What is Federal Supply Class 3460?

FSC 3460 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 3460) in the USA for supply items codified in the category of Machine Tool accessories.

What is NATO Supply Classification Class 3460?

NSC 3460 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 3460 in the USA) for supply items codified in the category of Machine Tool accessories.

Which Federal Supply Group is FSC 3460 in?

FSC 3460 is in Federal Supply Group (FSG) 34 which contains Metalworking Machinery.

Which NATO Supply Classification Group is NSC 3460 in?

NSC 3460is in NATO Supply Classification Group (NSG) 34 which contains Metalworking Machinery.

What is an Abrasive Wheel?

An Abrasive Wheel (WHEEL,ABRASIVE) is a rigid piece of abrasive with or without mounting facilities. Items having such mounting facilities as a fixed spindle, a threaded insert, or an arbor hole are designed for mounting on a grinding machine, tool chuck or mandrel. Items without mounting facilities are designed to be secured in a wheel holder by means of spring clamps.

What is a Bench And Machine Table Vise?

A Bench And Machine Table Vise (VISE,BENCH AND MACHINE TABLE) is a clamping device consisting of a base and two jaws mounted on a subbase. The subbase is designed for mounting on a workbench and is not normally mounted on a machine table. The base and jaw assembly may be readily detached from the subbase for use on a drilling machine, milling machine, grinding machine and the like.

A V-Block is a fixture of cast iron or steel, precision ground, having one or more V grooves machined parallel and squared with respect to the bottom, top, and ends. The block may have milled grooves on the sides to accommodate clamps which are used for holding cylindrical work.

What is a Matched V-Block Set?

A Matched V-Block Set (V-BLOCK SET,MATCHED) is a set of two or more matched V-blocks.

What is a Machine Table Vise?

A Machine Table Vise (VISE,MACHINE TABLE) is a clamping device consisting of a base and two jaws for use on a drilling machine, milling machine, grinding machine and the like. The base may be of stationary type or may be designed for angular adjustment. It may be bolt, screw, or strap clamp mounted or flat surface for resting upon the machine table. Excludes VISE, BENCH AND MACHINE TABLE.

What is a Shell Reamer Arbor?

A Shell Reamer Arbor (ARBOR,SHELL REAMER) is a bar of special steel, machined and ground, having a Morse taper or a straight shank. The body end is tapered for mounting the cutter, which also has a taper slightly smaller to assure a tight fit. It is used on drilling and milling machines for holding shell reamers.

What is a Vertical Jack?

A Vertical Jack (JACK,VERTICAL) is a device consisting of a bracing or lifting screw with nut and a flat base. Neither base nor screw revolve, the adjustment for height being made by turning the nut. It is used for leveling work on machine tools, layout and inspection tables.

What is a Grinding-Buffing-Wire Brush Wheel Arbor?

A Grinding-Buffing-Wire Brush Wheel Arbor (ARBOR,WHEEL,GRINDING-BUFFING-WIRE BRUSH) is a bar of steel, machined or ground, with flange(s) and/or steel nut or machine screw. Used with drill chucks, lathe chucks, machine shafts and the like for mounting abrasive wheels, buffing wheels and wire wheels. See also ADAPTER, SPINDLE, PORTABLE SANDER.

What is a Drill Holder?

A Drill Holder (HOLDER,DRILL) is a tool accessory used to hold a drill while drilling with a lathe. Excludes CHUCK, DRILL.

What is a Straight Shank Tool Socket?

A Straight Shank Tool Socket (SOCKET,STRAIGHT SHANK TOOL) is a machine socket adapter for extending the length of tool sockets and/or for converting the size of sockets to size of straight tool shanks.

What is a Taper Shank Tool Socket?

A Taper Shank Tool Socket (SOCKET,TAPER SHANK TOOL) is a machine socket adapter for extending the length of tool sockets and/or for converting the size of sockets to size of taper tool shanks.

What is a Lathe Center?

A Lathe Center (CENTER,LATHE) is a device having a straight or tapered shank with a shaped head used as a bearing or support for the work.

What is a Drill Chuck?

A Drill Chuck (CHUCK,DRILL) is an accessory for holding tools with a plain cylindrical shank such as drills, taps, or the like, by means of two or more internal selfcentering (universal) jaws. It may be attached directly to the spindle of a machine, arbor, shaft, hand mechanism, or the like without the use of centers. The jaws are simultaneously adjusted by an adjusting nut, sleeve, feed screw, or the like. The maximum rated capacity of this item is one (1) inch (25.4 mm) diameter. For universal chucks having a capacity in excess of one (1) inch (25.4 mm), see CHUCK, UNIVERSAL JAW. Excludes CHUCK, CENTERING, LATHE.

What is a Machine Collet?

A Machine Collet (COLLET,MACHINE) is a work holding device consisting of a longitudinally slotted sleeve which has a tapering or conical end designed to fit into a corresponding taper of a chuck so that the lengthwise movement of the sleeve causes a contraction or expansion of the gripping surfaces. The gripping or holding tension is actuated by a backward pull (draw in) or by a forward push (force in). Used on lathes, milling machines, screw machines and the like. Excludes SOCKET, STRAIGHT SHANK TOOL and SOCKET, TAPER SHANK TOOL.

A Lathe Dog (DOG,LATHE) is a machine tool accessory used as a clamp for gripping a piece of work and conveying motion to it from the face plate.

What is an Independent Jaw Chuck?

An Independent Jaw Chuck (CHUCK,INDEPENDENT JAW) is an accessory used for holding objects directly to the spindle of a machine, arbor, shaft or the like without the use of centers. Two or more jaws are adjusted separately, each by its own adjusting screw, to facilitate holding objects of irregular shape.

What is an Universal Jaw Chuck?

An Universal Jaw Chuck (CHUCK,UNIVERSAL JAW) is an accessory used for holding objects directly to the spindle of a machine, arbor, shaft, or the like, without the use of centers. Two or more self-centering jaws are adjusted simultaneously, usually by rotation of a scroll gear which engages slots or teeth in the back of the jaws. Maximum rated capacity is in excess of one (1) inch (25.4 mm) diameter. For universal chucks having a maximum capacity of one (1) inch (25.4 mm) or less, see CHUCK, DRILL. Excludes CHUCK, CENTERING, LATHE.

What is a Cutting Tool Holder?

A Cutting Tool Holder (HOLDER,CUTTING TOOL) is an accessory designed to hold and support cutter bits or sleeve type boring bars of various types and sizes. It is used on lathes, automatic machines, planers, and shapers. Excludes items such as tool posts.

What is a Boring Tool Bar?

A Boring Tool Bar (BAR,BORING TOOL) is an internal turning tool, usually having a single cutting point, used to enlarge a hole, to finish to size, and to insure its being true with a specificed center line.

What is a Counterbore Pilot?

A Counterbore Pilot (PILOT,COUNTERBORE) is excludes PILOT, COUNTERSINK.

What is a Countersink Pilot?

A Countersink Pilot (PILOT,COUNTERSINK) is a device specifically designed for use in conjunction with a HOLDER, COUNTERSINK to guide and align countersink cutters. Excludes PILOT, COUNTERBORE.

What is a Solid Machine Mandrel?

A Solid Machine Mandrel (MANDREL,MACHINE,SOLID) is a cylindrical-shaped tool with a slight taper on the over-all length, centered on each end with a flat milled on the ends for a holder. It is used for holding work for machining operations on lathes and milling machines.

What is a Machine Tool Attachment Grinding Machine?

A Machine Tool Attachment Grinding Machine (GRINDING MACHINE,MACHINE TOOL ATTACHMENT) is a motor driven device consisting of an abrasive wheel attached either directly to the motor shaft or to a spindle unit which is driven by a belt and an electric motor. May be used on lathes, milling machines, boring mills, shapers and slotters for grinding surface plates, rolls, journals, lathe centers, internal bores, external surfaces, or the like.

What is an Expansion Mandrel?

An Expansion Mandrel (MANDREL,EXPANSION) is a holding tool, tapered on the over-all length and centered on both ends with a flat milled or ground on one end for aholder which, together with a flexible sleeve, is forcibly inserted into the work to support it for machining operations on lathes or milling machines.

What is a Milling Cutter Arbor?

A Milling Cutter Arbor (ARBOR,MILLING CUTTER) is a bar of special steel, machined and ground, having a standard milling machine, Morse or Brown and Sharpe taper shank and furnished with or without bearing sleeves. It is used for mounting plain hole milling cutters of various types and sizes.

What is a Counterbore Holder?

A Counterbore Holder (HOLDER,COUNTERBORE) is a cylindrical body having a straight or tapered shank which holds the cutter in place by driving lugs or two splines 180 degrees (3.1 radians) apart. It is used extensively on screw machines and boring mills. Excludes HOLDER, COUNTERSINK.

What is a Countersink Holder?

A Countersink Holder (HOLDER,COUNTERSINK) is a cylindrical shaped device specifically designed to hold and position, as well as to control the cutting depth of a COUNTERSINK. The holder may have a micrometer stop adjustment or a plain sleeve with nut adjustment. Countersink cutters accommodated by this holder are of a specific design. Excludes HOLDER, COUNTERBORE.

What is a Milling Machine Spindle End Adapter?

A Milling Machine Spindle End Adapter (ADAPTER,SPINDLE END,MILLING MACHINE) is an adapter designed to fit into the end of a milling machine spindle and accommodate various cutting tool holders and/or end milling cutters having shanks of different types and sizes. See also ARBOR (as modified).

What is a Shell End Mill Arbor?

A Shell End Mill Arbor (ARBOR,SHELL END MILL) is a bar of special steel, machined and ground, having a standard milling machine or a Brown and Sharpe tapered shank. The body ends are ground to various diameters for mounting the different sizes of shell and mill cutters. It is used with adapters on milling machines having standardized spindle end and Brown and Sharpe milling machines having taper-nose or threaded spindles.

What is a Wheel Dressing Diamond Nib?

A Wheel Dressing Diamond Nib (NIB,DIAMOND,WHEEL DRESSING) is an item consisting of an industrial diamond mounted in the end of a metal rod or bar and exposed to provide a cutting point or edge. It is used for truing, shaping, and dressing abrasive wheels. When in use, it is mounted in a suitable holder on a stand or machine and its movement across the wheel surface may be either manual or machine powered.

What is a Cylinder Hone Stone And Holder?

A Cylinder Hone Stone And Holder (STONE AND HOLDER,CYLINDER HONE) is a mounted length of abrasive or combination of abrasive and cork. The stone is integral with the mount for use in conjunction with a cylinder honing tool.

What is a Buffing Wheel?

A Buffing Wheel (WHEEL,BUFFING) is a disk shaped item of loose, bonded, or solid construction having an arbor hole for attaching to a rotary power-operated tool or machine. It may be fabricated of a single piece of felt, rubber, leather, cork, or the like; a single piece of wood, leather covered; or plies of muslin, flannel, canvass, or the like sewed or cemented together. It is used for buffing and/or polishing or burnishing. Excludes BRUSH, ROTARY (as modified); WHEEL, ABRASIVE; and PAD, POLISHING AND RUBBING.

What is a Rotary Wheel Wire Brush?

A Rotary Wheel Wire Brush (BRUSH,WIRE,ROTARY WHEEL) is a disk shaped unit having a fill section of wire material extending from the perimeter of the disk perpendicular to the axis of the hub. It is used with a rotary power-operated device for roughing, buffing and/or polishing various surfaces. See also BRUSH, WIRE, ROTARY CUP; BRUSH, WIRE, ROTARY END; and BRUSH, FIBER, ROTARY WHEEL.

What is an Abrasive Wheel Set?

An Abrasive Wheel Set (WHEEL SET,ABRASIVE) is a group of items consisting of two or more WHEEL, ABRASIVE, of various shapes and grits, with or without mounting facilities. This may include a case or holder for storage of the items.

What is an Expansion Mandrel Set?

An Expansion Mandrel Set (MANDREL SET,EXPANSION) is a group of two or more MANDREL, EXPANSION.

What is a Drill Chuck Key?

A Drill Chuck Key (KEY,DRILL CHUCK) is a hand tool designed for tightening or loosening the jaws of a drill chuck.

What is a Lapping Plate?

A Lapping Plate (PLATE,LAPPING) is a round, rectangular, or square-shaped item manufactured from various metals. By comparison, its thickness is less than its length, width, or diameter. The lap (abrading surface) has narrow V-shaped or straight-sided grooves to facilitate abrading. Used to produce a geometrically flat or smooth surface by abrasion. Excludes BLOCK, LAPPING. See also PLATE, DUPLEX, SURFACE AND LAPPING and PLATE, SURFACE.

What is a Lapping Block?

A Lapping Block (BLOCK,LAPPING) is a cast iron item of solid (not ribbed) rectangular construction with plain surface(s) suitable for hand application to the part to be lapped. See also PLATE, DUPLEX, SURFACE AND LAPPING; PLATE, LAPPING; and PLATE, SURFACE.

What is a Quick Change Chuck?

A Quick Change Chuck (CHUCK,QUICK CHANGE) is an item used to hold tools, such as drills, reamers, and the like without the use of jaws. It employs a sliding collar mechanism which engages a removable adapter to facilitate installation or removal of the tool.

What is a Quick Change Chuck Adapter?

A Quick Change Chuck Adapter (ADAPTER,QUICK CHANGE CHUCK) is a cylindrical shaped item designed to hold various cutting tools and to simplify their installation in or removal from a quick change type chuck.

What is a Portable Power Tool Counterbalance?

A Portable Power Tool Counterbalance (COUNTERBALANCE,PORTABLE POWER TOOL) is a device consisting of an adjustable spring actuated drum or reel and a wire cable having a lifting eye or hook on one end. It is designed for aerial suspension over the work bench, assembly line or the like in holding tools in counterbalanced suspension.

What is an Indexing Fixture?

An Indexing Fixture is an item designed to accurately select any degree of angle for milling, grinding, drilling, or boring operations. It is not furnished with a work-holding device such as a chuck or vise. It may be furnished with centers. It may be of the automatic angle selector type, manual (perforated disk) angle selector type, or optical system positioning type. It may consist of two units (a head and a tail-stock). Excludes HOLDING FIXTURE, COLLET CHUCKING, MACHINE.

What is a Milling-Grinding-Drilling-Slotting Attachment?

A Milling-Grinding-Drilling-Slotting Attachment is a motor driven unit for milling, grinding, drilling, boring, slotting, gear cutting, thread milling, keyseating and external and internal grinding operations. It is adapted for mounting on a lathe, planer, shaper and/or boring mill. May also be used as a portable self-contained unit suitable for mounting on the item being worked, or bench mounting when provided with a feed table.

What is a Polishing And Rubbing Pad?

A Polishing And Rubbing Pad (PAD,POLISHING AND RUBBING) is a flat, circular disk of flexible or semiflexible fabric designed for attachment to a backing pad or polishing holder of a power driven polisher or disk buffer, used for polishing and rubbing. Excludes WHEEL, BUFFING.

What is a Lathe Centering Chuck?

A Lathe Centering Chuck (CHUCK,CENTERING,LATHE) is an item designed for centering and supporting round work without centers, such as centerless armature shafts and the like, in the tailstock of small engine lathes by means of three or more self-centering brass or bronze jaws, or an adjustable collet type brass or bronze bushing. The jaws or bushing may be adjusted for either running fit or driving fit on the round work. It is attached to the lathe by means of a tapered shank. Excludes CHUCK, DRILL and CHUCK, UNIVERSAL JAW.

What is an Indexing Fixture Plate?

An Indexing Fixture Plate (PLATE,INDEXING FIXTURE) is a disk shaped item containing equally spaced holes around the face. It is used on an INDEXING FIXTURE to divide a 360 degree rotation of work into equal arcs.

