNVC: 9
ERIC 102-0103-05: RNCC: 5 | RNVC: 2
102-0103-05: RNCC: 5 | RNVC: 9

21 Aug 1985

3460-01-215-0523
Independent Chuck

012150523
ERIC 102-0103-03: RNCC: 3 | RNVC: 2
022-863: RNCC: 3 | RNVC: 9
022-863: RNCC: 5 | RNVC: 2
102-0103-03: RNCC: 5 | RNVC: 9

21 Aug 1985

3460-01-215-0525
Arc Chuck

012150525
043-049: RNCC: 3 | RNVC: 2
ERIC 102-0103-08: RNCC: 5 | RNVC: 2
102-0103-08: RNCC: 5 | RNVC: 9

21 Aug 1985

3460-01-215-0524
Independent Chuck

012150524
018-929: RNCC: 3 | RNVC: 2
018929: RNCC: 3 | RNVC: 9
ERIC 102-0103-04: RNCC: 5 | RNVC: 2
102-0103-04: RNCC: 5 | RNVC: 9

21 Aug 1985

3460-01-215-0520
Independent Chuck

012150520
043 051: RNCC: 3 | RNVC: 2
102-0103-09: RNCC: 3 | RNVC: 9

21 Aug 1985

3460-01-215-0519
Arc Chuck

012150519
043 013: RNCC: 3 | RNVC: 2
102-0101-09: RNCC: 3 | RNVC: 9

21 Aug 1985

3460-01-215-0522
Independent Chuck

012150522
022-862: RNCC: 3 | RNVC: 2
022-862: RNCC: 3 | RNVC: 9
ERIC 102-0103-02: RNCC: 5 | RNVC: 2
102-0103-02: RNCC: 5 | RNVC: 9

21 Aug 1985

3460-01-215-0514
Arc Chuck

012150514
015-511: RNCC: 3 | RNVC: 2
102-0101-19: RNCC: 3 | RNVC: 9

21 Aug 1985

3460-01-215-0507
Arc Chuck

012150507
015-525: RNCC: 3 | RNVC: 2
102-0101-02: RNCC: 3 | RNVC: 9

21 Aug 1985

3460-01-215-0510
Independent Chuck

012150510
015-529: RNCC: 3 | RNVC: 2
102-0101-12: RNCC: 3 | RNVC: 9
ERIC 102-0101-12: RNCC: 5 | RNVC: 2

21 Aug 1985

3460-01-215-0518
Arc Chuck

012150518
036 625: RNCC: 3 | RNVC: 2
102-0101-08: RNCC: 3 | RNVC: 9

21 Aug 1985

3460-01-215-0517
Arc Chuck

012150517
015-538: RNCC: 3 | RNVC: 2
102-0101-06: RNCC: 3 | RNVC: 9

21 Aug 1985

3460-01-215-0513
Arc Chuck

012150513
102-0101-20: RNCC: 3 | RNVC: 9

21 Aug 1985

3460-01-215-0516
Arc Chuck

012150516
015-514: RNCC: 3 | RNVC: 2
102-0101-14: RNCC: 3 | RNVC: 9

21 Aug 1985

3460-01-215-0515
Arc Chuck

012150515
015-512: RNCC: 3 | RNVC: 2
102-0101-13: RNCC: 3 | RNVC: 9

21 Aug 1985

3460-01-215-0511
Arc Chuck

012150511
015-530: RNCC: 3 | RNVC: 2
102-0101-05: RNCC: 5 | RNVC: 9
102-0101-05: RNCC: 5 | RNVC: 9

21 Aug 1985

3460-01-215-0509
Arc Chuck

012150509
015-528: RNCC: 3 | RNVC: 2
015-028: RNCC: 5 | RNVC: 9
102-0101-04: RNCC: 5 | RNVC: 9
015-528: RNCC: 5 | RNVC: 9

21 Aug 1985

3460-01-215-0512
Arc Chuck

012150512
015-515: RNCC: 3 | RNVC: 9
ERIC 102-0101-01: RNCC: 5 | RNVC: 2
102-0101-01: RNCC: 5 | RNVC: 9

21 Aug 1985

3460-01-213-5722
Machine Tool Attachment Grinding Machine

012135722
57-031: RNCC: 3 | RNVC: 2
8476: RNCC: 5 | RNVC: 9

27 Jul 1985

3460-01-213-4975
Lapping Plate

012134975
LP-182406: RNCC: 3 | RNVC: 9
607-149713: RNCC: 5 | RNVC: 2
7916927: RNCC: 7 | RNVC: 1

26 Jul 1985

3460-01-213-2915
Drill Chuck Key

012132915
739: RNCC: 3 | RNVC: 2

25 Jul 1985

3460-01-213-2876
Abrasive Wheel

012132876
RA46-JV8: RNCC: 3 | RNVC: 2
RA46-H-V8-5X1-3/4X1-1/4: RNCC: 3 | RNVC: 9

25 Jul 1985

3460-01-213-1755
Drill Chuck

012131755
A-A-51140 CL1 STC SZ3: RNCC: 2 | RNVC: 2
DP-603: RNCC: 5 | RNVC: 1
GGG-C-350: RNCC: 5 | RNVC: 9

24 Jul 1985

3460-01-212-4169
Machine Collet

012124169
2305644: RNCC: 3 | RNVC: 2
2305644: RNCC: 5 | RNVC: 9

11 Jul 1985

3460-01-212-1179
Expansion Mandrel Sleeve

012121179
926B826: RNCC: 3 | RNVC: 9
921E394ITEM12: RNCC: 5 | RNVC: 9

6 Jul 1985

3460-01-211-6500
Cutter Pilot

012116500
10531: RNCC: 3 | RNVC: 2

28 Jun 1985

3460-01-211-6501
Cutter Pilot

012116501
10533: RNCC: 3 | RNVC: 2

28 Jun 1985

3460-01-211-6499
Cutter Pilot

012116499
10527: RNCC: 3 | RNVC: 2

28 Jun 1985

3460-01-210-7031
Drill Chuck

012107031
D-1000: RNCC: 3 | RNVC: 9

16 Jun 1985

3460-01-210-4406
Machine Table Vise

012104406
DP50: RNCC: 3 | RNVC: 2

12 Jun 1985

3460-01-210-4315
Babbitting Mandrel

012104315
215187-122: RNCC: 3 | RNVC: 2
215187-122: RNCC: 3 | RNVC: 9

12 Jun 1985

3460-01-210-1937
Drill Screw Chuck

012101937
DCL14: RNCC: 3 | RNVC: 9
16001: RNCC: 5 | RNVC: 9

7 Jun 1985

3460-01-209-8384
Chuck Cone

012098384
14320: RNCC: 3 | RNVC: 9

4 Jun 1985

3460-01-208-9674
Machine Collet Chucking Holding Fixture

012089674
505-2249: RNCC: 3 | RNVC: 2
550-007: RNCC: 5 | RNVC: 9

21 May 1985

3460-01-208-4845
Dirt Deflector

012084845
2-100885-01: RNCC: 3 | RNVC: 9

15 May 1985

3460-01-208-4496
Positioning Table

012084496
PC-12M: RNCC: 3 | RNVC: 9
PC-12M: RNCC: 5 | RNVC: 9

14 May 1985

3460-01-207-8079
Abrasive Wheel

012078079
B74.2: RNCC: 3 | RNVC: 1
RA80JV-8: RNCC: 3 | RNVC: 2
B7.1: RNCC: 5 | RNVC: 1
B74.13: RNCC: 5 | RNVC: 1

5 May 1985

3460-01-207-3211
Bench Centers

012073211
18-5C: RNCC: 3 | RNVC: 9

30 Apr 1985

3460-01-206-9098
Nut Arbor

012069098
R-TBD-3029: RNCC: 3 | RNVC: 2
T-428257: RNCC: 5 | RNVC: 2

24 Apr 1985

3460-01-206-5684
Grinder Mount

012065684
925J401P1: RNCC: 3 | RNVC: 1
909A357-34: RNCC: 5 | RNVC: 1

19 Apr 1985

3460-01-206-1351
Chuck Assy

012061351
430058-01: RNCC: 3 | RNVC: 2

15 Apr 1985

3460-01-205-0322
Boring Tool Bar

012050322
HSS-750D: RNCC: 3 | RNVC: 9

4 Apr 1985

3460-01-204-8925
Abrasive Wheel

012048925
B74.2: RNCC: 3 | RNVC: 1
A46-KB: RNCC: 3 | RNVC: 2
B7.1: RNCC: 5 | RNVC: 1
B74.13: RNCC: 5 | RNVC: 1

31 Mar 1985

3460-01-203-7822
Starter Pilot

012037822
11022: RNCC: 3 | RNVC: 2

20 Mar 1985

3460-01-203-7823
Piercer Pilot

012037823
11033: RNCC: 3 | RNVC: 2

20 Mar 1985

3460-01-203-7824
Starter Pilot

012037824
11031: RNCC: 3 | RNVC: 2

20 Mar 1985

3460-01-203-2761
Arbor Assembly

012032761
11016: RNCC: 3 | RNVC: 2

13 Mar 1985

3460-01-203-2757
Pilot

012032757
10532: RNCC: 3 | RNVC: 2

13 Mar 1985

3460-01-203-2726
Starter Pilot

012032726
11032: RNCC: 3 | RNVC: 2

13 Mar 1985

3460-01-203-2725
Piercer Pilot

012032725
11023: RNCC: 3 | RNVC: 2

13 Mar 1985

3460-01-197-3976
Lapping Plate

011973976
UD-9674: RNCC: 3 | RNVC: 2

21 Dec 1984

3460-01-197-3878
Abrasive Wheel

011973878
1G-78: RNCC: 3 | RNVC: 9

21 Dec 1984

3460-01-197-0404
Abrasive Wheel

011970404
MS210: RNCC: 3 | RNVC: 2
MS210: RNCC: 3 | RNVC: 9
47484: RNCC: 5 | RNVC: 2
47484: RNCC: 5 | RNVC: 9

18 Dec 1984

3460-01-196-7573
Portable Metalworking Machinery Coolant Unit

011967573
D-153 120V: RNCC: 3 | RNVC: 2

14 Dec 1984

3460-01-192-2870
Milling-Grinding-Drilling-Slotting Attachment

011922870
VSTR66: RNCC: 3 | RNVC: 2

19 Oct 1984

3460-01-192-0336
Milling Cutter Arbor

011920336
126: RNCC: 3 | RNVC: 2
126: RNCC: 3 | RNVC: 9

16 Oct 1984

3460-01-192-0311
Stopper Gib

011920311
173: RNCC: 3 | RNVC: 2
173: RNCC: 3 | RNVC: 9

16 Oct 1984

3460-01-192-0309
Arbor Chuck

011920309
76B: RNCC: 3 | RNVC: 2
76B: RNCC: 3 | RNVC: 9

16 Oct 1984

3460-01-192-0310
Stopper Gib

011920310
172: RNCC: 3 | RNVC: 2
172: RNCC: 3 | RNVC: 9

16 Oct 1984

3460-01-192-0308
Arbor Chuck

011920308
76: RNCC: 3 | RNVC: 2
76: RNCC: 3 | RNVC: 9

16 Oct 1984

3460-01-191-9666
Arbor Chuck

011919666
77: RNCC: 3 | RNVC: 2
77: RNCC: 3 | RNVC: 9

15 Oct 1984

3460-01-190-1400
Lathe Dog

011901400
63012: RNCC: 3 | RNVC: 2

24 Sep 1984

3460-01-189-9890
Tooling Ball

011899890
ADB-26705: RNCC: 3 | RNVC: 2

21 Sep 1984

3460-01-189-5729
Abrasive Wheel

011895729
MS221: RNCC: 3 | RNVC: 2
MS221: RNCC: 3 | RNVC: 9
47495: RNCC: 5 | RNVC: 2
47495: RNCC: 5 | RNVC: 9

17 Sep 1984

3460-01-189-5678
Mandrel

011895678
MS212: RNCC: 3 | RNVC: 2
MS212: RNCC: 3 | RNVC: 9
47486: RNCC: 5 | RNVC: 2
47486: RNCC: 5 | RNVC: 9

17 Sep 1984

3460-01-189-4916
Abrasive Wheel

011894916
SA60J86W14X1X5IN.ARBOR HOLE: RNCC: 3 | RNVC: 2
B74.2 14X1X5: RNCC: 5 | RNVC: 1
B74.13: RNCC: 5 | RNVC: 1

16 Sep 1984

3460-01-188-5045
Drill Chuck

011885045
MODEL 7: RNCC: 3 | RNVC: 2

5 Sep 1984

3460-01-186-3714
Solid Machine Mandrel

011863714
TD761D-60: RNCC: 3 | RNVC: 2
TD761D-60: RNCC: 5 | RNVC: 2
TD761D-60: RNCC: 5 | RNVC: 2
TD761D-60: RNCC: 5 | RNVC: 2

10 Aug 1984

3460-01-185-5036
Collet Holder

011855036
A510B: RNCC: 3 | RNVC: 9

30 Jul 1984

3460-01-185-5035
Collet Holder

011855035
A59B: RNCC: 3 | RNVC: 9

30 Jul 1984

3460-01-185-1803
Crankpin End Mandrel

011851803
ST-1197: RNCC: 3 | RNVC: 2

26 Jul 1984

3460-01-183-2446
Burner Chuck

011832446
5480-038-04: RNCC: 3 | RNVC: 2

4 Jul 1984

3460-01-183-1322
Lathe Center

011831322
565.030: RNCC: 3 | RNVC: 2

2 Jul 1984

3460-01-183-1323
Drill Chuck

011831323
565.000: RNCC: 3 | RNVC: 2

2 Jul 1984

3460-01-183-1163
Four Jaw Chuck

011831163
565.081: RNCC: 3 | RNVC: 2

2 Jul 1984

3460-01-183-1158
Arbor

011831158
565.050: RNCC: 3 | RNVC: 2

2 Jul 1984

3460-01-181-8734
Abrasive Wheel

011818734
W179-66A60N2V: RNCC: 3 | RNVC: 9

16 Jun 1984

3460-01-180-3696
Abrasive Wheel

011803696
W236A80-GGX 1-1/2X1/2X1: RNCC: 3 | RNVC: 9
B74.13 A80-GGX: RNCC: 5 | RNVC: 1
B74.2 W236 1.5X0.5X0.25X1.5: RNCC: 5 | RNVC: 1

27 May 1984

3460-01-180-1647
Indexing Fixture Plate

011801647
722-8401-3: RNCC: 3 | RNVC: 2

25 May 1984

3460-01-180-0116
Abrasive Wheel

011800116
B74.2 B-123 0.187: RNCC: 3 | RNVC: 1
B74.13: RNCC: 5 | RNVC: 1
GA-80-R-V40: RNCC: 5 | RNVC: 9

23 May 1984

3460-01-178-4694
Collet Chuck

011784694
124-002: RNCC: 3 | RNVC: 2

5 May 1984

3460-01-177-5494
Shaft And Gea Arbor

011775494
121762-02: RNCC: 3 | RNVC: 9

26 Apr 1984

3460-01-173-9594
Abrasive Wheel

011739594
B74.2 B124 D1: RNCC: 3 | RNVC: 1
AA80-R-V40 1/8X1/8 TY B124D1: RNCC: 3 | RNVC: 2
B74.13: RNCC: 5 | RNVC: 1

13 Mar 1984

3460-01-173-6990
Machine Collet

011736990
37431-1: RNCC: 3 | RNVC: 9

7 Mar 1984

3460-01-170-8043
Disk Mandrel

011708043
S3S13009000: RNCC: 3 | RNVC: 2

29 Jan 1984

3460-01-170-3481
Abrasive Wheel

011703481
37C60-OVM: RNCC: 3 | RNVC: 2

24 Jan 1984

3460-01-168-2258
Collet Holder

011682258
A57B: RNCC: 3 | RNVC: 9

14 Dec 1983

3460-01-167-7578
Arbor Adapter

011677578
3-A-5/8: RNCC: 3 | RNVC: 2

5 Dec 1983

3460-01-167-2968
Machine Collet

011672968
142D6982: RNCC: 3 | RNVC: 2

24 Nov 1983

3460-01-166-7739
Drill Chuck

011667739
9GT2975: RNCC: 3 | RNVC: 2
2-617514-01: RNCC: 5 | RNVC: 9

16 Nov 1983

3460-01-165-5036
Abrasive Wheel

011655036
B74.2 A80KR 4X1/4X1/4: RNCC: 3 | RNVC: 1
A80C2R955 4X1/4X1/4: RNCC: 3 | RNVC: 2
A80C2R955 4X1/4X1/4: RNCC: 3 | RNVC: 2
B7.1: RNCC: 5 | RNVC: 1
B74.13: RNCC: 5 | RNVC: 1

29 Oct 1983

3460-01-165-5035
Abrasive Wheel

011655035
B74.2: RNCC: 3 | RNVC: 1
A120D2RR: RNCC: 3 | RNVC: 2
B7.1: RNCC: 5 | RNVC: 1
B74.13: RNCC: 5 | RNVC: 1

29 Oct 1983

3460-01-161-6741
Abrasive Wheel

011616741
B74.2: RNCC: 3 | RNVC: 1
T8B1239A9006V72: RNCC: 3 | RNVC: 2
B7.1: RNCC: 5 | RNVC: 1
B74.13: RNCC: 5 | RNVC: 1

8 Sep 1983

3460-01-161-6504
Combination Bar Parting

011616504
104: RNCC: 3 | RNVC: 9

8 Sep 1983

3460-01-150-4040
Abrasive Wheel

011504040
A70-R8-B1: RNCC: 3 | RNVC: 1

4 Apr 1983

3460-01-150-4038
Abrasive Wheel

011504038
A54GFX: RNCC: 3 | RNVC: 1

4 Apr 1983

3460-01-149-4797
Abrasive Wheel

011494797
B74.2 TY1: RNCC: 3 | RNVC: 1
662-528-36664: RNCC: 3 | RNVC: 2
B7.1: RNCC: 5 | RNVC: 1
B74.13: RNCC: 5 | RNVC: 1
K5-659-270: RNCC: 5 | RNVC: 9