What is an Expansion Mandrel Sleeve?

An Expansion Mandrel Sleeve (SLEEVE,EXPANSION MANDREL) is a cylindrical spring type metal expansion sleeve which is a component of a MANDREL, EXPANSION.

Machine Tool accessories - United States (US)

Federal Supply Class (FSC): 3460

NATO Supply Classification Class (NSC): 3460

Federal Supply Group (FSG): 34 Metalworking Machinery

NATO Supply Classification Group (NSG): 34 Metalworking Machinery

Items Managed by United States (US) - NCB is 00 to 09

Page 16 of 24

NSN Format for Machine Tool accessories
Codified by United States

34	60	01	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 3460 is a classification for Machine Tool Accessories within NATO Supply Group 34, which is dedicated to Metalworking Machinery.

Machine Tool Accessories refer to a wide range of tools and equipment that are used in conjunction with machine tools to enhance their functionality and performance. These accessories can include items such as cutting tools, tool holders, workholding devices, measuring instruments, lubrication systems, and other components that are essential for the operation and maintenance of machine tools.

The purpose of NATO Supply Class 3460 is to provide a standardized classification system for machine tool accessories within the NATO military alliance. This classification system helps to streamline procurement processes and ensure compatibility and interoperability among different NATO member countries.

By categorizing machine tool accessories under NATO Supply Class 3460, it becomes easier for military organizations and defense contractors to identify, source, and procure the necessary accessories for their metalworking machinery. This classification system also facilitates inventory management and logistics planning for military operations involving metalworking machinery.

In summary, NATO Supply Class 3460 for Machine Tool Accessories in NATO Supply Group 34 for Metalworking Machinery is a classification system that helps to organize and standardize the procurement and use of machine tool accessories within the NATO military alliance.

FSC 3460 Machine Tool accessories - United States (US)

Excludes Abrasive Wheels, Cones, and other Abrasive Attachments for use only on Hand Held Power Tools.

Frequently Asked Questions(FAQ) for Federal Supply Class 3460

What is Federal Supply Class 3460?: FSC 3460 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 3460) in the USA for supply items codified in the category of Machine Tool accessories.
What is NATO Supply Classification Class 3460?: NSC 3460 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 3460 in the USA) for supply items codified in the category of Machine Tool accessories.
Which Federal Supply Group is FSC 3460 in?: FSC 3460 is in Federal Supply Group (FSG) 34 which contains Metalworking Machinery.
Which NATO Supply Classification Group is NSC 3460 in?: NSC 3460 is in NATO Supply Classification Group (NSG) 34 which contains Metalworking Machinery.

Supply Items Included in Federal Supply Class 3460

What is an Abrasive Wheel? 1115 Items: An Abrasive Wheel (WHEEL,ABRASIVE) is a rigid piece of abrasive with or without mounting facilities. Items having such mounting facilities as a fixed spindle, a threaded insert, or an arbor hole are designed for mounting on a grinding machine, tool chuck or mandrel. Items without mounting facilities are designed to be secured in a wheel holder by means of spring clamps.
What is a Bench And Machine Table Vise? 15 Items: A Bench And Machine Table Vise (VISE,BENCH AND MACHINE TABLE) is a clamping device consisting of a base and two jaws mounted on a subbase. The subbase is designed for mounting on a workbench and is not normally mounted on a machine table. The base and jaw assembly may be readily detached from the subbase for use on a drilling machine, milling machine, grinding machine and the like.
Clamp,Parallel,Machinist's 22 Items
What is a V-Block? 59 Items: A V-Block is a fixture of cast iron or steel, precision ground, having one or more V grooves machined parallel and squared with respect to the bottom, top, and ends. The block may have milled grooves on the sides to accommodate clamps which are used for holding cylindrical work.
What is a Matched V-Block Set? 14 Items: A Matched V-Block Set (V-BLOCK SET,MATCHED) is a set of two or more matched V-blocks.
What is a Machine Table Vise? 38 Items: A Machine Table Vise (VISE,MACHINE TABLE) is a clamping device consisting of a base and two jaws for use on a drilling machine, milling machine, grinding machine and the like. The base may be of stationary type or may be designed for angular adjustment. It may be bolt, screw, or strap clamp mounted or flat surface for resting upon the machine table. Excludes VISE, BENCH AND MACHINE TABLE.
What is a Shell Reamer Arbor? 15 Items: A Shell Reamer Arbor (ARBOR,SHELL REAMER) is a bar of special steel, machined and ground, having a Morse taper or a straight shank. The body end is tapered for mounting the cutter, which also has a taper slightly smaller to assure a tight fit. It is used on drilling and milling machines for holding shell reamers.
What is a Vertical Jack? 20 Items: A Vertical Jack (JACK,VERTICAL) is a device consisting of a bracing or lifting screw with nut and a flat base. Neither base nor screw revolve, the adjustment for height being made by turning the nut. It is used for leveling work on machine tools, layout and inspection tables.
What is a Grinding-Buffing-Wire Brush Wheel Arbor? 12 Items: A Grinding-Buffing-Wire Brush Wheel Arbor (ARBOR,WHEEL,GRINDING-BUFFING-WIRE BRUSH) is a bar of steel, machined or ground, with flange(s) and/or steel nut or machine screw. Used with drill chucks, lathe chucks, machine shafts and the like for mounting abrasive wheels, buffing wheels and wire wheels. See also ADAPTER, SPINDLE, PORTABLE SANDER.
What is a Drill Holder? 11 Items: A Drill Holder (HOLDER,DRILL) is a tool accessory used to hold a drill while drilling with a lathe. Excludes CHUCK, DRILL.
What is a Straight Shank Tool Socket? 10 Items: A Straight Shank Tool Socket (SOCKET,STRAIGHT SHANK TOOL) is a machine socket adapter for extending the length of tool sockets and/or for converting the size of sockets to size of straight tool shanks.
What is a Taper Shank Tool Socket? 75 Items: A Taper Shank Tool Socket (SOCKET,TAPER SHANK TOOL) is a machine socket adapter for extending the length of tool sockets and/or for converting the size of sockets to size of taper tool shanks.
What is a Lathe Center? 64 Items: A Lathe Center (CENTER,LATHE) is a device having a straight or tapered shank with a shaped head used as a bearing or support for the work.
What is a Drill Chuck? 124 Items: A Drill Chuck (CHUCK,DRILL) is an accessory for holding tools with a plain cylindrical shank such as drills, taps, or the like, by means of two or more internal selfcentering (universal) jaws. It may be attached directly to the spindle of a machine, arbor, shaft, hand mechanism, or the like without the use of centers. The jaws are simultaneously adjusted by an adjusting nut, sleeve, feed screw, or the like. The maximum rated capacity of this item is one (1) inch (25.4 mm) diameter. For universal chucks having a capacity in excess of one (1) inch (25.4 mm), see CHUCK, UNIVERSAL JAW. Excludes CHUCK, CENTERING, LATHE.
What is a Machine Collet? 420 Items: A Machine Collet (COLLET,MACHINE) is a work holding device consisting of a longitudinally slotted sleeve which has a tapering or conical end designed to fit into a corresponding taper of a chuck so that the lengthwise movement of the sleeve causes a contraction or expansion of the gripping surfaces. The gripping or holding tension is actuated by a backward pull (draw in) or by a forward push (force in). Used on lathes, milling machines, screw machines and the like. Excludes SOCKET, STRAIGHT SHANK TOOL and SOCKET, TAPER SHANK TOOL.
What is a Lathe Dog? 53 Items: A Lathe Dog (DOG,LATHE) is a machine tool accessory used as a clamp for gripping a piece of work and conveying motion to it from the face plate.
What is an Independent Jaw Chuck? 21 Items: An Independent Jaw Chuck (CHUCK,INDEPENDENT JAW) is an accessory used for holding objects directly to the spindle of a machine, arbor, shaft or the like without the use of centers. Two or more jaws are adjusted separately, each by its own adjusting screw, to facilitate holding objects of irregular shape.
What is an Universal Jaw Chuck? 56 Items: An Universal Jaw Chuck (CHUCK,UNIVERSAL JAW) is an accessory used for holding objects directly to the spindle of a machine, arbor, shaft, or the like, without the use of centers. Two or more self-centering jaws are adjusted simultaneously, usually by rotation of a scroll gear which engages slots or teeth in the back of the jaws. Maximum rated capacity is in excess of one (1) inch (25.4 mm) diameter. For universal chucks having a maximum capacity of one (1) inch (25.4 mm) or less, see CHUCK, DRILL. Excludes CHUCK, CENTERING, LATHE.
What is a Cutting Tool Holder? 360 Items: A Cutting Tool Holder (HOLDER,CUTTING TOOL) is an accessory designed to hold and support cutter bits or sleeve type boring bars of various types and sizes. It is used on lathes, automatic machines, planers, and shapers. Excludes items such as tool posts.
What is a Boring Tool Bar? 124 Items: A Boring Tool Bar (BAR,BORING TOOL) is an internal turning tool, usually having a single cutting point, used to enlarge a hole, to finish to size, and to insure its being true with a specificed center line.
What is a Counterbore Pilot? 148 Items: A Counterbore Pilot (PILOT,COUNTERBORE) is excludes PILOT, COUNTERSINK.
What is a Countersink Pilot? 56 Items: A Countersink Pilot (PILOT,COUNTERSINK) is a device specifically designed for use in conjunction with a HOLDER, COUNTERSINK to guide and align countersink cutters. Excludes PILOT, COUNTERBORE.
What is a Solid Machine Mandrel? 184 Items: A Solid Machine Mandrel (MANDREL,MACHINE,SOLID) is a cylindrical-shaped tool with a slight taper on the over-all length, centered on each end with a flat milled on the ends for a holder. It is used for holding work for machining operations on lathes and milling machines.
What is a Machine Tool Attachment Grinding Machine? 44 Items: A Machine Tool Attachment Grinding Machine (GRINDING MACHINE,MACHINE TOOL ATTACHMENT) is a motor driven device consisting of an abrasive wheel attached either directly to the motor shaft or to a spindle unit which is driven by a belt and an electric motor. May be used on lathes, milling machines, boring mills, shapers and slotters for grinding surface plates, rolls, journals, lathe centers, internal bores, external surfaces, or the like.
What is an Expansion Mandrel? 127 Items: An Expansion Mandrel (MANDREL,EXPANSION) is a holding tool, tapered on the over-all length and centered on both ends with a flat milled or ground on one end for aholder which, together with a flexible sleeve, is forcibly inserted into the work to support it for machining operations on lathes or milling machines.
What is a Milling Cutter Arbor? 35 Items: A Milling Cutter Arbor (ARBOR,MILLING CUTTER) is a bar of special steel, machined and ground, having a standard milling machine, Morse or Brown and Sharpe taper shank and furnished with or without bearing sleeves. It is used for mounting plain hole milling cutters of various types and sizes.
What is a Counterbore Holder? 17 Items: A Counterbore Holder (HOLDER,COUNTERBORE) is a cylindrical body having a straight or tapered shank which holds the cutter in place by driving lugs or two splines 180 degrees (3.1 radians) apart. It is used extensively on screw machines and boring mills. Excludes HOLDER, COUNTERSINK.
What is a Countersink Holder? 28 Items: A Countersink Holder (HOLDER,COUNTERSINK) is a cylindrical shaped device specifically designed to hold and position, as well as to control the cutting depth of a COUNTERSINK. The holder may have a micrometer stop adjustment or a plain sleeve with nut adjustment. Countersink cutters accommodated by this holder are of a specific design. Excludes HOLDER, COUNTERBORE.
What is a Milling Machine Spindle End Adapter? 26 Items: A Milling Machine Spindle End Adapter (ADAPTER,SPINDLE END,MILLING MACHINE) is an adapter designed to fit into the end of a milling machine spindle and accommodate various cutting tool holders and/or end milling cutters having shanks of different types and sizes. See also ARBOR (as modified).
Arbor,Hole Saw 61 Items
What is a Shell End Mill Arbor? 10 Items: A Shell End Mill Arbor (ARBOR,SHELL END MILL) is a bar of special steel, machined and ground, having a standard milling machine or a Brown and Sharpe tapered shank. The body ends are ground to various diameters for mounting the different sizes of shell and mill cutters. It is used with adapters on milling machines having standardized spindle end and Brown and Sharpe milling machines having taper-nose or threaded spindles.
What is a Wheel Dressing Diamond Nib? 27 Items: A Wheel Dressing Diamond Nib (NIB,DIAMOND,WHEEL DRESSING) is an item consisting of an industrial diamond mounted in the end of a metal rod or bar and exposed to provide a cutting point or edge. It is used for truing, shaping, and dressing abrasive wheels. When in use, it is mounted in a suitable holder on a stand or machine and its movement across the wheel surface may be either manual or machine powered.
What is a Cylinder Hone Stone And Holder? 23 Items: A Cylinder Hone Stone And Holder (STONE AND HOLDER,CYLINDER HONE) is a mounted length of abrasive or combination of abrasive and cork. The stone is integral with the mount for use in conjunction with a cylinder honing tool.
Arbor,Drill Chuck 47 Items
What is a Buffing Wheel? 30 Items: A Buffing Wheel (WHEEL,BUFFING) is a disk shaped item of loose, bonded, or solid construction having an arbor hole for attaching to a rotary power-operated tool or machine. It may be fabricated of a single piece of felt, rubber, leather, cork, or the like; a single piece of wood, leather covered; or plies of muslin, flannel, canvass, or the like sewed or cemented together. It is used for buffing and/or polishing or burnishing. Excludes BRUSH, ROTARY (as modified); WHEEL, ABRASIVE; and PAD, POLISHING AND RUBBING.
What is a Rotary Wheel Wire Brush? 16 Items: A Rotary Wheel Wire Brush (BRUSH,WIRE,ROTARY WHEEL) is a disk shaped unit having a fill section of wire material extending from the perimeter of the disk perpendicular to the axis of the hub. It is used with a rotary power-operated device for roughing, buffing and/or polishing various surfaces. See also BRUSH, WIRE, ROTARY CUP; BRUSH, WIRE, ROTARY END; and BRUSH, FIBER, ROTARY WHEEL.
What is an Abrasive Wheel Set? 14 Items: An Abrasive Wheel Set (WHEEL SET,ABRASIVE) is a group of items consisting of two or more WHEEL, ABRASIVE, of various shapes and grits, with or without mounting facilities. This may include a case or holder for storage of the items.
What is an Expansion Mandrel Set? 22 Items: An Expansion Mandrel Set (MANDREL SET,EXPANSION) is a group of two or more MANDREL, EXPANSION.
What is a Drill Chuck Key? 55 Items: A Drill Chuck Key (KEY,DRILL CHUCK) is a hand tool designed for tightening or loosening the jaws of a drill chuck.
Collet Set,Machine 27 Items
Head,Boring 20 Items
What is a Lapping Plate? 67 Items: A Lapping Plate (PLATE,LAPPING) is a round, rectangular, or square-shaped item manufactured from various metals. By comparison, its thickness is less than its length, width, or diameter. The lap (abrading surface) has narrow V-shaped or straight-sided grooves to facilitate abrading. Used to produce a geometrically flat or smooth surface by abrasion. Excludes BLOCK, LAPPING. See also PLATE, DUPLEX, SURFACE AND LAPPING and PLATE, SURFACE.
What is a Lapping Block? 24 Items: A Lapping Block (BLOCK,LAPPING) is a cast iron item of solid (not ribbed) rectangular construction with plain surface(s) suitable for hand application to the part to be lapped. See also PLATE, DUPLEX, SURFACE AND LAPPING; PLATE, LAPPING; and PLATE, SURFACE.
What is a Quick Change Chuck? 35 Items: A Quick Change Chuck (CHUCK,QUICK CHANGE) is an item used to hold tools, such as drills, reamers, and the like without the use of jaws. It employs a sliding collar mechanism which engages a removable adapter to facilitate installation or removal of the tool.
What is a Quick Change Chuck Adapter? 35 Items: A Quick Change Chuck Adapter (ADAPTER,QUICK CHANGE CHUCK) is a cylindrical shaped item designed to hold various cutting tools and to simplify their installation in or removal from a quick change type chuck.
What is a Portable Power Tool Counterbalance? 10 Items: A Portable Power Tool Counterbalance (COUNTERBALANCE,PORTABLE POWER TOOL) is a device consisting of an adjustable spring actuated drum or reel and a wire cable having a lifting eye or hook on one end. It is designed for aerial suspension over the work bench, assembly line or the like in holding tools in counterbalanced suspension.
Clamp,Parallel,Toolmaker's 10 Items
What is an Indexing Fixture? 32 Items: An Indexing Fixture is an item designed to accurately select any degree of angle for milling, grinding, drilling, or boring operations. It is not furnished with a work-holding device such as a chuck or vise. It may be furnished with centers. It may be of the automatic angle selector type, manual (perforated disk) angle selector type, or optical system positioning type. It may consist of two units (a head and a tail-stock). Excludes HOLDING FIXTURE, COLLET CHUCKING, MACHINE.
What is a Milling-Grinding-Drilling-Slotting Attachment? 15 Items: A Milling-Grinding-Drilling-Slotting Attachment is a motor driven unit for milling, grinding, drilling, boring, slotting, gear cutting, thread milling, keyseating and external and internal grinding operations. It is adapted for mounting on a lathe, planer, shaper and/or boring mill. May also be used as a portable self-contained unit suitable for mounting on the item being worked, or bench mounting when provided with a feed table.
What is a Polishing And Rubbing Pad? 13 Items: A Polishing And Rubbing Pad (PAD,POLISHING AND RUBBING) is a flat, circular disk of flexible or semiflexible fabric designed for attachment to a backing pad or polishing holder of a power driven polisher or disk buffer, used for polishing and rubbing. Excludes WHEEL, BUFFING.
What is a Lathe Centering Chuck? 10 Items: A Lathe Centering Chuck (CHUCK,CENTERING,LATHE) is an item designed for centering and supporting round work without centers, such as centerless armature shafts and the like, in the tailstock of small engine lathes by means of three or more self-centering brass or bronze jaws, or an adjustable collet type brass or bronze bushing. The jaws or bushing may be adjusted for either running fit or driving fit on the round work. It is attached to the lathe by means of a tapered shank. Excludes CHUCK, DRILL and CHUCK, UNIVERSAL JAW.
What is an Indexing Fixture Plate? 16 Items: An Indexing Fixture Plate (PLATE,INDEXING FIXTURE) is a disk shaped item containing equally spaced holes around the face. It is used on an INDEXING FIXTURE to divide a 360 degree rotation of work into equal arcs.
What is an Expansion Mandrel Sleeve? 273 Items: An Expansion Mandrel Sleeve (SLEEVE,EXPANSION MANDREL) is a cylindrical spring type metal expansion sleeve which is a component of a MANDREL, EXPANSION.
What is a Portable Metalworking Machinery Coolant Unit? 13 Items: A Portable Metalworking Machinery Coolant Unit (COOLANT UNIT,METALWORKING MACHINERY,PORTABLE) is a device consisting of a tank, pump, and fluid delivery assembly(ies), used to deliver coolant fluid to metalworking machinery not equipped with integral coolant systems.
What is a Tube Bending Mandrel? 76 Items: A Tube Bending Mandrel (MANDREL,TUBE BENDING) is a tool that may be either flexible or rigid, designed to be inserted into a tube or hollow section to support the wall and prevent it from flattening or collapsing during bending operations. It is used with a BENDING MACHINE, PIPE AND CONDUIT.
What is a Positioning Table? 33 Items: A Positioning Table (TABLE,POSITIONING) is an item designed to accurately position another item for inspection, testing, maintenance or machining. The item is capable of linear and/or rotational movement but is not furnished with a work-holding device such as a chuck or vise. It may be manually operated or motor driven. Excludes POSITIONER, WELDING.
What is a Hold Down Machine Clamp? 119 Items: A Hold Down Machine Clamp (CLAMP,MACHINE,HOLD DOWN) is a clamp for holding down work on planer, punch presses, milling machines, boring mills, drill presses and the like.
What is a Machine Cleaning Wiper? 42 Items: A Machine Cleaning Wiper (WIPER,MACHINE CLEANING) is an item designed to remove fluids, dust, hot chips and other contaminants from surfaces and tool ways during normal operation of the equipment.
What is a Metalworking Machinery Fixture? 49 Items: A Metalworking Machinery Fixture (FIXTURE,METALWORKING MACHINERY) is an item mounted on a machine table and designed for clamping and releasing a workpiece in volume production. The item may operate as a vertical or horozontal fixture, depending on the induvidual design type.
Holder Section,Cutting Tool 12 Items
What is a Milling Machine Honing Mandrel? 66 Items: A Milling Machine Honing Mandrel (MANDREL,HONING,MILLING MACHINE) is a metal item machined and ground with an integral shank. May have an integral guide shoe that retains and turns a dressing stone. Used in finishing inside surfaces.
What is a Jaw Clamp Insert Set? 16 Items: A Jaw Clamp Insert Set (INSERT SET,JAW CLAMP) is two matched items which fit into the opposing faces of the jaw(s) of a clamp or vise. They permit an item which has a curved surface to be held without damage due to crushing or squeezing during machining operations. Excludes FAIRLEAD, BLOCK.
What is a Lathe Steady Rest? 11 Items: A Lathe Steady Rest (STEADY REST,LATHE) is an accessory, with one or more friction or roller type adjustable jaws, designed to support round material during the machining process. It may be bed or carriage mounted.
What is a Collet Chuck? 104 Items: A Collet Chuck (CHUCK,COLLET) is an item designed to be adapted to a machine spindle to accommodate a collet for holding work to be machined. It may be mounted directly to the spindle or to an arbor or adapter which in turn mounts to the spindle. The chuck is manipulated to contract or expand the collet which in turn grips or releases the work. Excludes HOLDING FIXTURE, COLLET CHUCKING, MACHINE.