21 Mar 1983

3460-01-148-7957
Honing Machine Mandrel

011487957
K20-713AH: RNCC: 3 | RNVC: 2

11 Mar 1983

3460-01-147-2745
Cam Guide Collet

011472745
499895: RNCC: 3 | RNVC: 2

15 Feb 1983

3460-01-147-2746
Cam Guide Collet

011472746
499894: RNCC: 3 | RNVC: 2

15 Feb 1983

3460-01-147-1832
Indexing Fixture Plate

011471832
B13958: RNCC: 3 | RNVC: 2

11 Feb 1983

3460-01-143-5731
Portable Metalworking Machinery Coolant Unit

011435731
N-U-21: RNCC: 3 | RNVC: 2

6 Dec 1982

3460-01-142-9119
Tang-Driver

011429119
185D025-050C: RNCC: 3 | RNVC: 2

22 Nov 1982

3460-01-142-3279
Abrasive Wheel

011423279
MDTAB: RNCC: 3 | RNVC: 9

14 Nov 1982

3460-01-142-2340
Chuck Jaws Set

011422340
11738: RNCC: 3 | RNVC: 2

14 Nov 1982

3460-01-141-4500
Independent Jaw Chuck

011414500
CA4812: RNCC: 3 | RNVC: 2

29 Oct 1982

3460-01-140-5700
Counterbore Pilot

011405700
P-53A: RNCC: 3 | RNVC: 2
P-53A: RNCC: 5 | RNVC: 9

14 Oct 1982

3460-01-140-2002
Taper-Lok Cutter Depth Stop

011402002
110M012-030B: RNCC: 3 | RNVC: 2

8 Oct 1982

3460-01-140-0261
Counterbore Pilot

011400261
P-51B: RNCC: 3 | RNVC: 2
P-51B: RNCC: 5 | RNVC: 9

7 Oct 1982

3460-01-140-0260
Counterbore Pilot

011400260
P-54: RNCC: 3 | RNVC: 2
P-54: RNCC: 5 | RNVC: 9

7 Oct 1982

3460-01-139-4950
Counterbore Pilot

011394950
P-47: RNCC: 3 | RNVC: 2
P-47: RNCC: 5 | RNVC: 9

3 Oct 1982

3460-01-139-4951
Counterbore Pilot

011394951
P-41: RNCC: 3 | RNVC: 2
P-41: RNCC: 5 | RNVC: 9

3 Oct 1982

3460-01-139-4949
Counterbore Pilot

011394949
P-50A: RNCC: 3 | RNVC: 2
P-50A: RNCC: 5 | RNVC: 9

3 Oct 1982

3460-01-139-4953
Counterbore Pilot

011394953
P-13A: RNCC: 3 | RNVC: 2
P-13A: RNCC: 5 | RNVC: 9

3 Oct 1982

3460-01-139-4945
Counterbore Pilot

011394945
P-48: RNCC: 3 | RNVC: 2
P-48: RNCC: 5 | RNVC: 9

3 Oct 1982

3460-01-139-4948
Counterbore Pilot

011394948
P-50B: RNCC: 3 | RNVC: 2
P-50B: RNCC: 5 | RNVC: 9

3 Oct 1982

3460-01-139-4947
Counterbore Pilot

011394947
P-53: RNCC: 3 | RNVC: 2
P-53: RNCC: 5 | RNVC: 9

3 Oct 1982

3460-01-139-4946
Counterbore Pilot

011394946
P-45: RNCC: 3 | RNVC: 2
P-45: RNCC: 5 | RNVC: 9

3 Oct 1982

3460-01-139-4143
Counterbore Holder

011394143
H-101: RNCC: 3 | RNVC: 2
H-101: RNCC: 5 | RNVC: 9

30 Sep 1982

3460-01-139-4141
Counterbore Pilot

011394141
P-15A: RNCC: 3 | RNVC: 2
P-15A: RNCC: 5 | RNVC: 9

30 Sep 1982

3460-01-139-4138
Counterbore Pilot

011394138
P-19A: RNCC: 3 | RNVC: 2
P-19A: RNCC: 5 | RNVC: 9

30 Sep 1982

3460-01-139-4139
Counterbore Pilot

011394139
P-19: RNCC: 3 | RNVC: 2
P-19: RNCC: 5 | RNVC: 9

30 Sep 1982

3460-01-139-4137
Counterbore Pilot

011394137
P-22A: RNCC: 3 | RNVC: 2
P-22A: RNCC: 5 | RNVC: 9

30 Sep 1982

3460-01-139-4136
Counterbore Pilot

011394136
P-25: RNCC: 3 | RNVC: 2
P-25: RNCC: 5 | RNVC: 9

30 Sep 1982

3460-01-139-4134
Counterbore Pilot

011394134
P-36: RNCC: 3 | RNVC: 2
P-36: RNCC: 5 | RNVC: 9

30 Sep 1982

3460-01-139-4133
Counterbore Pilot

011394133
P-44A: RNCC: 3 | RNVC: 2
P-44A: RNCC: 5 | RNVC: 9

30 Sep 1982

3460-01-139-4045
Arbor Assembly

011394045
503232: RNCC: 3 | RNVC: 9

30 Sep 1982

3460-01-138-0047
Eyepiece Assembly Index

011380047
SP31609: RNCC: 3 | RNVC: 2

5 Sep 1982

3460-01-136-9511
Counterbore Pilot

011369511
P-79: RNCC: 3 | RNVC: 2
P-79: RNCC: 5 | RNVC: 9

17 Aug 1982

3460-01-136-9510
Counterbore Pilot

011369510
P-62: RNCC: 3 | RNVC: 2
P-62: RNCC: 5 | RNVC: 9

17 Aug 1982

3460-01-136-9083
Abrasive Wheel

011369083
B74.2 TY1 8X1/2X1-1/4: RNCC: 3 | RNVC: 1
A100V4CD TY 1 8X1/2X1-1/4: RNCC: 3 | RNVC: 2
B7.1: RNCC: 5 | RNVC: 1
A100V4CD: RNCC: 5 | RNVC: 1
B74.13 A-100-V-4-B: RNCC: 5 | RNVC: 2

17 Aug 1982

3460-01-136-3112
Counterbore Pilot

011363112
P-103: RNCC: 3 | RNVC: 2
P-103: RNCC: 5 | RNVC: 9

6 Aug 1982

3460-01-136-1518
Counterbore Pilot

011361518
P-78: RNCC: 3 | RNVC: 2
P-78: RNCC: 5 | RNVC: 9

4 Aug 1982

3460-01-136-1516
Counterbore Pilot

011361516
P-76: RNCC: 3 | RNVC: 2
P-76: RNCC: 5 | RNVC: 9

4 Aug 1982

3460-01-136-1517
Counterbore Pilot

011361517
P-81: RNCC: 3 | RNVC: 2
P-81: RNCC: 5 | RNVC: 9

4 Aug 1982

3460-01-136-1505
Counterbore Pilot

011361505
P-69A: RNCC: 3 | RNVC: 2
P-69A: RNCC: 5 | RNVC: 9

4 Aug 1982

3460-01-136-1509
Counterbore Pilot

011361509
P-62A: RNCC: 3 | RNVC: 2
P-62A: RNCC: 5 | RNVC: 9

4 Aug 1982

3460-01-136-1514
Counterbore Pilot

011361514
P-85: RNCC: 3 | RNVC: 2
P-85: RNCC: 5 | RNVC: 9

4 Aug 1982

3460-01-136-1513
Counterbore Pilot

011361513
P-97: RNCC: 3 | RNVC: 2
P-97: RNCC: 5 | RNVC: 9

4 Aug 1982

3460-01-136-1515
Counterbore Pilot

011361515
P-82: RNCC: 3 | RNVC: 2
P-82: RNCC: 5 | RNVC: 9

4 Aug 1982

3460-01-136-1511
Counterbore Pilot

011361511
P-58: RNCC: 3 | RNVC: 2
P-58: RNCC: 5 | RNVC: 9

4 Aug 1982

3460-01-136-1512
Counterbore Pilot

011361512
P-54A: RNCC: 3 | RNVC: 2
P-54A: RNCC: 5 | RNVC: 9

4 Aug 1982

3460-01-136-1506
Counterbore Pilot

011361506
P-69: RNCC: 3 | RNVC: 2
P-69: RNCC: 5 | RNVC: 9

4 Aug 1982

3460-01-136-1510
Counterbore Pilot

011361510
P-58A: RNCC: 3 | RNVC: 2
P-58A: RNCC: 5 | RNVC: 9

4 Aug 1982

3460-01-136-1507
Counterbore Pilot

011361507
P-66A: RNCC: 3 | RNVC: 2
P-66A: RNCC: 5 | RNVC: 9

4 Aug 1982

3460-01-136-1508
Counterbore Pilot

011361508
P-66: RNCC: 3 | RNVC: 2
P-66: RNCC: 5 | RNVC: 9

4 Aug 1982

3460-01-136-1504
Counterbore Pilot

011361504
P-72: RNCC: 3 | RNVC: 2
P-72: RNCC: 5 | RNVC: 9

4 Aug 1982

3460-01-134-6720
Spring Mandrel

011346720
0N222092: RNCC: 3 | RNVC: 2

8 Jul 1982

3460-01-130-0911
Counterbore Pilot

011300911
GRTCBRHS308-250: RNCC: 3 | RNVC: 2

15 Apr 1982

3460-01-128-9627
Abrasive Wheel Set

011289627
J-4627-02: RNCC: 3 | RNVC: 2

29 Mar 1982

3460-01-127-1278
Indexing Block

011271278
11507961: RNCC: 3 | RNVC: 2

24 Feb 1982

3460-01-126-9161
Abrasive Wheel

011269161
B74.2 A60JV 4X1/2X3/4: RNCC: 3 | RNVC: 1
32A60-J5VBE-4/ME 19226-3/4: RNCC: 3 | RNVC: 2
B74.13: RNCC: 5 | RNVC: 1
32A60-J5VBE-4: RNCC: 5 | RNVC: 1
B7.1: RNCC: 5 | RNVC: 1

19 Feb 1982

3460-01-126-7402
Cable Chuck

011267402
94330-S3-8: RNCC: 3 | RNVC: 2
592-4759149: RNCC: 5 | RNVC: 2

16 Feb 1982

3460-01-126-7164
Drill Press Vise

011267164
VISD-250: RNCC: 3 | RNVC: 2
32B200: RNCC: 5 | RNVC: 9
AA32B200: RNCC: 5 | RNVC: 9
328200: RNCC: 5 | RNVC: 9

16 Feb 1982

3460-01-126-5028
Dresser Body

011265028
558-0001: RNCC: 3 | RNVC: 2

12 Feb 1982

3460-01-124-5288
Abrasive Wheel

011245288
A60KSVBE/TY5 14X1-1/2X5: RNCC: 3 | RNVC: 2
A60KSVBE: RNCC: 5 | RNVC: 1

6 Jan 1982

3460-01-122-9564
Tooling Block

011229564
NCB243624: RNCC: 3 | RNVC: 9

3 Dec 1981

3460-01-122-6755
Tooling Block

011226755
BT092209: RNCC: 3 | RNVC: 9
NCB9229: RNCC: 5 | RNVC: 9

26 Nov 1981

3460-01-121-3719
Tooling Block

011213719
BT-122412: RNCC: 3 | RNVC: 9
NCB122412: RNCC: 5 | RNVC: 9

5 Nov 1981

3460-01-121-3330
Universal Jaw Chuck

011213330
BC1: RNCC: 3 | RNVC: 2

5 Nov 1981

3460-01-120-4598
Countersink Pilot

011204598
GT915074-10E-8: RNCC: 3 | RNVC: 2

18 Oct 1981

3460-01-119-5561
Countersink Holder

011195561
PWA55388: RNCC: 3 | RNVC: 2

25 Sep 1981

3460-01-117-0841
Collet Chuck

011170841
AJL 3-8X 24 1-4IN: RNCC: 3 | RNVC: 2
6467: RNCC: 5 | RNVC: 2
S-066271: RNCC: 5 | RNVC: 9
S-066271: RNCC: 5 | RNVC: 9

8 Aug 1981

3460-01-116-9729
Blade Arbor

011169729
115658093: RNCC: 3 | RNVC: 2

7 Aug 1981

3460-01-116-9728
Blade Arbor

011169728
115658072: RNCC: 3 | RNVC: 2

7 Aug 1981

3460-01-115-0947
Hold Down Pad

011150947
17108: RNCC: 3 | RNVC: 2
CP-505: RNCC: 5 | RNVC: 9

27 Jun 1981

3460-01-113-1459
Bench Centers

011131459
763-18-1: RNCC: 3 | RNVC: 2

16 May 1981

3460-01-112-1090
Countersink Pilot

011121090
UDB9CS192PGJFN: RNCC: 3 | RNVC: 2
11173: RNCC: 5 | RNVC: 2
GT9CS192PGJFN: RNCC: 5 | RNVC: 2

26 Apr 1981

3460-01-107-8320
Counterbore Pilot

011078320
GRTCBRHS249-187: RNCC: 3 | RNVC: 2

13 Feb 1981

3460-01-107-7883
Countersink Pilot

011077883
ZT154-22: RNCC: 3 | RNVC: 2

13 Feb 1981

3460-01-107-2414
Reverse Counterbore Pilot

011072414
GRTCBRHS191-156: RNCC: 3 | RNVC: 2

1 Feb 1981

3460-00-540-1986
Solid Machine Mandrel

005401986
X812: RNCC: 3 | RNVC: 2

1 Jan 1961

3460-01-105-5639
Counterbore Pilot

011055639
GRTCBHS374-187: RNCC: 3 | RNVC: 2
GRTCBRHS374-187AGE: RNCC: 5 | RNVC: 9
GRTCBHS374-187AG: RNCC: 5 | RNVC: 9

27 Dec 1980

3460-01-105-5595
Counterbore Pilot

011055595
GRTCBRHS309-312: RNCC: 3 | RNVC: 2
GRTCBRH5309-312: RNCC: 5 | RNVC: 9

25 Dec 1980

3460-01-105-5596
Counterbore Pilot

011055596
GRTCBRHS246-187: RNCC: 3 | RNVC: 2

25 Dec 1980

3460-01-105-5594
Counterbore Pilot

011055594
GRTCBRHS472-250: RNCC: 3 | RNVC: 2

25 Dec 1980

3460-01-105-0396
Counterbore Pilot

011050396
GRTCBRHS241-187: RNCC: 3 | RNVC: 2

15 Dec 1980

3460-01-104-2689
Hold Down Machine Clamp

011042689
47927: RNCC: 3 | RNVC: 2
47927: RNCC: 5 | RNVC: 9

2 Dec 1980

3460-01-102-9102
Boring Tool Bar

011029102
20-DVUNR3: RNCC: 3 | RNVC: 9
S20-DVUNR3: RNCC: 5 | RNVC: 9
A20DVUNR3: RNCC: 5 | RNVC: 9
S20-DVUNR3: RNCC: 5 | RNVC: 9
B-34-10: RNCC: 5 | RNVC: 9

30 Oct 1980

3460-01-102-8132
Boring Tool Bar

011028132
BS-250-G: RNCC: 3 | RNVC: 2
AS-250-G: RNCC: 5 | RNVC: 9
S7B-250A: RNCC: 5 | RNVC: 9
84-421: RNCC: 5 | RNVC: 9
SBT-250-A: RNCC: 5 | RNVC: 9

28 Oct 1980

3460-01-102-7832
Abrasive Mandrel Stone

011027832
L20-A57: RNCC: 3 | RNVC: 2

26 Oct 1980

3460-01-102-2796
Abrasive Wheel

011022796
B74.2 TY1 A46JV 4X1/2X3/4: RNCC: 3 | RNVC: 1
RA46-J-V8 4 X 1/2 X 3/4: RNCC: 3 | RNVC: 2
B7.1: RNCC: 5 | RNVC: 1
B74.13: RNCC: 5 | RNVC: 1
EA46JV8 4 X 1/2 X 3/4: RNCC: 5 | RNVC: 9

17 Oct 1980

3460-00-528-2397
Abrasive Wheel

005282397
A-4605-V2: RNCC: 3 | RNVC: 1
MIL-W-17929: RNCC: 4 | RNVC: 1

1 Jan 1963

3460-01-101-3952
Abrasive Wheel

011013952
2-012-6615-9: RNCC: 3 | RNVC: 2
GC80H11VR: RNCC: 5 | RNVC: 1
ANSI B74.2 TYPE 6X1/2X1 1/4: RNCC: 5 | RNVC: 2
2-012-6615-9: RNCC: 5 | RNVC: 9
B74.2 TY1: RNCC: 5 | RNVC: 9
GC80H11VR: RNCC: 5 | RNVC: 9
B7.1: RNCC: 5 | RNVC: 9
B74.13: RNCC: 5 | RNVC: 9

28 Sep 1980

3460-01-101-3482
Abrasive Wheel

011013482
A36RBFCW 1/2X1/16X1/8: RNCC: 3 | RNVC: 2
A36RBFCW: RNCC: 5 | RNVC: 9

27 Sep 1980

3460-01-099-8415
Abrasive Wheel

010998415
B74.2 TY 1 A60GV 10X1X3: RNCC: 3 | RNVC: 1
23A60-I8VBE: RNCC: 3 | RNVC: 2
A60-G8V52 10X1X3: RNCC: 3 | RNVC: 2
B74.13: RNCC: 5 | RNVC: 1
B7.1: RNCC: 5 | RNVC: 1

24 Aug 1980

3460-01-099-2813
Drill Chuck Arbor

010992813
890-9534: RNCC: 3 | RNVC: 9
40354: RNCC: 5 | RNVC: 9

15 Aug 1980

3460-01-098-6648
Boring Tool Bar

010986648
S12-NELR05: RNCC: 3 | RNVC: 2
S12-NELR05: RNCC: 5 | RNVC: 9
B-8206: RNCC: 5 | RNVC: 9

6 Aug 1980

3460-01-098-3864
Abrasive Wheel

010983864
2-263-5030-8: RNCC: 3 | RNVC: 2
B74.13: RNCC: 5 | RNVC: 1
A36RB5RW: RNCC: 5 | RNVC: 1
B74.2 TY1A36RB 16X1/8X1: RNCC: 5 | RNVC: 2

31 Jul 1980

3460-01-087-0580
Plate

010870580
13047794: RNCC: 3 | RNVC: 2

11 Dec 1979

3460-01-084-9430
Drill Bit Extension

010849430
770-B 9IN: RNCC: 3 | RNVC: 9

26 Oct 1979

3460-01-084-3694
Countersink Pilot

010843694
UDB9312PGJFNFC: RNCC: 3 | RNVC: 2
GT9312PGJFNFC: RNCC: 5 | RNVC: 2

17 Oct 1979

3460-01-082-9106
Milling-Grinding-Drilling-Slotting Attachment

010829106
39501: RNCC: 3 | RNVC: 2

13 Sep 1979

3460-01-079-4198
Wheel Dressing Diamond Nib

010794198
19D7527: RNCC: 3 | RNVC: 9

5 Jul 1979

3460-01-079-0022
Machine Collet

010790022
11776827: RNCC: 3 | RNVC: 2
60093-040: RNCC: 5 | RNVC: 2

24 Jun 1979

3460-01-076-6652
Tube Bending Mandrel

010766652
C3912-12-1: RNCC: 3 | RNVC: 2
11-16-12-20-3: RNCC: 5 | RNVC: 9

9 May 1979

3460-01-075-2684
Tube Bending Mandrel

010752684
701-0-567: RNCC: 3 | RNVC: 9
C3912-16-3: RNCC: 5 | RNVC: 2
11-22-16-58-1: RNCC: 5 | RNVC: 9

17 Apr 1979

3460-01-075-2680
Tube Bending Mandrel

010752680
C3912-5-1: RNCC: 3 | RNVC: 2
11-3-5-16-1: RNCC: 5 | RNVC: 9

17 Apr 1979

3460-01-075-2677
Tube Bending Mandrel

010752677
701-0-514: RNCC: 3 | RNVC: 2
701-0-514: RNCC: 5 | RNVC: 9
11-2-4-20-1: RNCC: 5 | RNVC: 9
701-0-514: RNCC: 5 | RNVC: 9
C3912-4-2: RNCC: 7 | RNVC: 2

17 Apr 1979

3460-01-075-2678
Tube Bending Mandrel

010752678
C3912-10-1: RNCC: 3 | RNVC: 2
11-13-10-20-3: RNCC: 5 | RNVC: 9

17 Apr 1979

3460-01-071-5399
Tool Holder

010715399
5-548564: RNCC: 3 | RNVC: 9

9 Feb 1979

3460-01-070-9226
Step Clamp

010709226
CL-46-STC: RNCC: 3 | RNVC: 2

24 Jan 1979

3460-01-070-9225
Step Clamp

010709225
CL-44-STC: RNCC: 3 | RNVC: 2
12105: RNCC: 5 | RNVC: 2

24 Jan 1979

3460-01-067-1566
Abrasive Wheel

010671566
B74.2 TY1 A60PV 3X1X1/2: RNCC: 3 | RNVC: 1
A60M8VBE 3X1X1/2: RNCC: 3 | RNVC: 2
B74.13: RNCC: 5 | RNVC: 1
B7.1: RNCC: 5 | RNVC: 1
731-204764: RNCC: 5 | RNVC: 2
MIL-W-17929: RNCC: 5 | RNVC: 9
13-06501: RNCC: 5 | RNVC: 9
3X1X1/2A60P8V9TY1SHA: RNCC: 5 | RNVC: 9

25 Oct 1978

3460-01-065-7000
Boring Bar Clamp

010657000
NC-2: RNCC: 3 | RNVC: 9

22 Sep 1978

3460-01-064-1871
Drill Chuck

010641871
C-094339: RNCC: 3 | RNVC: 9
2368: RNCC: 5 | RNVC: 2
C-94339Y: RNCC: 5 | RNVC: 9

18 Aug 1978

3460-01-063-0182
Machine Collet

010630182
100-TG-0234: RNCC: 3 | RNVC: 2
2-17-015-100: RNCC: 5 | RNVC: 9
100-TG-0234: RNCC: 5 | RNVC: 9

25 Jul 1978

3460-01-062-3531
Boring Bar Head

010623531
1480L: RNCC: 3 | RNVC: 2
1480L: RNCC: 5 | RNVC: 9

15 Jul 1978

3460-01-061-7728
Boring Tool Bar

010617728
VNCD-7460: RNCC: 3 | RNVC: 9

29 Jun 1978

3460-01-061-7727
Boring Tool Bar

010617727
BHP-NV-120: RNCC: 3 | RNVC: 9

29 Jun 1978

3460-01-061-2386
Mandrel Assembly

010612386
T5201547-104-105: RNCC: 3 | RNVC: 2
T5201547-104-105: RNCC: 3 | RNVC: 9

15 Jun 1978

3460-01-060-6798
Abrasive Wheel

010606798
B74.2TY1 C24RRF 20X1/8X1: RNCC: 3 | RNVC: 2
B7.1: RNCC: 5 | RNVC: 1
B74.13: RNCC: 5 | RNVC: 1
MIL-W-16102: RNCC: 5 | RNVC: 9
RC202: RNCC: 5 | RNVC: 9

26 May 1978

3460-01-058-5134
Grind Arbor Assembly

010585134
6763652: RNCC: 3 | RNVC: 2

28 Mar 1978

3460-01-057-7814
Shaft Mandrel

010577814
550-0026: RNCC: 3 | RNVC: 2

19 Mar 1978

3460-01-055-9647
Boring Tool Bar

010559647
CBT-500BRT: RNCC: 3 | RNVC: 2

14 Feb 1978

3460-01-055-9646
Boring Tool Bar

010559646
10718: RNCC: 3 | RNVC: 9
40718: RNCC: 5 | RNVC: 9
SBT-625C BORING TOOL: RNCC: 5 | RNVC: 9

14 Feb 1978

3460-01-053-5456
Milling Machine Spindle End Adapter

010535456
80446: RNCC: 3 | RNVC: 2

6 Jan 1978

3460-01-053-5103
Abrasive Wheel

010535103
B74.2 A60JV 2X1X3/8: RNCC: 3 | RNVC: 1
9A60J5V72K: RNCC: 3 | RNVC: 2
B7.1: RNCC: 5 | RNVC: 1
B74.13: RNCC: 5 | RNVC: 1
2X1X3/8A60J5VTY5SHA: RNCC: 5 | RNVC: 9
MIL-W-17929: RNCC: 5 | RNVC: 9