Stock Items From Supply Class 3460 Page 16 of 24

3460-00-150-7163
Split Mandrel

001507163
935: RNCC: 3 | RNVC: 2
935: RNCC: 3 | RNVC: 9
935: RNCC: 5 | RNVC: 9

2 Jun 1971

3460-00-018-6050
Edge Finder

000186050
599-792-1: RNCC: 3 | RNVC: 2

22 Apr 1967

3460-00-168-3220
Stud Chuck

001683220
500-001-007: RNCC: 3 | RNVC: 2
6117 1-4: RNCC: 5 | RNVC: 9
C117 1-4: RNCC: 5 | RNVC: 9
C184 1-4: RNCC: 5 | RNVC: 9

1 Jan 1963

3460-00-203-6902
Toolmaker's Parallel Clamp

002036902
7902568: RNCC: 3 | RNVC: 1
161D: RNCC: 3 | RNVC: 2
599-754-20-1: RNCC: 3 | RNVC: 2
118D: RNCC: 5 | RNVC: 2
GGGC406TYPE2CLASSB: RNCC: 5 | RNVC: 9
GGG-C-406 TY2CLB: RNCC: 5 | RNVC: 9
25-0610-40: RNCC: 5 | RNVC: 9

1 Jan 1963

3460-00-223-3763
Lathe Center

002233763
CE2160ANDCE2172: RNCC: 3 | RNVC: 2

1 Jan 1963

3460-00-224-8637
Taper Shank Tool Socket

002248637
AA51189-09: RNCC: 2 | RNVC: 2
A-A-51189: RNCC: 4 | RNVC: 1
A-A-51132 TY 3 CL 1 SIZE 9: RNCC: 5 | RNVC: 9
OO-S-550: RNCC: 5 | RNVC: 9
AA51132-072C: RNCC: 5 | RNVC: 9
A-A-51132: RNCC: 5 | RNVC: 9

1 Jan 1963

3460-00-225-1955
Abrasive Wheel

002251955
1111-0072: RNCC: 3 | RNVC: 2
80-F: RNCC: 3 | RNVC: 2
8-F: RNCC: 3 | RNVC: 2
1129-0007-P10: RNCC: 5 | RNVC: 9
1129-0007: RNCC: 5 | RNVC: 9
RA1129-0007AA: RNCC: 5 | RNVC: 9
1111-0072: RNCC: 5 | RNVC: 9

18 Mar 1970

3460-00-231-2251
Drill Chuck

002312251
A-A-51140A CL 1 STYL A SZ 4: RNCC: 4 | RNVC: 1
A-A-51140: RNCC: 4 | RNVC: 1
GGGC350: RNCC: 5 | RNVC: 9

1 Jan 1963

3460-00-240-7286
Planer Jack

002407286
GGG-J-51: RNCC: 4 | RNVC: 1

1 Jan 1963

3460-00-240-7287
Planer Jack

002407287
GGGJ51: RNCC: 4 | RNVC: 1

1 Jan 1963

3460-00-254-3060
Solid Machine Mandrel

002543060
A-A-51129 TY 1 SIZE 15: RNCC: 3 | RNVC: 2
A-A-51129: RNCC: 4 | RNVC: 1
00M251: RNCC: 5 | RNVC: 9

1 Jan 1963

NSN 3460-00-254-3068 002543068 MANDREL,MACHINE,SOLID

3460-00-254-3068
Solid Machine Mandrel

002543068
AA51129-17: RNCC: 2 | RNVC: 2
A-A-51129: RNCC: 4 | RNVC: 1
A-A-51129 TY 1 SIZE 17: RNCC: 5 | RNVC: 9
00-M-251: RNCC: 5 | RNVC: 9

1 Jan 1963

3460-00-364-5005
Abrasive Wheel

003645005
ANSI B7.1: RNCC: 3 | RNVC: 1
ANSI B74.13: RNCC: 3 | RNVC: 1
ANSI B74.2: RNCC: 3 | RNVC: 1
13993135: RNCC: 3 | RNVC: 1
GGG-W-290: RNCC: 5 | RNVC: 9

22 Feb 1974

3460-00-435-0387
Abrasive Wheel

004350387
ANSI B7.1: RNCC: 3 | RNVC: 1
ANSI B74.13: RNCC: 3 | RNVC: 1
ANSI B74.2: RNCC: 3 | RNVC: 1
A60-T6BF: RNCC: 3 | RNVC: 1
A60-T6B: RNCC: 5 | RNVC: 9
MIL-W-17929: RNCC: 5 | RNVC: 9

20 May 1974

3460-00-540-1291
Hole Saw Arbor

005401291
ASME B94-54: RNCC: 3 | RNVC: 1
LHS3D: RNCC: 5 | RNVC: 2
2: RNCC: 5 | RNVC: 2
A-A-51135 STYLE X: RNCC: 5 | RNVC: 9
GGG-S-66: RNCC: 5 | RNVC: 9
510493-3: RNCC: C | RNVC: 1

1 Jan 1963

3460-00-586-6655
Grinding-Buffing-Wire Brush Wheel Arbor

005866655
U2206: RNCC: 3 | RNVC: 2

28 Dec 1974

3460-00-679-3924
Hold Down Machine Clamp

006793924
8422263: RNCC: 3 | RNVC: 2
201: RNCC: 5 | RNVC: 9

1 Jan 1963

3460-00-740-4135
Abrasive Wheel

007404135
B74.2: RNCC: 3 | RNVC: 1
B74.13: RNCC: 5 | RNVC: 1
MIL-W-17929: RNCC: 5 | RNVC: 9

1 Jan 1961

3460-00-882-1228
Abrasive Wheel

008821228
B74.2 7X1X5/8: RNCC: 3 | RNVC: 1
B7.1: RNCC: 5 | RNVC: 1
B74.13 A36OV: RNCC: 5 | RNVC: 1
A36-O5VBE: RNCC: 5 | RNVC: 1
A36-O5VBE/TY1 7 X 5/8 X 1: RNCC: 5 | RNVC: 2
MIL-W-17929: RNCC: 5 | RNVC: 9

1 Jan 1962

3460-00-932-9770
Drivers Hatch Chuck

009329770
10888687: RNCC: 3 | RNVC: 2

20 Feb 1967

3460-01-037-1846
Spring Mandrel

010371846
0113357-01: RNCC: 3 | RNVC: 2
0113357-01: RNCC: 3 | RNVC: 9

14 Mar 1977

3460-01-098-6877
Drill Chuck

010986877
1442 W/KEY: RNCC: 3 | RNVC: 2
R3-2W/KEY: RNCC: 5 | RNVC: 9
02065: RNCC: 5 | RNVC: 9
6A-2A: RNCC: 5 | RNVC: 9

6 Aug 1980

3460-01-102-9973
Abrasive Wheel

011029973
B742 TY1 D 3 X T 1/32 X 3/8: RNCC: 3 | RNVC: 1
A60-OBNA2 TY1 3X0.356X3/8: RNCC: 3 | RNVC: 2
B74.13: RNCC: 5 | RNVC: 1
B7.1: RNCC: 5 | RNVC: 1
P8381405: RNCC: 5 | RNVC: 9
E1269087: RNCC: 5 | RNVC: 9
B74.2 TY1 3X0.035X3/8: RNCC: 5 | RNVC: 9