5 Jan 1978

3460-01-053-5104
Abrasive Wheel

010535104
B74.2: RNCC: 3 | RNVC: 1
B74.13: RNCC: 5 | RNVC: 1
MIL-W-17929: RNCC: 5 | RNVC: 9
12X1-1/2X5A80K8VTY1SHA: RNCC: 5 | RNVC: 9

5 Jan 1978

3460-01-053-0050
Boring Tool Bar

010530050
83-430: RNCC: 3 | RNVC: 9
83-430: RNCC: 5 | RNVC: 2
09-X: RNCC: 5 | RNVC: 9
83-505: RNCC: 5 | RNVC: 9
83-430: RNCC: 5 | RNVC: 9

23 Dec 1977

3460-01-052-0754
Abrasive Wheel

010520754
B74.2: RNCC: 3 | RNVC: 1
19A46-L8VBE: RNCC: 3 | RNVC: 2
B74.13: RNCC: 5 | RNVC: 1
8X1X5/8A46L8VTY1SHA: RNCC: 5 | RNVC: 9
MIL-W-17929: RNCC: 5 | RNVC: 9

10 Dec 1977

3460-01-051-8677
Lathe Center

010518677
CE3904: RNCC: 3 | RNVC: 2

5 Dec 1977

3460-01-051-8656
Abrasive Wheel

010518656
32A60O7VBE: RNCC: 3 | RNVC: 2
B74.13: RNCC: 5 | RNVC: 1
B74.2: RNCC: 5 | RNVC: 2
MIL-W-17929: RNCC: 5 | RNVC: 9
8X1X1-1/4A60O7VTY1SHA: RNCC: 5 | RNVC: 9

5 Dec 1977

3460-01-051-7554
Cylinder Hone Stone And Holder

010517554
K20-J95: RNCC: 3 | RNVC: 2

5 Dec 1977

3460-01-051-7430
Yoke Adapter

010517430
AN-97: RNCC: 3 | RNVC: 2

5 Dec 1977

3460-01-051-2604
Milling Cutter Arbor

010512604
7300: RNCC: 3 | RNVC: 2
A0102: RNCC: 5 | RNVC: 9

25 Nov 1977

3460-01-051-2526
Abrasive Wheel

010512526
W236 3/8X2-1/2A60OV: RNCC: 2 | RNVC: 2
ANSI B7.1: RNCC: 5 | RNVC: 1
ANSI B74.13: RNCC: 5 | RNVC: 1
ANSI B74.2: RNCC: 5 | RNVC: 1
9A60O5V72K: RNCC: 5 | RNVC: 1
MIL-W-17663: RNCC: 5 | RNVC: 9

25 Nov 1977

3460-01-050-7667
Die Set

010507667
0606-B1: RNCC: 3 | RNVC: 2
0606-E1: RNCC: 5 | RNVC: 9

13 Nov 1977

3460-01-050-5962
Boring Tool Bar

010505962
375-1012: RNCC: 3 | RNVC: 9
801/C6: RNCC: 5 | RNVC: 9

10 Nov 1977

3460-01-050-5079
Abrasive Wheel

010505079
B74.2 A70JB 6X1/16X1-1/4: RNCC: 3 | RNVC: 1
B7.1: RNCC: 5 | RNVC: 1
B74.13: RNCC: 5 | RNVC: 1
A70-J-B5SW 6X1/16X1-1/4: RNCC: 5 | RNVC: 9

8 Nov 1977

3460-01-050-4800
Cutting Tool Holder

010504800
CTGPL102B: RNCC: 3 | RNVC: 2
KTGL-102C: RNCC: 5 | RNVC: 9
KTGL-102C: RNCC: 5 | RNVC: 9

8 Nov 1977

3460-01-050-4416
Abrasive Wheel

010504416
B74.2: RNCC: 3 | RNVC: 1
A100M6-V22 8X1X5/8: RNCC: 3 | RNVC: 2
B74.13: RNCC: 5 | RNVC: 1
8X1X5/8 A100M6-V22TY1: RNCC: 5 | RNVC: 9
MIL-W-17929: RNCC: 5 | RNVC: 9

7 Nov 1977

3460-01-050-4414
Abrasive Wheel

010504414
B74.2 C100IV 4X3/8X1/2: RNCC: 3 | RNVC: 1
37C100-IVK 4X3/8X1/2: RNCC: 3 | RNVC: 2
B7.1: RNCC: 5 | RNVC: 1
B74.13: RNCC: 5 | RNVC: 1

7 Nov 1977

3460-01-049-9535
Cutting Tool Holder

010499535
DVJNR-853D: RNCC: 3 | RNVC: 2
DVJNR853D: RNCC: 5 | RNVC: 9

30 Oct 1977

3460-01-049-2844
Abrasive Wheel

010492844
B74.2: RNCC: 3 | RNVC: 1
8A60J5V22-7 7X2X1-1/4: RNCC: 3 | RNVC: 2
B74.13: RNCC: 5 | RNVC: 1
7X2X1-1/4A60I5VTY11SHC: RNCC: 5 | RNVC: 9
8A60I5V22-7: RNCC: 5 | RNVC: 9
7X2X1-1/4A60J5VTY11SHC: RNCC: 5 | RNVC: 9
MIL-W-17929: RNCC: 5 | RNVC: 9

15 Oct 1977

3460-01-049-1068
Machine Tool Attachment Grinding Machine

010491068
2470262-1: RNCC: 3 | RNVC: 2
2470262-1: RNCC: 3 | RNVC: 9

11 Oct 1977

3460-01-049-0110
Abrasive Wheel

010490110
B74.2: RNCC: 3 | RNVC: 1
7X1 1/4X1/2SA60J5V6: RNCC: 3 | RNVC: 2
B74.13: RNCC: 5 | RNVC: 1
MIL-W-17929: RNCC: 5 | RNVC: 9
7X1-1/4X1/2A60J5VTY1: RNCC: 5 | RNVC: 9

9 Oct 1977

3460-01-048-7588
Abrasive Wheel

010487588
256-XF: RNCC: 3 | RNVC: 2
252: RNCC: 5 | RNVC: 9
180NS106 2-1/2X3/8X1/4: RNCC: 5 | RNVC: 9

3 Oct 1977

3460-01-048-6902
Boring Tool Bar

010486902
CBT-1000ES: RNCC: 3 | RNVC: 2

2 Oct 1977

3460-01-048-4363
Abrasive Wheel

010484363
B74.2: RNCC: 3 | RNVC: 1
SD100-N100B1/8: RNCC: 3 | RNVC: 2
B74.13: RNCC: 5 | RNVC: 1
SD80M75R1/8: RNCC: E | RNVC: 8

25 Sep 1977

3460-01-048-4366
Abrasive Wheel

010484366
B74.2: RNCC: 3 | RNVC: 1
17A60J8VS2KS: RNCC: 3 | RNVC: 2
B7.1: RNCC: 5 | RNVC: 1
B74.13: RNCC: 5 | RNVC: 1
4X1/2X3/4A60J8VTY1SHA: RNCC: 5 | RNVC: 9
MIL-W-17929: RNCC: 5 | RNVC: 9

25 Sep 1977

3460-01-048-2736
Abrasive Wheel

010482736
B74.2: RNCC: 3 | RNVC: 1
32A60H8VBE: RNCC: 3 | RNVC: 2
B7.1: RNCC: 5 | RNVC: 1
B74.13: RNCC: 5 | RNVC: 1
2X1-1/4X3/8A60H8VTY5SHA: RNCC: 5 | RNVC: 9
MIL-W-17929: RNCC: 5 | RNVC: 9

22 Sep 1977

3460-01-048-2725
Abrasive Wheel

010482725
B74.2 TY 1 A100KV 2-1/2X3/8X3/8: RNCC: 3 | RNVC: 1
TY1 2-1/2X3/8X3/8 23A100K6VBE: RNCC: 3 | RNVC: 2
B7.1: RNCC: 5 | RNVC: 1
B74.13: RNCC: 5 | RNVC: 1
2-1/2X3/8X3/8A100K6VTY1SHA: RNCC: 5 | RNVC: 9
MIL-W-17929: RNCC: 5 | RNVC: 9

22 Sep 1977

3460-01-048-2735
Abrasive Wheel

010482735
B74.2 A80RR 1-1/2X3/16X1/4: RNCC: 3 | RNVC: 1
A80R6R: RNCC: 3 | RNVC: 2
B74.13: RNCC: 5 | RNVC: 1
B7.1: RNCC: 5 | RNVC: 1
1-1/2X3/16X1/4A80R6RTY1SHA: RNCC: 5 | RNVC: 9
MIL-W-17929: RNCC: 5 | RNVC: 9

22 Sep 1977

3460-01-048-2727
Abrasive Wheel

010482727
B74.3 D150N100B1/8: RNCC: 3 | RNVC: 1
1A1 6X1/2X1-1/4 D150-N100-B-1/8: RNCC: 3 | RNVC: 2
SD150-R100B99-1/8 TY1A1: RNCC: 5 | RNVC: 1
B74.13: RNCC: 5 | RNVC: 1
TY1A1 6X1/2X1-1/4D150N100B6-1/8: RNCC: 5 | RNVC: 9

22 Sep 1977

3460-01-048-2730
Abrasive Wheel

010482730
B74.2: RNCC: 3 | RNVC: 1
A46H8V22: RNCC: 3 | RNVC: 2
B7.1: RNCC: 5 | RNVC: 1
B74.13: RNCC: 5 | RNVC: 1
4X1-1/2X1-1/4A46H8V: RNCC: 5 | RNVC: 9
MIL-W-17929: RNCC: 5 | RNVC: 9
A46J8V22 4X1 1/4X1/2X3: RNCC: E | RNVC: 8
B74.2 A46JV 4X1-1/2X1-1/4: RNCC: E | RNVC: 8
4X1 1/4X1/2X3 A46J8V22: RNCC: E | RNVC: 8
MIL-W-17929 TY 11: RNCC: E | RNVC: 8

22 Sep 1977

3460-01-048-2731
Abrasive Wheel

010482731
B74.2 A60JV 4X2X7/8: RNCC: 3 | RNVC: 1
9A60J5V22 4X2X7/8: RNCC: 3 | RNVC: 2
B7.1: RNCC: 5 | RNVC: 1
B74.13: RNCC: 5 | RNVC: 1
4X2X7/8X1-1/2X1/2X1-1/4A60J5VTY5: RNCC: 5 | RNVC: 9
MIL-W-17929: RNCC: 5 | RNVC: 9

22 Sep 1977

3460-01-048-2720
Abrasive Wheel

010482720
B74.2: RNCC: 3 | RNVC: 1
39C120-I8VK: RNCC: 3 | RNVC: 2
B7.1: RNCC: 5 | RNVC: 1
B74.13: RNCC: 5 | RNVC: 1
GC120H12VN: RNCC: 5 | RNVC: 9
MIL-W-17929: RNCC: 5 | RNVC: 9
6X3/4X1 1/4C120H12VTY1SHA: RNCC: 5 | RNVC: 9

22 Sep 1977

3460-01-047-8981
Abrasive Wheel

010478981
B74.2 TY11 A60J5V 4X2X7/8: RNCC: 3 | RNVC: 2
B7.1: RNCC: 5 | RNVC: 1
B74.13: RNCC: 5 | RNVC: 1
7A60J5V40 4X2X7/8: RNCC: 5 | RNVC: 2
MIL-W-17929: RNCC: 5 | RNVC: 9
4X2X7/8X1 1/2X1/2X1 3/4A60J5VTY5: RNCC: 5 | RNVC: 9

15 Sep 1977

3460-01-047-8537
Honing Unit Guide Shoe

010478537
WE-D: RNCC: 3 | RNVC: 2

14 Sep 1977

3460-01-047-8513
Abrasive Wheel

010478513
B74.2 A60RB 2X1/8X1/4: RNCC: 3 | RNVC: 1
B74.13: RNCC: 5 | RNVC: 1
A60 RR: RNCC: 5 | RNVC: 9

14 Sep 1977

3460-01-047-4217
Drill Holder

010474217
CA5: RNCC: 3 | RNVC: 2

7 Sep 1977

3460-01-047-4142
Tapered Thread Mandrel

010474142
CA-10: RNCC: 3 | RNVC: 2
A-10CARTRIDGE ROLL: RNCC: 5 | RNVC: 2
A-10: RNCC: 5 | RNVC: 9

7 Sep 1977

3460-01-047-1809
Wheel Dressing Diamond Nib

010471809
NI21R4: RNCC: 3 | RNVC: 9
NI21R4: RNCC: 5 | RNVC: 2

1 Sep 1977

3460-01-047-1682
Abrasive Wheel

010471682
SCOTCH-BRITE6X1X1 5AMEDIUM: RNCC: 3 | RNVC: 2
SCOTCH-BRITE6X1X1 5AMEDIUM: RNCC: 3 | RNVC: 9
SCOTCH-BRITE6X1X1 5AMEDIUM: RNCC: 5 | RNVC: 9

1 Sep 1977

3460-01-047-0016
Wheel Dressing Diamond Nib

010470016
1A6C7: RNCC: 3 | RNVC: 9
1A6C7: RNCC: 5 | RNVC: 2

27 Aug 1977

3460-01-047-0013
Machine Attachment Abrasive Wheel Dresser

010470013
80030: RNCC: 3 | RNVC: 2
WD-1: RNCC: 5 | RNVC: 9

27 Aug 1977

3460-01-046-3660
Boring Tool Bar

010463660
D16KTFPR3: RNCC: 3 | RNVC: 2
B-5008: RNCC: 5 | RNVC: 9
D16KTFPR3: RNCC: 5 | RNVC: 9

15 Aug 1977

3460-01-046-2813
Cutting Tool Holder

010462813
729-240218: RNCC: 3 | RNVC: 2

15 Aug 1977

3460-01-046-1341
Rubber Expanding Drum

010461341
RUBBER EXPANDING DRUM 2 X 2: RNCC: 3 | RNVC: 9
08834196928: RNCC: 5 | RNVC: 9

13 Aug 1977

3460-01-046-0286
Honing Unit Guide Shoe

010460286
WC-B: RNCC: 3 | RNVC: 2

11 Aug 1977

3460-01-045-8976
Abrasive Wheel

010458976
B74.2: RNCC: 3 | RNVC: 1
B7.1: RNCC: 5 | RNVC: 1
B74.13: RNCC: 5 | RNVC: 1
1X1/4X1/4A80P8B1A: RNCC: 5 | RNVC: 9
MIL-W-17929: RNCC: 5 | RNVC: 9

9 Aug 1977

3460-01-045-8978
Abrasive Wheel

010458978
B74.2 A46M5V: RNCC: 3 | RNVC: 1
B74.13: RNCC: 5 | RNVC: 1
10X1-1/4X7/8A46M5V1A: RNCC: 5 | RNVC: 9
MIL-W-17929: RNCC: 5 | RNVC: 9

9 Aug 1977

3460-01-045-8980
Abrasive Wheel

010458980
B74.2: RNCC: 3 | RNVC: 1
37C80-JVK: RNCC: 3 | RNVC: 2
B74.13: RNCC: 5 | RNVC: 1
14X1X5C80J8V1A: RNCC: 5 | RNVC: 9
MIL-W-17929: RNCC: 5 | RNVC: 9

9 Aug 1977

3460-01-043-5091
Chuck Jaw

010435091
108902: RNCC: 3 | RNVC: 2
108902: RNCC: 5 | RNVC: 2
108902: RNCC: 5 | RNVC: 9

25 Jun 1977

3460-01-042-5986
Machine Collet

010425986
7808: RNCC: 3 | RNVC: 9
1014493: RNCC: 5 | RNVC: 9
99001: RNCC: 5 | RNVC: 9

14 Jun 1977

3460-00-420-5086
Step Plate

004205086
CG471-11: RNCC: 3 | RNVC: 2

7 Mar 1969

3460-01-029-1542
Housing Arbor

010291542
101D4827: RNCC: 3 | RNVC: 2

16 Oct 1976

3460-01-028-0978
Abrasive Wheel

010280978
PWA53346: RNCC: 3 | RNVC: 2

24 Sep 1976

3460-01-027-3300
Abrasive Wheel

010273300
A46-N-12V3: RNCC: 3 | RNVC: 1
ANSI B7.1: RNCC: 3 | RNVC: 1
ANSI B74.13: RNCC: 3 | RNVC: 1
ANSI B74.2: RNCC: 3 | RNVC: 1
MIL-W-17929: RNCC: 5 | RNVC: 9

16 Sep 1976

3460-01-026-1989
Cylinder Hone Stone And Holder

010261989
P28-J45: RNCC: 3 | RNVC: 2

19 Aug 1976

3460-01-025-5901
Shoe Guide

010255901
WB-B: RNCC: 3 | RNVC: 2

5 Aug 1976

3460-01-025-4062
Guide Shoe

010254062
WB-D: RNCC: 3 | RNVC: 2

31 Jul 1976

3460-01-024-0302
Tube Bending Mandrel

010240302
703-0-115: RNCC: 3 | RNVC: 9
11-4-8-26-3: RNCC: 5 | RNVC: 9

2 Jul 1976

3460-01-022-1447
Abrasive Wheel

010221447
21001: RNCC: 3 | RNVC: 9
K-061: RNCC: 5 | RNVC: 9

25 May 1976

3460-01-020-2714
Wheel Dressing Diamond Nib

010202714
M104-05: RNCC: 3 | RNVC: 9
IDP-607-02: RNCC: 5 | RNVC: 2

27 Apr 1976

3460-01-019-0506
Abrasive Wheel

010190506
SR-R-M: RNCC: 3 | RNVC: 1
B74.2 C90BR 2X1/2X1/4: RNCC: 3 | RNVC: 1
208-M: RNCC: 3 | RNVC: 2
B7.2: RNCC: 5 | RNVC: 1
B74.13: RNCC: 5 | RNVC: 1

14 Apr 1976

3460-01-018-6212
Abrasive Wheel

010186212
A60-PB: RNCC: 3 | RNVC: 1
ANSI B7.1: RNCC: 3 | RNVC: 1
ANSI B74.13: RNCC: 3 | RNVC: 1
ANSI B74.2: RNCC: 3 | RNVC: 1

29 Mar 1976

3460-01-018-6211
Abrasive Wheel

010186211
B74.2 A60PB 6X1/32X1-1/4: RNCC: 3 | RNVC: 1
A60-PB/TY1 6X1-1/4X1/32: RNCC: 3 | RNVC: 2
B74.13: RNCC: 5 | RNVC: 1
B7.1: RNCC: 5 | RNVC: 1

29 Mar 1976

3460-00-254-3098
Solid Machine Mandrel

002543098
00M251: RNCC: 4 | RNVC: 1

1 Jan 1963

3460-00-254-3100
Solid Machine Mandrel

002543100
A-A-51129 TY I SIZE 29: RNCC: 2 | RNVC: 2
OO-M-251: RNCC: 5 | RNVC: 9

1 Jan 1963

3460-00-254-3088
Solid Machine Mandrel

002543088
A-A-51129 TY I SIZE 23: RNCC: 2 | RNVC: 2
OO-M-251: RNCC: 5 | RNVC: 9

1 Jan 1963

3460-00-254-3090
Solid Machine Mandrel

002543090
OO-M-251: RNCC: 4 | RNVC: 1

1 Jan 1963

3460-00-254-3064
Solid Machine Mandrel

002543064
00M251: RNCC: 4 | RNVC: 1

1 Jan 1963

3460-00-254-3050
Solid Machine Mandrel

002543050
OO-M-251: RNCC: 4 | RNVC: 1

1 Jan 1963

3460-00-254-3034
Solid Machine Mandrel

002543034
A-A-51129 TY I SIZE 4: RNCC: 2 | RNVC: 2
OO-M-251: RNCC: 5 | RNVC: 9

1 Jan 1963

3460-00-254-3032
Solid Machine Mandrel

002543032
A-A-51129 TY I SIZE 2: RNCC: 2 | RNVC: 2
OO-M-251: RNCC: 5 | RNVC: 9

1 Jan 1963

3460-00-161-6890
Lapping Plate

001616890
PWC30845: RNCC: 3 | RNVC: 2
PWC30845: RNCC: 5 | RNVC: 2
CPWA30845: RNCC: 5 | RNVC: 9
CPWA30845: RNCC: 5 | RNVC: 9

19 Aug 1972

3460-00-156-8702
Balancing Arbor

001568702
LTCT6722: RNCC: 3 | RNVC: 2

12 Jan 1970

3460-00-102-8547
Compressor Balancing Arbor

001028547
PWC30946: RNCC: 3 | RNVC: 2
PWC30446: RNCC: 5 | RNVC: 2
CPWA30446: RNCC: 5 | RNVC: 9
PWC30446: RNCC: 5 | RNVC: 9