1 Nov 1980

3460-01-193-8966
Cutting Tool Holder

011938966
B212.3 MCLNR-16-4-C: RNCC: 3 | RNVC: 1
DCLNR-164C: RNCC: 3 | RNVC: 2
DCLNR-164C: RNCC: 5 | RNVC: 9

8 Nov 1984

3460-01-276-5070
Lathe Center

012765070
CE3901: RNCC: 3 | RNVC: 2

9 Apr 1988

3460-01-311-3497
Aircraft Structural Component Support

013113497
TD761G-32024: RNCC: 3 | RNVC: 2
RE168110002-426: RNCC: 5 | RNVC: 9
RE168110002: RNCC: D | RNVC: 9

23 Nov 1989

3460-01-308-5116
Hold Down Machine Clamp

013085116
3997-1: RNCC: 3 | RNVC: 2

29 Sep 1989

3460-01-352-2901
Abrasive Wheel

013522901
10-4210-010: RNCC: 3 | RNVC: 2

23 Jan 1992

3460-01-360-2583
Grinding-Buffing-Wire Brush Wheel Arbor

013602583
07724: RNCC: 3 | RNVC: 2
07724: RNCC: 3 | RNVC: 9

20 Jun 1992

3460-01-418-7764
Cutting Tool Holder

014187764
903-5912049PC1A: RNCC: 3 | RNVC: 1

6 Sep 1995

3460-01-436-7356
Expansion Mandrel Sleeve

014367356
CBS-12-1-N-16F: RNCC: 3 | RNVC: 1
CBS-12-1-N-16F: RNCC: 3 | RNVC: 2
ST5300-CBS: RNCC: D | RNVC: 9

26 Sep 1996

3460-01-436-7359
Expansion Mandrel Sleeve

014367359
CBS-16-0-N-16F: RNCC: 3 | RNVC: 2
CBS-16-0-N-16F: RNCC: 3 | RNVC: 2
ST5300-CBS: RNCC: D | RNVC: 9

26 Sep 1996

3460-01-437-5478
Abrasive Wheel

014375478
R-774-0214: RNCC: 3 | RNVC: 2
R-774-0214: RNCC: 5 | RNVC: 9

17 Oct 1996

3460-01-437-5584
Abrasive Wheel

014375584
R-774-0171: RNCC: 3 | RNVC: 2
R-774-0171: RNCC: 5 | RNVC: 9

17 Oct 1996

3460-01-437-5574
Abrasive Wheel

014375574
R-774-0173: RNCC: 3 | RNVC: 2
R-7740-0173: RNCC: 5 | RNVC: 9
R-774-0173: RNCC: 5 | RNVC: 9

17 Oct 1996

3460-01-440-4622
Dovetail Slide

014404622
903-5912047PC4: RNCC: 3 | RNVC: 2

14 Jan 1997

3460-01-441-7789
Lathe Center

014417789
SM100-205: RNCC: 3 | RNVC: 2
100-205: RNCC: C | RNVC: 1

27 Mar 2001

3460-01-502-0575
Expansion Mandrel

015020575
LBS-121: RNCC: 3 | RNVC: 2

24 Oct 2002

3460-01-504-0357
Solid Machine Mandrel

015040357
CA358023-216-T10: RNCC: 3 | RNVC: 2

16 Jan 2003

3460-01-504-3314
Expansion Mandrel Sleeve

015043314
CBS-20-3-N-32F: RNCC: 3 | RNVC: 2
CBS-20-3-N-32F: RNCC: 3 | RNVC: 2
ST5300-CBS: RNCC: D | RNVC: 9

27 Jan 2003

3460-01-504-3327
Expansion Mandrel Sleeve

015043327
CBS-12-0-N-32F: RNCC: 3 | RNVC: 2
CBS-12-0-N-32F: RNCC: 5 | RNVC: 2

27 Jan 2003

3460-01-504-3332
Expansion Mandrel Sleeve

015043332
CSS-22-2-N-32F: RNCC: 3 | RNVC: 1
CBS-22-3-N-32F: RNCC: 3 | RNVC: 2

27 Jan 2003

3460-01-522-0360
Machine Collet

015220360
124604: RNCC: 3 | RNVC: 2

15 Jul 2004

3460-01-529-2946
Lapping Plate

015292946
C5305030: RNCC: 3 | RNVC: 2

12 Apr 2005

3460-01-534-0863
Cutting Tool Holder

015340863
3212A81: RNCC: 3 | RNVC: 2

6 Oct 2005

3460-01-586-9145
Machine Collet

015869145
187-6059: RNCC: 3 | RNVC: 2

19 Jul 2010

3460-01-589-0074
Expansion Mandrel Sleeve

015890074
TD761H-6008: RNCC: 3 | RNVC: 2

14 Oct 2010

3460-01-645-5416
Counterbore Pilot

016455416
30R0165P30: RNCC: 3 | RNVC: 2
30R0165P30: RNCC: 3 | RNVC: 9
30R0165: RNCC: D | RNVC: 9

19 Jun 2015

3460-01-655-2351
Drill Chuck

016552351
CAT40-APU13: RNCC: 3 | RNVC: 2
11B5190485: RNCC: 7 | RNVC: 2

23 May 2016

3460-01-664-9015
Counterbore Holder

016649015
LSK-7706-3: RNCC: 3 | RNVC: 2

11 Jul 2017

3460-01-670-9303
Milling-Grinding-Drilling-Slotting Attachment

016709303
419-0106: RNCC: 3 | RNVC: 2

13 Mar 2018

3460-01-677-0518
Expansion Mandrel Sleeve

016770518
FTS-C17-4-0-3-8: RNCC: 3 | RNVC: 2

27 Nov 2018

3460-01-677-5994
Quick Change Chuck Adapter

016775994
523-92WHIP: RNCC: 3 | RNVC: 2
12633416: RNCC: 3 | RNVC: 2
57K9362: RNCC: D | RNVC: 9

20 Dec 2018

3460-01-498-6503
Expansion Mandrel Sleeve

014986503
FTS-3-0-3-8: RNCC: 3 | RNVC: 2

29 Jun 2002

3460-01-474-1265
Weapon Boresighting Equipment

014741265
LBS-071: RNCC: 3 | RNVC: 2
LBS-071: RNCC: 5 | RNVC: 2

25 Apr 2000

3460-01-192-3088
Cutting Tool Holder

011923088
ANSI B212.3: RNCC: 3 | RNVC: 1
MDJNR-16-4D: RNCC: 3 | RNVC: 2
DDJNR-164D: RNCC: 5 | RNVC: 2
MDJNR-16-4D: RNCC: 5 | RNVC: 9
DDJNR-164D: RNCC: 5 | RNVC: 9

19 Oct 1984

3460-01-319-2674
Boring Tool Bar

013192674
S06M STFCR-2: RNCC: 3 | RNVC: 9
S06MSTFCR2: RNCC: 5 | RNVC: 2

4 May 1990

3460-00-337-0510
Abrasive Wheel

003370510
ANSI B74.13: RNCC: 3 | RNVC: 1
ANSI B74.2: RNCC: 3 | RNVC: 1
ANSI B7.1: RNCC: 3 | RNVC: 1
B74.2 TYPE1A120KV3X1/2X1/2: RNCC: 5 | RNVC: 1
MIL-W-17929: RNCC: 5 | RNVC: 9

1 Jan 1963

3460-01-109-4772
Lathe Center

011094772
3266A3: RNCC: 3 | RNVC: 2
CE1889: RNCC: 5 | RNVC: 9
NO2MT DEAD CENT: RNCC: C | RNVC: 1

15 Mar 1981

3460-01-211-6536
Milling Cutter Arbor

012116536
10806: RNCC: 3 | RNVC: 2

28 Jun 1985

3460-00-224-8982
Expansion Mandrel

002248982
8: RNCC: 3 | RNVC: 2
A-A-55017: RNCC: 4 | RNVC: 1
00M251TYPE2STYLE2: RNCC: 5 | RNVC: 9

1 Jan 1963

3460-00-406-8643
Abrasive Round Stock

004068643
066XF: RNCC: 3 | RNVC: 2
P-06XF: RNCC: 3 | RNVC: 2

17 Apr 1970

3460-01-342-5212
Boring Tool Bar

013425212
E10NER2/KWH: RNCC: 3 | RNVC: 2
C10-FNER2: RNCC: 5 | RNVC: 2
C10-NER2: RNCC: 5 | RNVC: 9
C10-NER2: RNCC: 5 | RNVC: 9

25 Jul 1991

3460-01-192-0566
Boring Tool Bar

011920566
S16-NER3: RNCC: 3 | RNVC: 2
A16NER3: RNCC: 5 | RNVC: 2
S16FNER3: RNCC: 5 | RNVC: 2
B-2508: RNCC: 5 | RNVC: 9
S16-NER3: RNCC: 5 | RNVC: 9

16 Oct 1984

3460-01-609-0941
Lathe Dog Set

016090941
0251-0051: RNCC: 3 | RNVC: 2

16 Jul 2012

3460-01-342-1933
Boring Tool Bar

013421933
E12NER2/KWH: RNCC: 3 | RNVC: 2
C12-NER2: RNCC: 5 | RNVC: 9
C12-NER2: RNCC: 5 | RNVC: 9

16 Jul 1991

3460-01-398-8148
Boring Tool Bar

013988148
E08SCLPL2: RNCC: 3 | RNVC: 2
E08SCLPL2: RNCC: 5 | RNVC: 9

9 Nov 1994

3460-01-411-5680
Drill Chuck

014115680
01857: RNCC: 3 | RNVC: 2
6309: RNCC: 5 | RNVC: 9

28 Mar 1995

3460-01-618-3216
Bench And Machine Table Vise

016183216
59039: RNCC: 3 | RNVC: 2

19 Apr 2013

3460-00-224-8981
Expansion Mandrel

002248981
AA 55017 12: RNCC: 2 | RNVC: 2
A-A-55017: RNCC: 4 | RNVC: 1
7: RNCC: 5 | RNVC: 9
00M251TYPE2STYLE2: RNCC: 5 | RNVC: 9

1 Jan 1963

3460-01-297-0527
Boring Tool Bar

012970527
A08NER1: RNCC: 3 | RNVC: 2
S08-NER1: RNCC: 5 | RNVC: 9
S08-NER1: RNCC: 5 | RNVC: 9

28 Mar 1989

3460-01-671-2409
Hold Down Machine Clamp

016712409
12633408: RNCC: 3 | RNVC: 2

20 Mar 2018

3460-01-192-0565
Boring Tool Bar

011920565
E12STUNR3: RNCC: 3 | RNVC: 2
B-7806: RNCC: 5 | RNVC: 9
C12STUNR3: RNCC: 5 | RNVC: 9

16 Oct 1984

3460-01-193-8967
Boring Tool Bar

011938967
E08STUNR2: RNCC: 3 | RNVC: 2
C08-STUNR2: RNCC: 5 | RNVC: 9
ED8/KWH: RNCC: 5 | RNVC: 9
C08-STUNR2: RNCC: 5 | RNVC: 9
B-7704: RNCC: 5 | RNVC: 9

8 Nov 1984

3460-01-624-4671
Cutting Tool Holder

016244671
STDCR64-3D: RNCC: 3 | RNVC: 2

3 Jan 2014

3460-01-043-0245
Boring Tool Bar

010430245
S16-DTFNR3: RNCC: 3 | RNVC: 2
B3108: RNCC: 5 | RNVC: 9
B3108: RNCC: 5 | RNVC: 9
S16-DTFNR3: RNCC: 5 | RNVC: 9

19 Jun 1977

3460-01-629-6021
Machine Tool Protective Shield

016296021
220798: RNCC: 3 | RNVC: 2
11B5090952: RNCC: 7 | RNVC: 2

8 Jul 2014

3460-01-629-2714
Cutting Tool Holder

016292714
4009TRK: RNCC: 3 | RNVC: 2

24 Jun 2014

3460-01-535-6930
Machine Table Vise

015356930
465-0759: RNCC: 3 | RNVC: 2
465-0759: RNCC: 3 | RNVC: 9
201.015.123: RNCC: 5 | RNVC: 2

8 Dec 2005

3460-01-509-2318
Expansion Mandrel

015092318
LBS-135-A1: RNCC: 3 | RNVC: 2

17 Jun 2003

3460-01-509-1829
Rotary Wheel Wire Brush

015091829
61-5001-3222-2: RNCC: 3 | RNVC: 9
7100138192: RNCC: C | RNVC: 1

16 Jun 2003

NSN 3460-01-437-8021 014378021 WHEEL,ABRASIVE

3460-01-437-8021
Abrasive Wheel

014378021
B74: RNCC: 3 | RNVC: 2
B74: RNCC: 3 | RNVC: 9
00781568133095: RNCC: 5 | RNVC: 1
BA710060: RNCC: 5 | RNVC: 2
BA710060: RNCC: 5 | RNVC: 9
00781568133095: RNCC: 5 | RNVC: 9

24 Oct 1996

3460-01-419-3473
Contour Gripping Vise

014193473
12388039: RNCC: 3 | RNVC: 1
12388039: RNCC: 5 | RNVC: 2
12388039: RNCC: 5 | RNVC: 9

20 Sep 1995

3460-01-408-5139
Abrasive Wheel

014085139
64596BS: RNCC: 3 | RNVC: 2

17 Feb 1995

3460-01-394-2609
Milling Cutter Arbor

013942609
SAR40-8: RNCC: 3 | RNVC: 9

5 Aug 1994

3460-01-376-1679
Expansion Mandrel Sleeve

013761679
TD761H-3216: RNCC: 3 | RNVC: 2
TD761H-3216: RNCC: 5 | RNVC: 2

27 May 1993

3460-01-375-3820
Cutting Tool Holder

013753820
151.2-25-30: RNCC: 3 | RNVC: 9

8 May 1993

3460-01-372-3394
Positioning Table

013723394
32-111: RNCC: 3 | RNVC: 9

6 Mar 1993

3460-01-360-9192
Abrasive Wheel

013609192
8729A14: RNCC: 3 | RNVC: 2

4 Jul 1992

3460-01-359-7427
Cutting Tool Holder

013597427
PTMR1032B: RNCC: 3 | RNVC: 9
PTMR1032B: RNCC: 5 | RNVC: 2
PTMR1032: RNCC: 5 | RNVC: 9

11 Jun 1992

3460-01-350-0786
Drill Chuck Key

013500786
92960: RNCC: 3 | RNVC: 2

9 Dec 1991

3460-01-300-0787
Drill Chuck Arbor

013000787
7316: RNCC: 3 | RNVC: 2
A0304: RNCC: 5 | RNVC: 2

10 May 1989

3460-01-266-7511
Machine Collet

012667511
61016: RNCC: 3 | RNVC: 2
NAVAL REPAIR PART: RNCC: 5 | RNVC: 1

30 Oct 1987

3460-01-250-5088
Abrasive Wheel

012505088
81: RNCC: 3 | RNVC: 2

3 Mar 1987

3460-01-246-5322
Abrasive Wheel

012465322
4178A11: RNCC: 3 | RNVC: 2

14 Dec 1986

3460-01-244-2937
Abrasive Wheel

012442937
B74.2 A60KB 14X1/8X1: RNCC: 3 | RNVC: 1
B74.13: RNCC: 5 | RNVC: 1
B7.1: RNCC: 5 | RNVC: 1
4466A14: RNCC: 5 | RNVC: 2

9 Nov 1986

3460-01-212-8684
Abrasive Wheel

012128684
ANSI B74.13: RNCC: 3 | RNVC: 1
ANSI B7.1: RNCC: 3 | RNVC: 1
ANSI B74.2: RNCC: 3 | RNVC: 1
A36R-BMFC8 3IN.X1/8IN.X3/8IN.: RNCC: 3 | RNVC: 2
A36R BMFC8 3X1/8X3/8: RNCC: 3 | RNVC: 9
B74.2 3X1/8X3/8 IN.: RNCC: E | RNVC: 8

19 Jul 1985

3460-01-126-7411
Grinding-Buffing-Wire Brush Wheel Arbor

011267411
39026: RNCC: 3 | RNVC: 2

16 Feb 1982

3460-01-106-0050
Drill Chuck

011060050
33B 3/8-24: RNCC: 3 | RNVC: 2
33B: RNCC: 5 | RNVC: 1
02056: RNCC: 5 | RNVC: 9
33B 3/8-24: RNCC: 5 | RNVC: 9
R9-38: RNCC: 5 | RNVC: 9

9 Jan 1981

3460-01-048-3039
Drill Chuck

010483039
A-A-51140 CL2 STA SZ10: RNCC: 2 | RNVC: 2
A-A-51140: RNCC: 4 | RNVC: 1
2B: RNCC: 5 | RNVC: 1
GGG-C-350: RNCC: 5 | RNVC: 9
RB-38TH: RNCC: 5 | RNVC: 9
307220: RNCC: 5 | RNVC: 9

22 Sep 1977

3460-01-022-7587
Abrasive Wheel

010227587
B74.2 A46PB 6X3/4X1/2: RNCC: 3 | RNVC: 1
B7.1: RNCC: 5 | RNVC: 1
B74.13: RNCC: 5 | RNVC: 1
MILW-17929: RNCC: 5 | RNVC: 9

5 Jun 1976

3460-01-017-7487
Surface And Lapping Duplex Plate

010177487
2352A12: RNCC: 3 | RNVC: 2
607-149531: RNCC: 5 | RNVC: 9
CLMLP080801: RNCC: 5 | RNVC: 9

12 Mar 1976

3460-01-015-8422
Abrasive Wheel

010158422
B74.2: RNCC: 3 | RNVC: 1
B7.1: RNCC: 5 | RNVC: 1
B74.13: RNCC: 5 | RNVC: 1
B45-A80-T-B/N: RNCC: 5 | RNVC: 9
MIL-W-17663: RNCC: 5 | RNVC: 9