3 Jun 1968

3460-01-017-7586
Machine Collet

010177586
2-12-032-100: RNCC: 3 | RNVC: 2
2-12-032-100: RNCC: 5 | RNVC: 9

12 Mar 1976

3460-01-017-4710
Standard Extra Equipment

010174710
SZ3: RNCC: 3 | RNVC: 2
SZ3: RNCC: 5 | RNVC: 9

9 Mar 1976

3460-01-016-1802
Routing Machine Bit Arbor

010161802
TA-160: RNCC: 3 | RNVC: 9

5 Feb 1976

3460-01-015-8425
Abrasive Wheel

010158425
B74.13 3-1/2X1/2X1/2: RNCC: 3 | RNVC: 1
B7.1: RNCC: 5 | RNVC: 1
B74.2: RNCC: 5 | RNVC: 1
MIL-W-17929: RNCC: 5 | RNVC: 9

29 Jan 1976

3460-01-015-8420
Abrasive Wheel

010158420
B74.2: RNCC: 3 | RNVC: 1
B7.1: RNCC: 5 | RNVC: 1
B74.13: RNCC: 5 | RNVC: 1
A11-A80-I-B/V: RNCC: 5 | RNVC: 9
MIL-W-17663: RNCC: 5 | RNVC: 9

29 Jan 1976

3460-01-015-3130
Disc Holder

010153130
540-2440: RNCC: 3 | RNVC: 2

17 Jan 1976

3460-01-014-7569
Countersink Pilot

010147569
AT435 7/16: RNCC: 3 | RNVC: 2
AT435 7/16: RNCC: 3 | RNVC: 9

5 Jan 1976

3460-01-014-7205
Lap Plate

010147205
PWA53324: RNCC: 3 | RNVC: 2

2 Jan 1976

3460-01-010-3772
Spring Arbor

010103772
2447461-1: RNCC: 3 | RNVC: 2
2447461-1: RNCC: 5 | RNVC: 9
2447461-1: RNCC: 5 | RNVC: 9

28 Sep 1975

3460-01-010-3578
Taper Shank Tool Socket

010103578
AA51188-12: RNCC: 2 | RNVC: 2
A-A-51188: RNCC: 4 | RNVC: 1
401-5003: RNCC: 5 | RNVC: 1

28 Sep 1975

3460-01-010-0599
Abrasive Wheel

010100599
B74.2: RNCC: 3 | RNVC: 1
38A150-L9VBE/TYI 7 X 1-1/4 X 1/4: RNCC: 3 | RNVC: 2
38A150-L9VBE: RNCC: 5 | RNVC: 1
B7.1: RNCC: 5 | RNVC: 1
B74.13: RNCC: 5 | RNVC: 1
MIL-W-17929: RNCC: 5 | RNVC: 9

22 Sep 1975

3460-01-010-0434
Arbor Press Table

010100434
3188856: RNCC: 3 | RNVC: 2

22 Sep 1975

3460-01-009-6116
Drill Chuck Arbor

010096116
14-H-2: RNCC: 3 | RNVC: 2
75007: RNCC: 5 | RNVC: 9

13 Sep 1975

3460-01-008-7207
Disc Holder

010087207
23103 TYPE P: RNCC: 3 | RNVC: 1
MASTER DISK HOLDER: RNCC: 5 | RNVC: 9

29 Aug 1975

3460-01-007-9766
Abrasive Wheel

010079766
B74.2: RNCC: 3 | RNVC: 1
A54-K5VBE/TY1 14 X 5 X 1-1/2: RNCC: 3 | RNVC: 2
B74.13: RNCC: 5 | RNVC: 1
A54-K5VBE: RNCC: 5 | RNVC: 1
B7.1: RNCC: 5 | RNVC: 1
MIL-W-17929: RNCC: 5 | RNVC: 9
MA60-K-6V6 14 X1 1/2 X 5: RNCC: E | RNVC: 8
B74.1: RNCC: E | RNVC: 8
MA-60-K-6V6: RNCC: E | RNVC: 8
B74.2 A60K6V 14X1-1/2X5: RNCC: E | RNVC: 8

15 Aug 1975

3460-01-006-5778
Abrasive Wheel

010065778
B74.2: RNCC: 3 | RNVC: 1
GC60-H11-VR/TY5 3-1/2X7/8X1-1/2: RNCC: 3 | RNVC: 2
B7.1: RNCC: 5 | RNVC: 1
B74.13: RNCC: 5 | RNVC: 1
GC60-H11-VR: RNCC: 5 | RNVC: 1
37C60-H8V: RNCC: 5 | RNVC: 2
MIL-W-17929: RNCC: 5 | RNVC: 9

19 Jul 1975

3460-01-006-5779
Abrasive Wheel

010065779
B74.2 C120MR 3X1/4X1/4: RNCC: 3 | RNVC: 1
304F: RNCC: 3 | RNVC: 2
B7.1: RNCC: 5 | RNVC: 1
B74.13: RNCC: 5 | RNVC: 1

19 Jul 1975

3460-01-005-4770
Abrasive Wheel

010054770
B74.2 A70MR 2X1/2X1/4: RNCC: 3 | RNVC: 1
208-70AA2000: RNCC: 3 | RNVC: 2
B74.13: RNCC: 5 | RNVC: 1
B7.1: RNCC: 5 | RNVC: 1
TT-70-AL0-21: RNCC: 5 | RNVC: 9
54870: RNCC: 5 | RNVC: 9

24 Jun 1975

3460-01-003-7610
Abrasive Wheel

010037610
B74.3: RNCC: 3 | RNVC: 1
6954: RNCC: 3 | RNVC: 2
SD180-N100B56-1/8: RNCC: 3 | RNVC: 2
B7.1: RNCC: 5 | RNVC: 1
B74.13: RNCC: 5 | RNVC: 1

5 May 1975

3460-01-003-4771
Grinding Machine Machine Tool

010034771
35701: RNCC: 3 | RNVC: 2

25 Apr 1975

3460-01-003-1061
Abrasive Wheel

010031061
B74.2 A46HV 4X1-1/2X7/8: RNCC: 3 | RNVC: 1
A46-H8V/TY5 4 X 7/8 X 1-1/2: RNCC: 3 | RNVC: 2
B7.1: RNCC: 5 | RNVC: 1
B74.13: RNCC: 5 | RNVC: 1
A46-H8V: RNCC: 5 | RNVC: 1
MIL-W-17929: RNCC: 5 | RNVC: 9

8 Apr 1975

3460-01-003-1059
Abrasive Wheel

010031059
B74.2: RNCC: 3 | RNVC: 1
32A30-TVBEM: RNCC: 3 | RNVC: 1
B7.1: RNCC: 5 | RNVC: 1
B74.13: RNCC: 5 | RNVC: 1
MIL-W-17663: RNCC: 5 | RNVC: 9
A25-A30-T-V: RNCC: 5 | RNVC: 9

8 Apr 1975

3460-00-999-1257
Pin Mandrel

009991257
11600070-1: RNCC: 3 | RNVC: 2
ST-800-6: RNCC: 5 | RNVC: 9

2 Jan 1966

3460-00-999-1258
Pin Mandrel

009991258
ST-800-7: RNCC: 3 | RNVC: 2
11600070-2: RNCC: 5 | RNVC: 2

2 Jan 1966

3460-00-991-0624
V-Block

009910624
VS0303E06: RNCC: 3 | RNVC: 9
VB33B6: RNCC: 5 | RNVC: 9

30 Mar 1967

3460-00-987-0199
Collet

009870199
431622-1: RNCC: 3 | RNVC: 2

1 Jan 1963

3460-00-984-0915
Lapping Plate

009840915
6PT37503: RNCC: 3 | RNVC: 2

1 Jan 1962

3460-00-979-1680
Rotary Table

009791680
M1896: RNCC: 3 | RNVC: 9
3460-1141-2024: RNCC: 6 | RNVC: 9

1 Jan 1963

3460-00-977-7520
Locating Mandrel

009777520
6043-1-2-3: RNCC: 3 | RNVC: 9
ST738: RNCC: 5 | RNVC: 2

1 Jan 1962

3460-00-971-5395
Countersink Pilot

009715395
PR18: RNCC: 3 | RNVC: 2

1 Jan 1962

3460-00-971-5396
Countersink Pilot

009715396
PR17: RNCC: 3 | RNVC: 2

1 Jan 1962

3460-00-967-0006
Propeller Collet

009670006
3394-2: RNCC: 3 | RNVC: 2
9096824-6: RNCC: 5 | RNVC: 2
3394: RNCC: D | RNVC: 9
9096824: RNCC: D | RNVC: 9

1 Jan 1960

3460-00-957-7515
Jaw Key

009577515
HD1-A-4: RNCC: 3 | RNVC: 2

18 May 1966

3460-00-953-7939
Portable Metalworking Machinery Coolant Unit

009537939
M2: RNCC: 3 | RNVC: 2
M2: RNCC: 3 | RNVC: 9

13 May 1972

3460-00-950-7639
Counterbore Holder

009507639
HS201: RNCC: 3 | RNVC: 2
HS210: RNCC: 3 | RNVC: 2

1 Jan 1962

3460-00-949-3972
Hose Assembly Machine Mandrel

009493972
F2064-10A: RNCC: 3 | RNVC: 2

13 Apr 1966

3460-00-949-3971
Hose Assembly Mandrel

009493971
F2064-24A: RNCC: 3 | RNVC: 2

13 Apr 1966

3460-00-943-5188
Flyback Arbor

009435188
22300339: RNCC: 3 | RNVC: 9

28 Jan 1966

3460-00-943-4267
Abrasive Wheel

009434267
B74.2 A60M6V 10X1-1/4X1/4: RNCC: 3 | RNVC: 1
B7.1: RNCC: 5 | RNVC: 1
B74.13: RNCC: 5 | RNVC: 1
MIL-W-17929: RNCC: 5 | RNVC: 9