29 Jan 1976

3460-01-015-8423
Abrasive Wheel

010158423
B74.2 A80RV 7/16X3/4X1/8: RNCC: 3 | RNVC: 1
B7.1: RNCC: 5 | RNVC: 1
B74.13: RNCC: 5 | RNVC: 1
MIL-W-17663: RNCC: 5 | RNVC: 9
B51-A80-R-B/V: RNCC: 5 | RNVC: 9

29 Jan 1976

3460-01-015-8421
Abrasive Wheel

010158421
B74.2 A60TV 3/4X3/4X1/4: RNCC: 3 | RNVC: 1
B74.13: RNCC: 5 | RNVC: 1
B7.1: RNCC: 5 | RNVC: 1
A39-A60-T-B/V: RNCC: 5 | RNVC: 9
MIL-W-17663: RNCC: 5 | RNVC: 9

29 Jan 1976

3460-01-015-8424
Abrasive Wheel

010158424
B74.2: RNCC: 3 | RNVC: 1
B7.1: RNCC: 5 | RNVC: 1
B74.13: RNCC: 5 | RNVC: 1
B71-A100-R-B/V: RNCC: 5 | RNVC: 9
MIL-W-17663: RNCC: 5 | RNVC: 9

29 Jan 1976

3460-01-014-1798
Abrasive Wheel

010141798
A11-A60-T-B/V: RNCC: 2 | RNVC: 2
B7.1: RNCC: 5 | RNVC: 1
B74.13: RNCC: 5 | RNVC: 1
B74.2 7/8X2: RNCC: 5 | RNVC: 1
MIL-W-17663: RNCC: 5 | RNVC: 9

17 Dec 1975

3460-01-013-0053
Matched V-Block Set

010130053
9134-M: RNCC: 3 | RNVC: 2
9134: RNCC: 5 | RNVC: 9

21 Nov 1975

3460-01-009-0349
Abrasive Wheel

010090349
A-36-J16-FA2 3X1/16X3/8: RNCC: 3 | RNVC: 2
B74.13: RNCC: 5 | RNVC: 1
B7.1: RNCC: 5 | RNVC: 1
B74.2 TY1 A36JBF 3X1/16X3/8: RNCC: 5 | RNVC: 2

1 Sep 1975

3460-01-009-0347
Abrasive Wheel

010090347
B74.2 A24R1BF 5X1/8X3/8: RNCC: 3 | RNVC: 1
A-241R14-BZ2: RNCC: 3 | RNVC: 1
B74.13: RNCC: 5 | RNVC: 1
B7.1: RNCC: 5 | RNVC: 1
MIL-W-16102: RNCC: 5 | RNVC: 9
5X1/8X3/8 A24-R1BF: RNCC: 5 | RNVC: 9

1 Sep 1975

3460-01-007-5195
Abrasive Wheel

010075195
B74.2 C46MR 3X1/4X1/4: RNCC: 3 | RNVC: 1
304-M: RNCC: 3 | RNVC: 2
B7.1: RNCC: 5 | RNVC: 1
B74.13: RNCC: 5 | RNVC: 1

5 Aug 1975

3460-01-006-6048
Drill Chuck

010066048
33B-A1/2-20: RNCC: 3 | RNVC: 2
6B 1/2-20: RNCC: 5 | RNVC: 9

19 Jul 1975

3460-01-004-2019
Abrasive Wheel

010042019
A180-K5-BA2: RNCC: 3 | RNVC: 1
B74.2: RNCC: 3 | RNVC: 1
B122 A180-K-B: RNCC: 3 | RNVC: 2
B7.1: RNCC: 5 | RNVC: 1
B74.13: RNCC: 5 | RNVC: 1
B122-A180-K-B: RNCC: 5 | RNVC: 9
MIL-W-17663: RNCC: 5 | RNVC: 9

29 May 1975

3460-01-004-1578
Drill Chuck Arbor

010041578
A0803: RNCC: 3 | RNVC: 2
7340: RNCC: 5 | RNVC: 2
04876: RNCC: 5 | RNVC: 9

26 May 1975

3460-01-003-7874
Abrasive Wheel

010037874
B74.2: RNCC: 3 | RNVC: 1
A801-RB25B: RNCC: 3 | RNVC: 2
B7.1: RNCC: 5 | RNVC: 1
B74.13: RNCC: 5 | RNVC: 1

7 May 1975

3460-00-996-2171
Balancing Dis Arbor

009962171
LTCT456: RNCC: 3 | RNVC: 2

1 Jan 1962

3460-00-993-6599
Abrasive Wheel

009936599
C24R4V2: RNCC: 3 | RNVC: 1
B74.2: RNCC: 3 | RNVC: 1
B74.13: RNCC: 5 | RNVC: 1

1 Jan 1963

3460-00-991-0690
Drill Grinder Attachment

009910690
825: RNCC: 3 | RNVC: 2
DG825: RNCC: 5 | RNVC: 9

1 Jan 1962

3460-00-991-0691
Abrasive Wheel

009910691
ANSI B74.13: RNCC: 3 | RNVC: 1
ANSI B7.1: RNCC: 3 | RNVC: 1
ANSI B74.2: RNCC: 3 | RNVC: 1
W-73260R: RNCC: 3 | RNVC: 2
MIL-W-17929: RNCC: 5 | RNVC: 9

1 Jan 1962

NSN 3460-00-982-4644 009824644 VISE,MACHINE TABLE

3460-00-982-4644
Machine Table Vise

009824644
30: RNCC: 3 | RNVC: 9

1 Jan 1961

3460-00-980-4617
V-Block

009804617
599-749: RNCC: 3 | RNVC: 2

1 Jan 1962

3460-00-979-6870
Counterbalance

009796870
10068059: RNCC: 3 | RNVC: 2
10068059: RNCC: 5 | RNVC: 2

12 Oct 1966

3460-00-967-7652
Trun Locating Arbor

009677652
T101450: RNCC: 3 | RNVC: 2
T101450-12842: RNCC: 5 | RNVC: 9

1 Jan 1962

3460-00-337-6332
Abrasive Wheel

003376332
SX-1530-S: RNCC: 3 | RNVC: 2
K421: RNCC: 5 | RNVC: 9
109099: RNCC: D | RNVC: 9

1 Jan 1963

3460-00-337-5994
Abrasive Wheel

003375994
B74.13 A60MV: RNCC: 3 | RNVC: 1
B7.1: RNCC: 3 | RNVC: 1
B74.2 SPECIAL ZD 10X11/4X3: RNCC: 3 | RNVC: 1
A60-M5VBE: RNCC: 5 | RNVC: 9
DA60M5V10: RNCC: 5 | RNVC: 9

1 Jan 1963

3460-00-337-0509
Abrasive Wheel

003370509
ANSI B7.1: RNCC: 3 | RNVC: 1
ANSI B74.13: RNCC: 3 | RNVC: 1
ANSI B74.2: RNCC: 3 | RNVC: 1
A30-J5V: RNCC: 3 | RNVC: 1
GGG-W-290: RNCC: 5 | RNVC: 9

1 Jan 1963

3460-00-329-3295
Carr Fastener Chuck

003293295
9760: RNCC: 3 | RNVC: 9
9760: RNCC: 5 | RNVC: 9

1 Jan 1963

3460-00-322-5949
Abrasive Wheel

003225949
3148: RNCC: 3 | RNVC: 2
B74.13 A36R7V: RNCC: 5 | RNVC: 1
B74.2 TY1 6X1X1/2IN.HOLE: RNCC: 5 | RNVC: 1
MIL-W-17929: RNCC: 5 | RNVC: 9

1 Jan 1963

3460-00-322-5950
Abrasive Wheel

003225950
B74.2 TY2 C60H12V 6X1-1/8X1-1/4: RNCC: 3 | RNVC: 2
B74.13: RNCC: 5 | RNVC: 1
23-661: RNCC: 5 | RNVC: 9
1661: RNCC: 5 | RNVC: 9

1 Jan 1963

3460-00-322-5935
Abrasive Wheel

003225935
K95: RNCC: 3 | RNVC: 2
109099: RNCC: D | RNVC: 9

1 Jan 1961

3460-00-322-5930
Abrasive Wheel

003225930
K17: RNCC: 3 | RNVC: 2
109099: RNCC: D | RNVC: 9

1 Jan 1963

3460-00-274-7377
Cutting Tool Holder

002747377
A-A-51137 TY 2 ST B G-L-53: RNCC: 2 | RNVC: 2
A-A-51137: RNCC: 4 | RNVC: 1
83-419: RNCC: 5 | RNVC: 9
OO-H-581: RNCC: 5 | RNVC: 9
83-418: RNCC: 5 | RNVC: 9
3B: RNCC: 5 | RNVC: 9
83-418: RNCC: 5 | RNVC: 9
83-418: RNCC: C | RNVC: 1

1 Jan 1963

3460-00-265-7095
V-Block

002657095
CGSB 39-GP-38: RNCC: 3 | RNVC: 1
CGSB 39-GP-38A TY 4 TABLE 10: RNCC: 5 | RNVC: 2
GGGV191: RNCC: 5 | RNVC: 9
A-A-51150 TY 4 ST A GR A: RNCC: 5 | RNVC: 9

1 Jan 1963

3460-00-264-5535
Toolmaker's Parallel Clamp

002645535
599-754-12: RNCC: 3 | RNVC: 2
161B: RNCC: 5 | RNVC: 2
910C: RNCC: 5 | RNVC: 2
910C: RNCC: 5 | RNVC: 9
GGG-C-406: RNCC: 5 | RNVC: 9
GGG-C-406: RNCC: 5 | RNVC: 9

1 Jan 1963

3460-00-263-2930
Boring Tool Bar

002632930
CE3860: RNCC: 3 | RNVC: 2
564-9102-938487PC3856C: RNCC: 5 | RNVC: 1
83-539: RNCC: 5 | RNVC: 2
2978-08PC3856C: RNCC: 5 | RNVC: 9
8144: RNCC: 5 | RNVC: 9
83-539: RNCC: 5 | RNVC: 9
83-539: RNCC: 5 | RNVC: 9

1 Jan 1963

3460-00-256-7337
V-Block

002567337
A-A-51150 TY 1 SZ 2 ST C GR A: RNCC: 2 | RNVC: 2
A-A-51150: RNCC: 4 | RNVC: 1
9131: RNCC: 5 | RNVC: 1
GGGV191: RNCC: 5 | RNVC: 9

1 Jan 1963

3460-00-243-1954
Lathe Dog

002431954
89-341: RNCC: 3 | RNVC: 2
89-341: RNCC: 3 | RNVC: 9
OO-D-565: RNCC: 5 | RNVC: 9
89-341: RNCC: 5 | RNVC: 9
A-A-50961 TY1 CLB ST1: RNCC: 5 | RNVC: 9
1H: RNCC: 5 | RNVC: 9

1 Jan 1963

3460-00-237-8696
Center Tester

002378696
599-795: RNCC: 3 | RNVC: 2
389-4: RNCC: 3 | RNVC: 2

1 Jan 1963

3460-00-234-3792
Abrasive Wheel

002343792
A46-R8-BRF: RNCC: 3 | RNVC: 1
B74.2TY1 A46R8BF 3X1/16X1/4: RNCC: 3 | RNVC: 2
B74.1: RNCC: 5 | RNVC: 1
B74.13: RNCC: 5 | RNVC: 1

27 May 1973

3460-00-234-2337
Cutting Tool Holder

002342337
AA51136-100: RNCC: 2 | RNVC: 2
A-A-51136: RNCC: 4 | RNVC: 1
A-A-51136 TY1: RNCC: 5 | RNVC: 1
83-623: RNCC: 5 | RNVC: 1
83-623: RNCC: 5 | RNVC: 9
83-623: RNCC: 5 | RNVC: 9
OO-H-581: RNCC: 5 | RNVC: 9
50: RNCC: 5 | RNVC: 9

1 Jan 1963

3460-00-233-7991
Counterbore Pilot

002337991
P-57: RNCC: 3 | RNVC: 2
P57: RNCC: 5 | RNVC: 9

1 Jan 1963

3460-00-233-7977
Counterbore Pilot

002337977
P33: RNCC: 3 | RNVC: 9
P-33: RNCC: 5 | RNVC: 2

1 Jan 1963

3460-00-233-7966
Counterbore Pilot

002337966
P12: RNCC: 3 | RNVC: 2
P12: RNCC: 5 | RNVC: 9
P12: RNCC: 5 | RNVC: 9

1 Jan 1963

3460-00-232-9775
Cutting Tool Holder

002329775
A-A-50965TY3CL1STYLE A,NO.C-S-11: RNCC: 3 | RNVC: 2
A-A-50965: RNCC: 4 | RNVC: 1
00H581TYPE3CLASS1STYLEASIZECS11: RNCC: 5 | RNVC: 9

1 Jan 1963

3460-00-231-2258
Drill Chuck

002312258
A-A-51140 CL1 STC SZ7: RNCC: 2 | RNVC: 2
GGG-C-350: RNCC: 5 | RNVC: 9

1 Jan 1963

3460-00-230-7525
Abrasive Wheel

002307525
BD-1545-GP: RNCC: 3 | RNVC: 2
57043: RNCC: 5 | RNVC: 9

1 Jan 1963

3460-00-230-4126
Abrasive Wheel

002304126
B74.2 TY1: RNCC: 3 | RNVC: 1
B74.13: RNCC: 5 | RNVC: 1
MIL-W-17929: RNCC: 5 | RNVC: 9

1 Jan 1963

3460-00-227-7524
Taper Shank Tool Socket

002277524
AA51132-115C: RNCC: 2 | RNVC: 2
A-A-51132: RNCC: 4 | RNVC: 1
00S550: RNCC: 5 | RNVC: 9
6013X2: RNCC: 5 | RNVC: 9

1 Jan 1963

3460-00-227-7511
Taper Shank Tool Socket

002277511
A-A-51132 TY 2 CL 1 SIZE 10: RNCC: 3 | RNVC: 2
A-A-51132: RNCC: 4 | RNVC: 1
OO-S-550: RNCC: 5 | RNVC: 9

1 Jan 1963

3460-00-224-9283
Hold Down Machine Clamp

002249283
79-474: RNCC: 3 | RNVC: 2
79-474: RNCC: 3 | RNVC: 9
74: RNCC: 5 | RNVC: 9
79-474: RNCC: 5 | RNVC: 9

1 Jan 1963

3460-00-224-8989
Expansion Mandrel

002248989
AA55017-10: RNCC: 2 | RNVC: 2
AA55017: RNCC: 4 | RNVC: 1
A-A-51129 TY 2 SIZE 10: RNCC: 5 | RNVC: 9
AA51129-10: RNCC: 5 | RNVC: 9
OO-M-251: RNCC: 5 | RNVC: 9
A-A-51129: RNCC: 5 | RNVC: 9

1 Jan 1963

3460-00-224-8641
Taper Shank Tool Socket

002248641
A-A-51191 TYPE A 1 B 5: RNCC: 2 | RNVC: 2
A-A-51191: RNCC: 4 | RNVC: 1
A-A-51132 TY 3 CL 3 SIZE 4: RNCC: 5 | RNVC: 9
OO-S-550: RNCC: 5 | RNVC: 9

1 Jan 1963

3460-00-189-9106
Cutting Tool Holder

001899106
08647026: RNCC: 3 | RNVC: 2
OO-H-581: RNCC: 5 | RNVC: 9
A-A-51139 TY2 CL2 ST A NO.B-S-10: RNCC: 5 | RNVC: 9
A-A-51139 TY2 CL2 STA NO. B-L-20: RNCC: 5 | RNVC: 9
A-A-51139: RNCC: 5 | RNVC: 9