9 Jan 1966

3460-00-942-4422
Machine Table Vise

009424422
1102000: RNCC: 3 | RNVC: 2
52855A23: RNCC: 5 | RNVC: 2
5222A2: RNCC: 5 | RNVC: 9

23 Dec 1965

3460-00-936-5708
Straight Shank Tool Socket

009365708
SWE14448: RNCC: 3 | RNVC: 1
SWE14448SPCLN: RNCC: 5 | RNVC: 9
SWE-14448L: RNCC: D | RNVC: 9

10 Mar 1967

3460-00-936-5710
Straight Shank Tool Socket

009365710
SWE14446: RNCC: 3 | RNVC: 1
SWE-14446L: RNCC: D | RNVC: 9

10 Mar 1967

3460-00-932-3316
Counterbore Pilot

009323316
AT489A8: RNCC: 3 | RNVC: 9
AT489A8: RNCC: 5 | RNVC: 2

15 Feb 1967

3460-00-932-3309
Counterbore Pilot

009323309
AT489B3: RNCC: 3 | RNVC: 9
AT489B3: RNCC: 5 | RNVC: 2

15 Feb 1967

3460-00-923-4653
Lapping Block

009234653
G37964: RNCC: 3 | RNVC: 1

20 Jan 1966

3460-00-922-1024
Hold Down Machine Clamp

009221024
205SR: RNCC: 3 | RNVC: 9

13 May 1972

3460-00-916-6891
Hose Assembly Machine Mandrel

009166891
F2064-5A: RNCC: 3 | RNVC: 2

13 Jul 1966

3460-00-916-6892
Assembling Mandrel

009166892
F2064-32A: RNCC: 3 | RNVC: 2

13 Jul 1966

3460-00-913-3112
Abrasive Wheel

009133112
32A60J5VBE: RNCC: 3 | RNVC: 1
66252840962: RNCC: 3 | RNVC: 2
32A60J5VBE 5 X 1 3/4 X 1 1/4: RNCC: 5 | RNVC: 9

1 Jan 1960

3460-00-908-5095
Pilot

009085095
PWA21577: RNCC: 3 | RNVC: 2

1 Jan 1960

3460-00-904-2472
Shrinking And Stretching Jaws

009042472
HD1-B-3: RNCC: 3 | RNVC: 2

13 Jun 1966

3460-00-902-1363
Back Counters Pilot

009021363
AT404-2: RNCC: 3 | RNVC: 9
AT404-2: RNCC: 5 | RNVC: 2
AT404-2: RNCC: 5 | RNVC: 2

8 Feb 1967

3460-00-902-1391
Back Counters Pilot

009021391
AT404-5: RNCC: 3 | RNVC: 9
AT404-5: RNCC: 5 | RNVC: 1
AT404-5: RNCC: 5 | RNVC: 2

8 Feb 1967

3460-00-902-1374
Back Counters Pilot

009021374
AT404-4: RNCC: 3 | RNVC: 2
AT404-4: RNCC: 3 | RNVC: 9
AT404-4: RNCC: 5 | RNVC: 2
AT404-4: RNCC: 5 | RNVC: 2
AT404-4: RNCC: 5 | RNVC: 9
AT404-4: RNCC: 5 | RNVC: 9

8 Feb 1967

3460-00-902-1370
Back Counters Pilot

009021370
AT404-3: RNCC: 3 | RNVC: 2
AT404-3: RNCC: 3 | RNVC: 9
AT404-3: RNCC: 5 | RNVC: 2
AT404-3: RNCC: 5 | RNVC: 9
AT404-3: RNCC: 5 | RNVC: 9
AT404-3: RNCC: 5 | RNVC: 9

8 Feb 1967

3460-00-899-7820
Support Adapter

008997820
12A0102-1: RNCC: 3 | RNVC: 2
12A0102-1: RNCC: 5 | RNVC: 9

3 Feb 1967

3460-00-895-2961
Counterbore Pilot

008952961
AT489C5: RNCC: 3 | RNVC: 9

3 Feb 1967

3460-00-895-2868
Counterbore Pilot

008952868
AT489C8: RNCC: 3 | RNVC: 9
AT489C8: RNCC: 5 | RNVC: 2

3 Feb 1967

3460-00-895-2440
Indexing Fixture

008952440
55-38: RNCC: 3 | RNVC: 2
55-38: RNCC: 5 | RNVC: 9
3460-3373-0012: RNCC: 6 | RNVC: 9

1 Jan 1963

3460-00-882-3515
Abrasive Wheel

008823515
ANSI B74.13: RNCC: 3 | RNVC: 1
ANSI B74.2: RNCC: 3 | RNVC: 1
ANSI B7.1: RNCC: 3 | RNVC: 1
A36-TBNA/TY1 8 X 1/2 X 1/16: RNCC: 3 | RNVC: 2
A36-TBNA: RNCC: 5 | RNVC: 1
MIL-W-17929: RNCC: 5 | RNVC: 9

1 Jan 1960

3460-00-882-1242
Abrasive Wheel

008821242
A60M5V 10X1X3/4: RNCC: 3 | RNVC: 1
B74.2 A60MV 10X1X3/4: RNCC: 3 | RNVC: 1
B7.1: RNCC: 5 | RNVC: 1
B74.13: RNCC: 5 | RNVC: 1
A60M5VBE: RNCC: 5 | RNVC: 9
MIL-W-17929: RNCC: 5 | RNVC: 9

1 Jan 1962

3460-00-882-1227
Abrasive Wheel

008821227
B74.2 A60MV 7X3/4X5/8: RNCC: 3 | RNVC: 1
B7.1: RNCC: 5 | RNVC: 1
B74.13: RNCC: 5 | RNVC: 1
A60-M5VBE: RNCC: 5 | RNVC: 1
A60-M5VBE/TY1 7 X 5/8 X 3/4: RNCC: 5 | RNVC: 2
MIL-W-17929: RNCC: 5 | RNVC: 9

1 Jan 1962

3460-00-882-1225
Abrasive Wheel

008821225
B74.2 A36OV 7X3/4X5/8: RNCC: 3 | RNVC: 1
B74.13: RNCC: 5 | RNVC: 1
23A60-O5VBE: RNCC: 5 | RNVC: 1
B7.1: RNCC: 5 | RNVC: 1
23A60-O5VBE/TY1 7 X 5/8 X 3/4: RNCC: 5 | RNVC: 2
MIL-W-17929: RNCC: 5 | RNVC: 9

1 Jan 1962

3460-00-881-7402
Abrasive Wheel

008817402
LTCT9918-02: RNCC: 3 | RNVC: 2
LTCT9918-02: RNCC: 5 | RNVC: 9
17A60L6V22: RNCC: 5 | RNVC: 9
32A60-L6VBE: RNCC: 5 | RNVC: 9

5 May 1972

3460-00-881-5195
Lapping Plate

008815195
6PT39927: RNCC: 3 | RNVC: 2

1 Jan 1962

3460-00-877-3911
Rotary Table

008773911
922172-0001: RNCC: 3 | RNVC: 2
M2U: RNCC: 5 | RNVC: 9
3460-1144-6012: RNCC: 6 | RNVC: 9

1 Jan 1962

3460-00-872-4660
Motor Stato Mandrel

008724660
029-13597: RNCC: 3 | RNVC: 2
364-14073C: RNCC: 5 | RNVC: 9

1 Jan 1960

3460-00-868-1138
Expander Cap

008681138
1365-626-11LN328: RNCC: 3 | RNVC: 2

1 Jan 1960

3460-00-867-7033
Connector Collet

008677033
Y63-315880-710: RNCC: 3 | RNVC: 2

1 Jan 1960

3460-00-866-2588
Hold Down Machine Clamp

008662588
205SB: RNCC: 3 | RNVC: 9

29 Apr 1972

3460-00-843-5074
Abrasive Wheel

008435074
B74.2 12X1-1/2X1-1/4: RNCC: 3 | RNVC: 1
B7.1: RNCC: 5 | RNVC: 1
B74.13 A46MV: RNCC: 5 | RNVC: 1
MIL-W-17929: RNCC: 5 | RNVC: 9

1 Jan 1962

3460-00-843-5078
Abrasive Wheel

008435078
B74.2: RNCC: 3 | RNVC: 1
B74.13: RNCC: 5 | RNVC: 1
10X1X1A46M8VTY1SHA: RNCC: 5 | RNVC: 9
MIL-W-17929: RNCC: 5 | RNVC: 9

1 Jan 1962

3460-00-843-5069
Abrasive Wheel

008435069
A46 O5V22: RNCC: 3 | RNVC: 2
A46-M5VBE: RNCC: 3 | RNVC: 2
B74.13: RNCC: 5 | RNVC: 1
B74.2 A46MV 6X1X3/4: RNCC: 5 | RNVC: 1
MIL-W-17929: RNCC: 5 | RNVC: 9

1 Jan 1962

3460-00-843-5073
Abrasive Wheel

008435073
874.2: RNCC: 3 | RNVC: 1
B74.13: RNCC: 5 | RNVC: 1
MIL-W-17929: RNCC: 5 | RNVC: 9

1 Jan 1962

3460-00-843-5060
Abrasive Wheel

008435060
B74.2 A60MV 8X1X1: RNCC: 3 | RNVC: 1
B74.13: RNCC: 5 | RNVC: 1
B7.1: RNCC: 5 | RNVC: 1
MIL-W-17929: RNCC: 5 | RNVC: 9

1 Jan 1963

3460-00-843-3245
Abrasive Wheel

008433245
B74.2: RNCC: 3 | RNVC: 1
B74.13: RNCC: 5 | RNVC: 1
MIL-W-17929: RNCC: 5 | RNVC: 9

1 Jan 1963

3460-00-843-3249
Abrasive Wheel

008433249
B74.2 TY1: RNCC: 3 | RNVC: 1
B7.1: RNCC: 5 | RNVC: 1
B74.13: RNCC: 5 | RNVC: 1
MIL-W-17929: RNCC: 5 | RNVC: 9

1 Jan 1963

3460-00-842-7676
Abrasive Wheel

008427676
B74.2: RNCC: 3 | RNVC: 1
B74.13: RNCC: 5 | RNVC: 1
B7.1: RNCC: 5 | RNVC: 1
MIL-W-17929: RNCC: 5 | RNVC: 9

1 Jan 1960

3460-00-842-7665
Abrasive Wheel

008427665
B74.2: RNCC: 3 | RNVC: 1
B74.13: RNCC: 5 | RNVC: 1
MIL-W-17929: RNCC: 5 | RNVC: 9
A60M8B: RNCC: 5 | RNVC: 9

1 Jan 1962

3460-00-842-6118
Turbine Rotor Balancing Arbor

008426118
LTCT4014: RNCC: 3 | RNVC: 2
LTCT4014: RNCC: 3 | RNVC: 2

28 Dec 1966

3460-00-842-6001
Abrasive Wheel

008426001
B74.2 A60M8BF: RNCC: 3 | RNVC: 1
B7.1: RNCC: 5 | RNVC: 1
B74.13: RNCC: 5 | RNVC: 1
MIL-W-17929: RNCC: 5 | RNVC: 9

1 Jan 1962

3460-00-836-5797
Abrasive Wheel

008365797
B74.2 TY 1 10X1-1/4X1: RNCC: 3 | RNVC: 1
A36M5VBE 10X1-25X1: RNCC: 3 | RNVC: 2
8A36P8VS: RNCC: 3 | RNVC: 2
B7.1: RNCC: 5 | RNVC: 1
B74.13: RNCC: 5 | RNVC: 1
MIL-W-17929: RNCC: 5 | RNVC: 9

1 Jan 1962

Load More Results