1 Jan 1963

3460-00-189-4624
Drill Chuck

001894624
AA51140-2A27: RNCC: 2 | RNVC: 2
A-A-51140: RNCC: 4 | RNVC: 1
GGG-C-350 TY1CL2: RNCC: 5 | RNVC: 1
23230: RNCC: 5 | RNVC: 1
33B1-2-20: RNCC: 5 | RNVC: 1
33B3364: RNCC: 5 | RNVC: 1
GGG-C-350: RNCC: 5 | RNVC: 9

1 Jan 1963

3460-00-187-8707
Abrasive Wheel

001878707
B74.2: RNCC: 3 | RNVC: 1
B74.13: RNCC: 5 | RNVC: 1
MIL-W-17929: RNCC: 5 | RNVC: 9

1 Jan 1963

3460-00-187-8682
Abrasive Wheel

001878682
ANSI B7.1: RNCC: 3 | RNVC: 1
ANSI B74.13: RNCC: 3 | RNVC: 1
ANSI B74.2: RNCC: 3 | RNVC: 1
GGG-W-290: RNCC: 5 | RNVC: 9

1 Jan 1963

3460-00-187-8673
Abrasive Wheel

001878673
GGG-W-290: RNCC: 4 | RNVC: 1
A30-J8V: RNCC: E | RNVC: 8
B74.13: RNCC: E | RNVC: 8
B74.2 TY11 A30J8V 5X3X7/8: RNCC: E | RNVC: 8

1 Jan 1963

3460-00-168-2136
Collet Chuck

001682136
3000-6606: RNCC: 3 | RNVC: 2
4005-0002: RNCC: 5 | RNVC: 9
4005-0002: RNCC: 5 | RNVC: 9
SP15-2: RNCC: 5 | RNVC: 9
3000-6606: RNCC: 5 | RNVC: 9

26 Jun 1968

3460-00-156-3133
Wheel Dressing Diamond Nib

001563133
710: RNCC: 3 | RNVC: 2
CD-1019-D: RNCC: 3 | RNVC: 2
1715B: RNCC: 3 | RNVC: 2
1715: RNCC: C | RNVC: 1

1 Jan 1960

3460-00-144-2049
Drill Chuck Key

001442049
K5: RNCC: 3 | RNVC: 2

1 Jan 1963

3460-00-109-4423
Abrasive Wheel

001094423
B74.13: RNCC: 3 | RNVC: 1
B74.2 TY6: RNCC: 3 | RNVC: 1
B7.1: RNCC: 5 | RNVC: 1
MIL-W-17929: RNCC: 5 | RNVC: 9
102845: RNCC: 5 | RNVC: 9

2 Aug 1968

3460-00-060-7385
Abrasive Wheel

000607385
32A46H8VBE: RNCC: 3 | RNVC: 1
25A46I5VS: RNCC: E | RNVC: 8
B74.2TY1 A46I5V 7X1/21-1/4: RNCC: E | RNVC: 8
25A46I5VS/7 X 1/2 X 1 1/4: RNCC: E | RNVC: 8
B7.1: RNCC: E | RNVC: 8
B74.13: RNCC: E | RNVC: 8

1 Jan 1963

3460-00-060-7358
Abrasive Wheel

000607358
A60M5VBE: RNCC: 3 | RNVC: 1
B74.13: RNCC: 5 | RNVC: 1
B74.2 TY1 A60M5V 12X2X1-1/4: RNCC: 5 | RNVC: 2

1 Jan 1963

3460-00-056-8420
Rock Drill Chuck

000568420
50D475: RNCC: 3 | RNVC: 2
50D475: RNCC: 5 | RNVC: 9

30 May 1967

3460-00-049-4282
Collet

000494282
280-22-1E: RNCC: 3 | RNVC: 9

1 Jan 1963

NSN 3460-00-018-6100 000186100 PLATE,LAPPING

3460-00-018-6100
Lapping Plate

000186100
RL184: RNCC: 3 | RNVC: 2
2237A1: RNCC: 5 | RNVC: 2
607-149564: RNCC: 5 | RNVC: 2
RLS184: RNCC: 5 | RNVC: 9

27 Apr 1967

3460-00-003-7100
Hold Down Machine Clamp

000037100
CL101TC: RNCC: 3 | RNVC: 2

27 May 1972

3460-01-433-4589
Lathe Center

014334589
10365: RNCC: 3 | RNVC: 9

29 Jun 1996

3460-01-392-1509
Cutting Tool Holder

013921509
DS-3: RNCC: 3 | RNVC: 9

24 Jun 1994

3460-01-302-4243
Lapping Plate

013024243
0439004: RNCC: 3 | RNVC: 2

14 Jun 1989

3460-01-144-7152
Hold Down Machine Clamp

011447152
424-AL: RNCC: 3 | RNVC: 9

27 Dec 1982

3460-01-093-0129
V-Block

010930129
9130: RNCC: 3 | RNVC: 2
9130: RNCC: 5 | RNVC: 9

8 Apr 1980

3460-01-051-1327
Collet And Drill

010511327
MB-20327-1 AND MB12062-1: RNCC: 3 | RNVC: 2
MB-20327-1: RNCC: 5 | RNVC: 9
20327: RNCC: 5 | RNVC: 9

22 Nov 1977

3460-00-678-8513
Abrasive Wheel

006788513
BD2033R: RNCC: 3 | RNVC: 2
BD-1545-GP: RNCC: 5 | RNVC: 2
50684: RNCC: 5 | RNVC: 2
BD2033: RNCC: 5 | RNVC: 9

1 Jan 1961

3460-00-603-9281
Abrasive Wheel

006039281
BD2009R: RNCC: 3 | RNVC: 2
BD-1145-GP: RNCC: 5 | RNVC: 2
50680: RNCC: 5 | RNVC: 9
BD2009: RNCC: 5 | RNVC: 9

1 Jan 1961

3460-00-603-9260
Abrasive Wheel

006039260
BD2039R: RNCC: 3 | RNVC: 2
BD-1645-GP: RNCC: 5 | RNVC: 2
50685: RNCC: 5 | RNVC: 9
BD2039: RNCC: 5 | RNVC: 9

1 Jan 1961

3460-00-603-9205
Abrasive Wheel

006039205
BD-1245-GP: RNCC: 3 | RNVC: 2
50681: RNCC: 5 | RNVC: 2
WG690: RNCC: 5 | RNVC: 9
BD2015: RNCC: 5 | RNVC: 9
14382: RNCC: 5 | RNVC: 9

1 Jan 1961

3460-00-603-9143
Abrasive Wheel

006039143
K-425-WS AND 47-BD: RNCC: 3 | RNVC: 2
50665: RNCC: 5 | RNVC: 9

1 Jan 1961

3460-00-603-9144
Abrasive Wheel

006039144
50667: RNCC: 3 | RNVC: 9
BD-1330-GP: RNCC: 5 | RNVC: 2

1 Jan 1961

3460-00-603-9142
Abrasive Wheel

006039142
BD2107R: RNCC: 3 | RNVC: 2
50663: RNCC: 5 | RNVC: 2
BD-1430-GP: RNCC: 5 | RNVC: 2
BD2026: RNCC: 5 | RNVC: 9

1 Jan 1961

3460-00-603-9140
Abrasive Wheel

006039140
50661: RNCC: 3 | RNVC: 2

1 Jan 1961

3460-00-603-9006
Abrasive Wheel

006039006
BD1315GP: RNCC: 3 | RNVC: 2
50644: RNCC: 5 | RNVC: 9

1 Jan 1961

3460-00-201-3867
Abrasive Wheel

002013867
32A80K8VGME19237: RNCC: 3 | RNVC: 1
B74.13: RNCC: 5 | RNVC: 1
B74.1: RNCC: 5 | RNVC: 1
B74.2 TY11A80K8V 4X3X1-1/4: RNCC: 5 | RNVC: 2
32A80-K8VG: RNCC: 5 | RNVC: 9

8 Apr 1973

3460-01-608-0259
Taper Shank Tool Socket

016080259
PA12651873: RNCC: 3 | RNVC: 2
PA12651873: RNCC: 3 | RNVC: 9

20 Jun 2012

3460-00-795-0543
Machine Table Vise

007950543
3SV: RNCC: 3 | RNVC: 2
10384647: RNCC: 5 | RNVC: 2

1 Jan 1962

3460-01-459-7394
Machine Cleaning Wiper

014597394
23 1/2-5164-73: RNCC: 3 | RNVC: 2

14 Oct 1998

3460-01-688-1825
Solid Machine Mandrel

016881825
FT1033-11: RNCC: 3 | RNVC: 2

6 May 2020

3460-01-326-0404
Lapping Plate

013260404
2238A1: RNCC: 3 | RNVC: 2
2238A2: RNCC: 5 | RNVC: 9

16 Sep 1990

NSN 3460-00-322-5934 003225934 WHEEL,ABRASIVE

3460-00-322-5934
Abrasive Wheel

003225934
SXF39: RNCC: 3 | RNVC: 2
K25: RNCC: 5 | RNVC: 9
109099: RNCC: D | RNVC: 9

1 Jan 1961

3460-01-130-1855
Abrasive Wheel

011301855
A80-IBF TY1 2X1/4X1/4: RNCC: 3 | RNVC: 2
A80-IBF: RNCC: 5 | RNVC: 1
B74.13: RNCC: 5 | RNVC: 1
B74.2 A80IBF TY1 2X1/4X1/4: RNCC: 5 | RNVC: 2

17 Apr 1982

3460-01-437-5463
Wheel Dressing Diamond Nib

014375463
32-110: RNCC: 3 | RNVC: 2
32-110: RNCC: 5 | RNVC: 9

17 Oct 1996

3460-01-504-0297
Air Back Up Mandrel

015040297
CA358027-216S: RNCC: 3 | RNVC: 2

16 Jan 2003

3460-01-630-8595
Drill Chuck

016308595
R22W-151: RNCC: 3 | RNVC: 2
R22W-151: RNCC: 5 | RNVC: 9

20 Aug 2014

3460-01-504-0301
Air Back Up Mandrel

015040301
CA358027-216L: RNCC: 3 | RNVC: 2

16 Jan 2003

3460-01-550-7519
Collet Chuck

015507519
020272: RNCC: 3 | RNVC: 2
020272: RNCC: 5 | RNVC: 2

27 Apr 2007

3460-01-630-8485
Taper Shank Tool Socket

016308485
DE-323A-2: RNCC: 3 | RNVC: 2
DE-323A-2: RNCC: 5 | RNVC: 9

20 Aug 2014

3460-01-504-0299
Solid Machine Mandrel

015040299
CA358015-216-T12: RNCC: 3 | RNVC: 2

16 Jan 2003

3460-01-208-9633
Abrasive Wheel

012089633
WD-3: RNCC: 3 | RNVC: 9

21 May 1985

3460-01-010-8542
Stud Remover And Setter Collett

010108542
CG511: RNCC: 3 | RNVC: 2
CG511C2128: RNCC: 5 | RNVC: 9

8 Oct 1975

3460-01-381-0438
Boring Bar Tool Kit

013810438
212-A: RNCC: 3 | RNVC: 2
212-A: RNCC: 5 | RNVC: 2

5 Oct 1993

3460-01-672-9814
Jaw Clamp Insert Set

016729814
84646071: RNCC: 3 | RNVC: 2

24 May 2018

3460-01-663-2199
Abrasive Wheel

016632199
66252843223: RNCC: 3 | RNVC: 2
11B5091630: RNCC: 7 | RNVC: 2

2 May 2017

3460-01-663-0887
Hold Down Machine Clamp

016630887
307-U: RNCC: 3 | RNVC: 9
5370-010: RNCC: 5 | RNVC: 2

26 Apr 2017

3460-01-659-4930
Shell End Mill Arbor

016594930
43501: RNCC: 3 | RNVC: 2

30 Nov 2016

3460-01-657-5882
Abrasive Wheel

016575882
542751500: RNCC: 3 | RNVC: 2

22 Aug 2016

3460-01-649-3280
Lathe Center

016493280
84641013: RNCC: 3 | RNVC: 2

26 Oct 2015

3460-01-649-1571
Contour Gripping Vise

016491571
84641098: RNCC: 3 | RNVC: 2

21 Oct 2015

3460-01-649-1573
Lathe Steady Rest

016491573
84641099: RNCC: 3 | RNVC: 2

21 Oct 2015

3460-01-649-1572
Positioning Table

016491572
84641027: RNCC: 3 | RNVC: 2

21 Oct 2015

3460-01-648-8372
V-Block

016488372
84646100: RNCC: 3 | RNVC: 2

8 Oct 2015

3460-01-647-9312
Lathe Centering Chuck

016479312
84641097: RNCC: 3 | RNVC: 2

8 Sep 2015

3460-01-647-9280
Collet Chuck

016479280
84641064: RNCC: 3 | RNVC: 2

8 Sep 2015

3460-01-645-5413
Counterbore Pilot

016455413
30R0165P28: RNCC: 3 | RNVC: 2
30R0165P28: RNCC: 3 | RNVC: 9
30R0165: RNCC: D | RNVC: 9

19 Jun 2015

3460-01-633-4392
Machine Collet

016334392
901-092-324-113: RNCC: 3 | RNVC: 2
901-092-324: RNCC: D | RNVC: 9

21 Nov 2014

3460-01-625-8762
Machine Collet

016258762
901-092-324-101: RNCC: 3 | RNVC: 2

19 Feb 2014

3460-01-625-3936
Straight Shank Tool Socket

016253936
901-220-964-133: RNCC: 3 | RNVC: 2

3 Feb 2014

3460-01-610-2844
Quick Change Chuck Adapter

016102844
1566328: RNCC: 3 | RNVC: 2

14 Aug 2012

3460-01-608-7048
Straight Shank Tool Socket

016087048
G611632-1: RNCC: 3 | RNVC: 2

9 Jul 2012

3460-01-595-5198
Collet Chuck

015955198
FTSL-5-0-1-A: RNCC: 3 | RNVC: 2

29 Apr 2011

3460-01-588-8247
Abrasive Wheel

015888247
PE2900: RNCC: 3 | RNVC: 2

6 Oct 2010

3460-01-588-8245
Abrasive Wheel

015888245
PE2899: RNCC: 3 | RNVC: 2

6 Oct 2010

3460-01-555-3560
Machine Collet

015553560
A3207522: RNCC: 3 | RNVC: 2

4 Sep 2007

3460-01-544-1378
Vertical Jack

015441378
EW-08057-10: RNCC: 3 | RNVC: 2

3 Oct 2006

3460-01-535-2895
Quick Change Chuck Adapter

015352895
217-3192: RNCC: 3 | RNVC: 2

22 Nov 2005

3460-01-527-0227
Countersink Holder

015270227
1187-570: RNCC: 3 | RNVC: 2

14 Jan 2005

3460-01-693-6558
Counterbore Holder

016936558
29-TB1PT35A: RNCC: 3 | RNVC: 2
29-TB1PT35A: RNCC: 5 | RNVC: 2

25 Feb 2021

3460-01-524-5653
Abrasive Wheel

015245653
522418: RNCC: 3 | RNVC: 2

7 Oct 2004

3460-01-509-3346
V-Block

015093346
901-201-007-113: RNCC: 3 | RNVC: 2

19 Jun 2003

3460-01-504-0311
Solid Machine Mandrel

015040311
CA358021-216XL-T11: RNCC: 3 | RNVC: 2

16 Jan 2003

3460-01-504-0306
Solid Machine Mandrel

015040306
CA358021-216XL-T10: RNCC: 3 | RNVC: 2

16 Jan 2003

3460-01-504-0303
Solid Machine Mandrel

015040303
CA358021-216L-T11: RNCC: 3 | RNVC: 2

16 Jan 2003

3460-01-504-0298
Solid Machine Mandrel

015040298
CA358016-4-3: RNCC: 3 | RNVC: 2

16 Jan 2003

3460-01-504-0284
Solid Machine Mandrel

015040284
CA358021-216S-T11: RNCC: 3 | RNVC: 2

16 Jan 2003

3460-01-496-3092
Shell End Mill Arbor

014963092
1C7195P08: RNCC: 3 | RNVC: 2
1C7195: RNCC: D | RNVC: 9

10 Apr 2002

3460-01-495-9837
Cotter

014959837
3142W003: RNCC: 3 | RNVC: 9
3142W003: RNCC: 5 | RNVC: 2
3142W003: RNCC: 5 | RNVC: 2

29 Mar 2002

3460-01-495-2895
V-Block

014952895
12987605: RNCC: 3 | RNVC: 2

12 Mar 2002

3460-01-626-5004
Rotary Wheel Fiber Brush

016265004
09717: RNCC: 3 | RNVC: 9
09717: RNCC: 5 | RNVC: 9

12 Mar 2014

3460-01-626-4995
Rotary Wheel Fiber Brush

016264995
09729: RNCC: 3 | RNVC: 9
09729: RNCC: 5 | RNVC: 9

12 Mar 2014

3460-01-607-8441
Machinist's Parallel Clamp

016078441
9352M41P04: RNCC: 3 | RNVC: 2
9352M41P04: RNCC: 5 | RNVC: 2

15 Jun 2012

3460-01-454-2323
Quick Change Chuck Adapter

014542323
POWER CHUCK: RNCC: 3 | RNVC: 2

24 Mar 1998

3460-01-441-6931
Machine Table Vise Jaw

014416931
ML35: RNCC: 3 | RNVC: 2
ML35: RNCC: 3 | RNVC: 9

20 Feb 1997

3460-01-440-2629
Boring Head

014402629
3176A59: RNCC: 3 | RNVC: 2

9 Jan 1997

NSN 3460-01-438-6033 014386033 MANDREL,MACHINE,SOLID

3460-01-438-6033
Solid Machine Mandrel

014386033
7000045771: RNCC: 3 | RNVC: 2
051144-45119: RNCC: 3 | RNVC: 9
051144-45119: RNCC: 5 | RNVC: 9

13 Nov 1996

3460-01-437-8615
Abrasive Wheel

014378615
R774-0029: RNCC: 3 | RNVC: 2

24 Oct 1996

3460-01-437-8608
Abrasive Wheel

014378608
R774-0074: RNCC: 3 | RNVC: 2

24 Oct 1996

3460-01-437-8408
Abrasive Wheel

014378408
R774-0110: RNCC: 3 | RNVC: 2

24 Oct 1996

3460-01-433-6557
Automatic Feed Facing Head

014336557
B3043: RNCC: 3 | RNVC: 2

8 Jul 1996

3460-01-433-6429
Automatic Feed Facing Head

014336429
B942: RNCC: 3 | RNVC: 2

6 Jul 1996

3460-01-433-0568
Cut Off Wheel

014330568
40000044: RNCC: 3 | RNVC: 2

20 Jun 1996

3460-01-433-0460
Lathe Dog

014330460
SE52150: RNCC: 3 | RNVC: 2
SE52150: RNCC: 5 | RNVC: 9

20 Jun 1996

3460-01-433-0215
Cutting Tool Holder

014330215
NVLCL-163D: RNCC: 3 | RNVC: 2

19 Jun 1996

3460-01-424-1587
Connector Nut

014241587
FT1013-3-157: RNCC: 3 | RNVC: 2
MNL FT1013-500 PG8 IT44: RNCC: 5 | RNVC: 1

22 Jan 1996

3460-01-420-0305
Cutting Tool Holder

014200305
ST0011710: RNCC: 3 | RNVC: 9
ST 0011710: RNCC: 5 | RNVC: 2

5 Oct 1995

3460-01-420-0307
Cutting Tool Holder

014200307
ST0011711: RNCC: 3 | RNVC: 9

5 Oct 1995

3460-01-418-7967
Rotary Wheel Wire Brush

014187967
957-22257: RNCC: 3 | RNVC: 2

6 Sep 1995

3460-01-417-6037
Drill Chuck

014176037
JKP 130-J6 P/N 9684: RNCC: 3 | RNVC: 2
63003325: RNCC: 5 | RNVC: 2
JKP 130-J6: RNCC: 5 | RNVC: 2
130-J6: RNCC: 5 | RNVC: 9

10 Aug 1995

3460-01-415-4139
Drill Chuck

014154139
34-02: RNCC: 3 | RNVC: 2

27 Jun 1995

3460-01-411-0407
Boring Tool Bar

014110407
A06-SCLPL2: RNCC: 3 | RNVC: 2
A06-SCLPL2: RNCC: 5 | RNVC: 9

16 Mar 1995

3460-01-411-0404
Boring Tool Bar

014110404
A12-SCLPL3: RNCC: 3 | RNVC: 2
A12-SCLPL3: RNCC: 5 | RNVC: 9

16 Mar 1995

3460-01-411-0403
Boring Tool Bar

014110403
A10-SCLPL3: RNCC: 3 | RNVC: 2
A10-SCLPL3: RNCC: 5 | RNVC: 9

16 Mar 1995

3460-01-406-2082
Boring Tool Bar

014062082
MCCLHOL5105: RNCC: 3 | RNVC: 9

23 Dec 1994

3460-01-399-4140
Cutting Tool Holder

013994140
S-VMSP-100R-90CCC: RNCC: 3 | RNVC: 9
S-VMSP-100R-90CCC: RNCC: 5 | RNVC: 2

24 Nov 1994

3460-01-397-7479
Cutting Tool Holder

013977479
72626: RNCC: 3 | RNVC: 2

19 Oct 1994

3460-01-397-0452
Solid Machine Mandrel

013970452
12212: RNCC: 3 | RNVC: 2

30 Sep 1994

3460-01-388-3913
Expansion Mandrel Sleeve

013883913
CBS-6-2-N-32F: RNCC: 3 | RNVC: 2
CBS-6-2-N-32F: RNCC: 3 | RNVC: 2
ST5300-CBS: RNCC: D | RNVC: 9

29 Mar 1994

3460-01-387-4571
Drill Chuck

013874571
92962: RNCC: 3 | RNVC: 2

5 Mar 1994

3460-01-386-9418
Buffing Wheel

013869418
69-3102: RNCC: 3 | RNVC: 2

19 Feb 1994

3460-01-386-8916
Counterbore Pilot

013868916
46585: RNCC: 3 | RNVC: 2
46585: RNCC: 5 | RNVC: 9

18 Feb 1994

3460-01-377-8028
Solid Machine Mandrel Set

013778028
92004A6050: RNCC: 3 | RNVC: 2
92004A6050: RNCC: 5 | RNVC: 2

28 Jul 1993

3460-01-372-2593
Boring Tool Bar

013722593
218-122: RNCC: 3 | RNVC: 9

4 Mar 1993

3460-01-372-1150
Hold Down Machine Clamp

013721150
5006A2: RNCC: 3 | RNVC: 2

3 Mar 1993

3460-01-369-2491
Taper Shank Tool Socket

013692491
60653: RNCC: 3 | RNVC: 2

18 Dec 1992

3460-01-369-2413
Boring Head

013692413
H24-DCLNL4W: RNCC: 3 | RNVC: 2
H24-DCLNL4W: RNCC: 5 | RNVC: 9

18 Dec 1992

3460-01-365-9417
Abrasive Wheel

013659417
UPC 66252836137: RNCC: 3 | RNVC: 2
A1174952 A24-P: RNCC: 5 | RNVC: 9

19 Oct 1992

3460-01-365-8310
Cutting Tool Holder

013658310
LTMR-8: RNCC: 3 | RNVC: 9
LTMR-8: RNCC: 5 | RNVC: 2
LTMR-8: RNCC: 5 | RNVC: 9

15 Oct 1992

3460-01-365-2589
Quick Change Chuck Adapter

013652589
5762095: RNCC: 3 | RNVC: 2

4 Oct 1992

3460-01-364-1699
Drill Chuck

013641699
5762096: RNCC: 3 | RNVC: 2

12 Sep 1992

3460-01-363-7572
Independent Jaw Chuck

013637572
5762069: RNCC: 3 | RNVC: 2

4 Sep 1992

3460-01-361-7599
Cutting Tool Holder

013617599
SDJOR-8-3: RNCC: 3 | RNVC: 2

24 Jul 1992

3460-01-361-6001
Cutting Tool Holder

013616001
SDNCN8-3JX: RNCC: 3 | RNVC: 2
SDP0N8-3: RNCC: 5 | RNVC: 2

21 Jul 1992

3460-01-361-6003
Boring Tool Bar

013616003
S04-KBLPL03: RNCC: 3 | RNVC: 2
S04-KBLPL03: RNCC: 5 | RNVC: 9

21 Jul 1992

3460-01-358-2071
Boring Head

013582071
H32-DTFNR4W: RNCC: 3 | RNVC: 2
H32DTFNR4W: RNCC: 5 | RNVC: 9

9 May 1992

3460-01-348-8781
Hand Notcher Stand

013488781
130-5115: RNCC: 3 | RNVC: 9
130-5115: RNCC: 5 | RNVC: 9

19 Nov 1991

3460-01-348-5581
Hold Down Machine Clamp

013485581
738469: RNCC: 3 | RNVC: 2

13 Nov 1991

3460-01-346-2214
Positioning Table

013462214
1-252-0002: RNCC: 3 | RNVC: 9
1-252-0002: RNCC: 5 | RNVC: 2

28 Sep 1991

3460-01-344-2946
Abrasive Wheel

013442946
SK79: RNCC: 3 | RNVC: 2

27 Aug 1991

3460-01-344-2923
Abrasive Wheel

013442923
SK5: RNCC: 3 | RNVC: 2

27 Aug 1991

3460-01-344-2925
Abrasive Wheel

013442925
SK3: RNCC: 3 | RNVC: 2

27 Aug 1991

3460-01-344-0901
Hold Down Machine Clamp

013440901
CA12002MS-14: RNCC: 3 | RNVC: 2
65-118538: RNCC: 5 | RNVC: 9

22 Aug 1991

3460-01-343-4080
Cutting Tool Holder

013434080
WWLNR-124: RNCC: 3 | RNVC: 9

13 Aug 1991

3460-01-343-1632
Machine Collet

013431632
J23479-30: RNCC: 3 | RNVC: 2

6 Aug 1991

3460-01-343-1476
Indexing Fixture

013431476
1-252-0005: RNCC: 3 | RNVC: 9

6 Aug 1991

3460-01-341-0646
Boring Tool Bar

013410646
NL-46: RNCC: 3 | RNVC: 2

23 Jun 1991

3460-01-340-8851
Drill Chuck

013408851
5762044: RNCC: 3 | RNVC: 2

20 Jun 1991

3460-01-339-7303
Abrasive Wheel

013397303
K-425: RNCC: 3 | RNVC: 2

28 May 1991

3460-01-339-1657
Boring Tool Bar

013391657
GTB-075: RNCC: 3 | RNVC: 9
GTB-075: RNCC: 5 | RNVC: 2

17 May 1991

3460-01-335-7513
Chuck Threaded Arbor

013357513
7346: RNCC: 3 | RNVC: 2
3170A12: RNCC: 5 | RNVC: 2

13 Mar 1991

3460-01-333-9492
Hold Down Machine Clamp

013339492
TC-215-U: RNCC: 3 | RNVC: 9
63242: RNCC: 5 | RNVC: 9

12 Feb 1991

3460-01-328-6298
Abrasive Wheel

013286298
A-10: RNCC: 3 | RNVC: 2

6 Nov 1990

3460-01-327-6322
Milling Cutter Arbor

013276322
767.060: RNCC: 3 | RNVC: 2
763.000: RNCC: 5 | RNVC: 9
763.200: RNCC: 5 | RNVC: 9
5762048: RNCC: 7 | RNVC: 2

18 Oct 1990

3460-01-327-6292
Collet Chuck

013276292
520020: RNCC: 3 | RNVC: 2
5762052: RNCC: 7 | RNVC: 2

18 Oct 1990

3460-01-327-6281
Machine Collet Set

013276281
225040 225070 225100 225130: RNCC: 3 | RNVC: 2
5762049: RNCC: 7 | RNVC: 2

18 Oct 1990

3460-01-327-6220
Abrasive Wheel

013276220
11172: RNCC: 3 | RNVC: 2
4734A669: RNCC: 5 | RNVC: 9

18 Oct 1990

3460-01-326-6840
Abrasive Wheel

013266840
38-A60-PVM-1/4X1-1/16X1/4IN: RNCC: 3 | RNVC: 9

28 Sep 1990

3460-01-326-2545
Cutting Tool Holder

013262545
151.2-16-25M: RNCC: 3 | RNVC: 9
151.21625: RNCC: 5 | RNVC: 9

21 Sep 1990

3460-01-319-5533
Indexing Fixture Plate

013195533
J35651: RNCC: 3 | RNVC: 2

10 May 1990

3460-01-318-0552
Polish-Grinding Wheel

013180552
31009: RNCC: 3 | RNVC: 9
08834131009: RNCC: 5 | RNVC: 9

11 Apr 1990

3460-01-315-7898
Cutting Tool Holder

013157898
3288A447: RNCC: 3 | RNVC: 2
3288A38: RNCC: 5 | RNVC: 2

23 Feb 1990

3460-01-315-4080
Machine Collet

013154080
22200: RNCC: 3 | RNVC: 9

15 Feb 1990

3460-01-312-2371
Cutting Tool Holder

013122371
NKLNL-121B: RNCC: 3 | RNVC: 2
NELL-121B: RNCC: 5 | RNVC: 9

12 Dec 1989

3460-01-311-2010
Tool Holder Clamp

013112010
CK-22: RNCC: 3 | RNVC: 2
CK-22: RNCC: 5 | RNVC: 9

21 Nov 1989

3460-01-309-5769
Solid Machine Mandrel

013095769
TD761G-7116: RNCC: 3 | RNVC: 2

19 Oct 1989

3460-01-308-1950
Machine Collet Set

013081950
9400043: RNCC: 3 | RNVC: 2
9400043: RNCC: 5 | RNVC: 9

23 Sep 1989

3460-01-305-0951
Drill Press Staking Tool

013050951
RT-103-9: RNCC: 3 | RNVC: 9
RST1012: RNCC: 5 | RNVC: 2

1 Aug 1989

3460-01-305-0950
Endmill Adapter

013050950
CV50-EM050-262: RNCC: 3 | RNVC: 2
CV50-EM050-262: RNCC: 5 | RNVC: 9

1 Aug 1989

3460-01-301-2206
Abrasive Wheel

013012206
B74.2 A80JV 8X1/2X1-1/4: RNCC: 3 | RNVC: 1
A104116: RNCC: 3 | RNVC: 2
WA80JV8: RNCC: 5 | RNVC: 1
B7.1: RNCC: 5 | RNVC: 1
B74.13: RNCC: 5 | RNVC: 1

25 May 1989

NSN 3460-01-300-4773 013004773 ARBOR,DRILL CHUCK

3460-01-300-4773
Drill Chuck Arbor

013004773
A0405: RNCC: 3 | RNVC: 2
7323: RNCC: 5 | RNVC: 2

14 May 1989

3460-01-300-0788
Drill Chuck Arbor

013000788
7322: RNCC: 3 | RNVC: 2
A0404: RNCC: 5 | RNVC: 1

10 May 1989

3460-01-291-7524
Hole Saw Arbor

012917524
4066A62: RNCC: 3 | RNVC: 2

5 Jan 1989

3460-01-289-1099
Boring Tool Bar

012891099
S12-KTFPR3: RNCC: 3 | RNVC: 2
S12-KTFPR3: RNCC: 5 | RNVC: 9

17 Nov 1988

3460-01-286-9112
Taper Shank Tool Socket

012869112
60212: RNCC: 3 | RNVC: 2

10 Oct 1988

3460-01-286-7455
Drill Chuck Key

012867455
65-112: RNCC: 3 | RNVC: 2

7 Oct 1988

3460-01-276-5003
Tool Sleeve Collet

012765003
5P0278: RNCC: 3 | RNVC: 2
34515: RNCC: 5 | RNVC: 2

9 Apr 1988

3460-01-273-7875
Drill Chuck

012737875
05550: RNCC: 3 | RNVC: 2
A-A-50968: RNCC: 4 | RNVC: 1

1 Mar 1988

3460-01-273-7822
Drill Chuck Arbor

012737822
A0302: RNCC: 3 | RNVC: 2

1 Mar 1988

3460-01-268-8770
Drill Chuck And Key

012688770
91123: RNCC: 3 | RNVC: 2

8 Dec 1987

3460-01-261-9818
Drill Chuck

012619818
38623: RNCC: 3 | RNVC: 2

20 Aug 1987

3460-01-260-7105
Abrasive Wheel

012607105
43000: RNCC: 3 | RNVC: 2
43000: RNCC: 5 | RNVC: 2

4 Aug 1987

3460-01-258-6424
Collet Assembly

012586424
B4-030-36: RNCC: 3 | RNVC: 2
NAVAL REPAIR PART: RNCC: 5 | RNVC: 1

5 Jul 1987

3460-01-254-9637
Lathe Fixture

012549637
003-0621: RNCC: 3 | RNVC: 2

13 May 1987

3460-01-251-9305
Abrasive Wheel

012519305
61463624438: RNCC: 3 | RNVC: 2
B82: RNCC: 3 | RNVC: 9

26 Mar 1987

3460-01-250-0177
Abrasive Wheel

012500177
B74.2 A36TB 2X1/16X3/8: RNCC: 3 | RNVC: 1
A36-T-BF2 2X1/16X3/8: RNCC: 3 | RNVC: 2
B7.1: RNCC: 5 | RNVC: 1
B74.13: RNCC: 5 | RNVC: 1

21 Feb 1987

3460-01-249-7302
Machine Collet

012497302
208: RNCC: 3 | RNVC: 9

15 Feb 1987

3460-01-231-7719
Holder Thread Tool

012317719
BXA8: RNCC: 3 | RNVC: 2
D30BXA-881: RNCC: 5 | RNVC: 2

3 May 1986

3460-01-244-0332
Inspection Mandrel

012440332
617 589 05 23 00: RNCC: 3 | RNVC: 2

6 Nov 1986

3460-01-243-1869
Abrasive Wheel

012431869
B74.2 A36KBF 2X1/8X3/8: RNCC: 3 | RNVC: 1
A36-T-BF2 TY1 2X1/8X3/8HOLE: RNCC: 3 | RNVC: 2
B7.1: RNCC: 5 | RNVC: 1
B74.13: RNCC: 5 | RNVC: 1

23 Oct 1986

3460-01-235-7476
Toolmaker's Parallel Clamp

012357476
599-754-8-2: RNCC: 3 | RNVC: 2
599-754-8: RNCC: 5 | RNVC: 9

4 Jul 1986

3460-01-234-7886
Abrasive Wheel

012347886
K2-743-830: RNCC: 3 | RNVC: 9

19 Jun 1986

3460-01-234-5112
Boring Head

012345112
UPA4-S5-DS60: RNCC: 3 | RNVC: 2

14 Jun 1986

3460-01-234-0991
Abrasive Wheel

012340991
048011-03729-5: RNCC: 3 | RNVC: 2
048011-03729-5: RNCC: 3 | RNVC: 9
SCOTCH BRITE A COARSE: RNCC: 5 | RNVC: 9

7 Jun 1986

3460-01-234-0196
Boring Head

012340196
UPA-K5674: RNCC: 3 | RNVC: 2

6 Jun 1986

3460-01-233-3296
Abrasive Wheel

012333296
048011-01565-1: RNCC: 3 | RNVC: 2
048011-01565-1: RNCC: 3 | RNVC: 9
SCOTCH BRITE 5A FINE: RNCC: 5 | RNVC: 9

29 May 1986

3460-01-228-8291
Abrasive Wheel

012288291
ANSI B7.1: RNCC: 3 | RNVC: 1
ANSI B74.13: RNCC: 3 | RNVC: 1
ANSI B74.2: RNCC: 3 | RNVC: 1
B122/38A60PVN3/8X1/8SPINDLE: RNCC: 5 | RNVC: 9

21 Mar 1986

3460-01-226-9830
Boring Tool Bar

012269830
A06-NER1: RNCC: 3 | RNVC: 2
S06-NER1: RNCC: 5 | RNVC: 9

26 Feb 1986

3460-01-226-8084
Abrasive Wheel

012268084
ANSI B74.1: RNCC: 3 | RNVC: 1
4ANSI B74.13 2 X 1/8 X 1/4: RNCC: 3 | RNVC: 2
A54-TBNA 2X1/8X1/4HOLE: RNCC: 5 | RNVC: 2
ANSI B74.2 TYPE 1 A54TBF: RNCC: 5 | RNVC: 2

22 Feb 1986

3460-01-226-6524
Piston Pin Bushing Arbor

012266524
2471682: RNCC: 3 | RNVC: 2
2471682: RNCC: 3 | RNVC: 9

20 Feb 1986

3460-01-224-4203
Toggle Shoe Clamp

012244203
44106: RNCC: 3 | RNVC: 2

16 Jan 1986

3460-01-191-7569
Abrasive Wheel

011917569
S-8INX1INX1IN UNITIZED TY7S: RNCC: 3 | RNVC: 9
S-8INX1INX1IN UNITIZED TY7S: RNCC: 5 | RNVC: 9

12 Oct 1984

3460-01-220-7157
Chuck Collet

012207157
212: RNCC: 3 | RNVC: 9

17 Nov 1985

3460-01-219-7887
Cutting Tool Holder

012197887
3307A41: RNCC: 3 | RNVC: 2
3307A12: RNCC: 3 | RNVC: 9
3307A412: RNCC: 5 | RNVC: 2

2 Nov 1985

3460-01-218-4632
Abrasive Wheel

012184632
B74.2 A16PB 6X2X5/8: RNCC: 3 | RNVC: 1
B7.1: RNCC: 5 | RNVC: 1
B74.13: RNCC: 5 | RNVC: 1
GGG-W-290: RNCC: 5 | RNVC: 9
A16-P9-B03: RNCC: 5 | RNVC: 9

12 Oct 1985

3460-01-186-3998
Drill Chuck Arbor

011863998
A0303: RNCC: 3 | RNVC: 2

10 Aug 1984

3460-01-208-0866
Abrasive Wheel

012080866
5X601: RNCC: 3 | RNVC: 1

9 May 1985

3460-01-207-8060
Drill Chuck Key

012078060
R788-0022: RNCC: 3 | RNVC: 2

5 May 1985

3460-01-204-5069
Countersink Pilot

012045069
003 0650: RNCC: 3 | RNVC: 2
003-0650: RNCC: 5 | RNVC: 2
003 0650: RNCC: 5 | RNVC: 9
122461: RNCC: 5 | RNVC: 9
122461: RNCC: 5 | RNVC: 9
030-0650: RNCC: 5 | RNVC: 9

27 Mar 1985

3460-01-203-7946
Expansion Mandrel

012037946
030-441: RNCC: 3 | RNVC: 2
003 0441: RNCC: 5 | RNVC: 2
123950: RNCC: 5 | RNVC: 2
003-0441: RNCC: 5 | RNVC: 9
123950: RNCC: 5 | RNVC: 9
003 0441: RNCC: 5 | RNVC: 9

20 Mar 1985

3460-01-203-2760
Pilot

012032760
10534: RNCC: 3 | RNVC: 2

13 Mar 1985

3460-01-203-2758
Pilot

012032758
10528: RNCC: 3 | RNVC: 2

13 Mar 1985

3460-01-203-2756
Milling Cutter Arbor

012032756
10816: RNCC: 3 | RNVC: 2

13 Mar 1985

3460-01-203-2724
Arbor Adapter

012032724
10851: RNCC: 3 | RNVC: 2

13 Mar 1985

3460-01-202-2889
Boring Bar Clamp

012022889
CM-73: RNCC: 3 | RNVC: 2
CM-73: RNCC: 5 | RNVC: 9

28 Feb 1985

3460-01-201-0596
Grinding Machine Pedestal

012010596
DU-9883: RNCC: 3 | RNVC: 9

12 Feb 1985

3460-01-198-9956
Abrasive Wheel

011989956
W188: RNCC: 3 | RNVC: 2

17 Jan 1985

3460-01-152-5957
Abrasive Wheel

011525957
B442 FINE S/C: RNCC: 3 | RNVC: 2
SCOTCH-BRITE SST TYPE S: RNCC: 5 | RNVC: 9
SST-8X1X3IN: RNCC: 5 | RNVC: 9
SCOTCH-BRITE SST TYPE S: RNCC: 5 | RNVC: 9

5 May 1983

3460-01-150-3136
Abrasive Wheel

011503136
TY S SST 6X1X1 DEBURRING CONVLUT: RNCC: 3 | RNVC: 9
BEAR TEX B442 6X1X1: RNCC: 5 | RNVC: 2
TY S SST 6X1X1 DEBURRING CONVLUT: RNCC: 5 | RNVC: 9

4 Apr 1983

3460-01-196-0135
Milling Cutter Arbor

011960135
11088: RNCC: 3 | RNVC: 2

6 Dec 1984

3460-01-195-3361
Boring Tool Bar

011953361
A10-NER2: RNCC: 3 | RNVC: 2
S10NER2: RNCC: 5 | RNVC: 9
B-2905: RNCC: 5 | RNVC: 9
S10NER2: RNCC: 5 | RNVC: 9

28 Nov 1984

3460-01-195-1724
Counterbore Pilot

011951724
P-20-4: RNCC: 3 | RNVC: 2

22 Nov 1984

3460-01-194-1770
Machine Table Vise

011941770
5226A5: RNCC: 3 | RNVC: 2

10 Nov 1984

3460-01-192-3089
Cutting Tool Holder

011923089
DCLNL-246D: RNCC: 3 | RNVC: 2
DCLNL-246D: RNCC: 5 | RNVC: 9

19 Oct 1984

3460-01-192-0564
Boring Tool Bar

011920564
S24DCLNR4: RNCC: 3 | RNVC: 2
SI-MCLNR: RNCC: 5 | RNVC: 2
B-37-12: RNCC: 5 | RNVC: 9
S24DCLNR4: RNCC: 5 | RNVC: 9

16 Oct 1984

3460-01-191-6412
Abrasive Wheel

011916412
B74.2 A54KBF 2-1/2X/16X1/4: RNCC: 3 | RNVC: 1
A54-TB25 D SIDE: RNCC: 3 | RNVC: 2
A54-TBX2-1/2X1/16X1/4: RNCC: 3 | RNVC: 2
B7.1: RNCC: 5 | RNVC: 1
B74.13: RNCC: 5 | RNVC: 1
A54-FFX 2-1/2X1/16X1/4: RNCC: 5 | RNVC: 9

11 Oct 1984

3460-01-189-9876
Abrasive Wheel

011899876
57A60-K5VBE TY 05: RNCC: 3 | RNVC: 1
ANSI B7.1: RNCC: 3 | RNVC: 1
ANSI B74.13: RNCC: 3 | RNVC: 1
ANSI B74.2: RNCC: 3 | RNVC: 1
3A60-K5-V22: RNCC: 3 | RNVC: 1

21 Sep 1984

3460-01-189-7942
Expansion Mandrel

011897942
003-0620: RNCC: 3 | RNVC: 2
35363159: RNCC: 5 | RNVC: 2
003 0620: RNCC: 5 | RNVC: 9
123960: RNCC: 5 | RNVC: 9
123960: RNCC: 5 | RNVC: 9
030-620: RNCC: 5 | RNVC: 9

20 Sep 1984

3460-01-189-7943
Expansion Mandrel

011897943
003-0441: RNCC: 3 | RNVC: 2
35363167: RNCC: 5 | RNVC: 2

20 Sep 1984

3460-01-189-7840
Cylinder Head Stand

011897840
003-0562: RNCC: 3 | RNVC: 2
35363142: RNCC: 5 | RNVC: 2

20 Sep 1984

3460-01-189-0269
Lapping Block

011890269
J-22080-1: RNCC: 3 | RNVC: 2
2BA214: RNCC: 5 | RNVC: 9

11 Sep 1984

3460-01-186-9988
Abrasive Wheel

011869988
974-56: RNCC: 3 | RNVC: 2

17 Aug 1984

3460-01-185-3705
Abrasive Wheel

011853705
C1-115-034 39561: RNCC: 3 | RNVC: 2
977-1-7000: RNCC: 5 | RNVC: 2

27 Jul 1984

3460-01-177-9367
Drill Chuck Key

011779367
906261: RNCC: 3 | RNVC: 2
137-1566: RNCC: 5 | RNVC: 2

29 Apr 1984

3460-01-176-2388
Chuck

011762388
0N242330: RNCC: 3 | RNVC: 2

10 Apr 1984

3460-01-175-3291
Drill Chuck

011753291
906263: RNCC: 3 | RNVC: 2

30 Mar 1984

3460-01-173-6989
Machine Collet

011736989
37431-3: RNCC: 3 | RNVC: 2
37431-3: RNCC: 3 | RNVC: 9

7 Mar 1984

3460-01-173-3984
Quick Change Chuck Adapter

011733984
41750-3: RNCC: 3 | RNVC: 2
41750-3: RNCC: 3 | RNVC: 9
30847-3: RNCC: 5 | RNVC: 9

5 Mar 1984

3460-01-171-9458
Abrasive Wheel

011719458
B74.2 A60KV 8X1X5/8: RNCC: 3 | RNVC: 1
A60-M5VBE: RNCC: 3 | RNVC: 2
B7.1: RNCC: 5 | RNVC: 1
B74.13: RNCC: 5 | RNVC: 1
5X598/1INX5/8 BORE: RNCC: 5 | RNVC: 9

15 Feb 1984

3460-01-171-9459
Abrasive Wheel

011719459
B74.2 A24RB 9X1/8X7/8: RNCC: 3 | RNVC: 1
B7.1: RNCC: 5 | RNVC: 1
B74.13: RNCC: 5 | RNVC: 1
A24RBFA 9X1/8X7/8: RNCC: 5 | RNVC: 2

15 Feb 1984

3460-01-170-7311
Abrasive Wheel

011707311
426-05-100-5005: RNCC: 3 | RNVC: 9

29 Jan 1984

3460-01-166-8801
Arbor Drive

011668801
17-H-5: RNCC: 3 | RNVC: 2

18 Nov 1983

3460-01-166-7646
Drill Chuck Key

011667646
9-2058: RNCC: 3 | RNVC: 2
1-62326-00: RNCC: 5 | RNVC: 9
2058: RNCC: 5 | RNVC: 9

16 Nov 1983

3460-01-166-7637
Abrasive Wheel

011667637
B74.2: RNCC: 3 | RNVC: 1
A100-OBNA2: RNCC: 3 | RNVC: 2
B7.1: RNCC: 5 | RNVC: 1
B74.13: RNCC: 5 | RNVC: 1
A100-OBNA: RNCC: 5 | RNVC: 9

16 Nov 1983

3460-01-166-2107
Solid Machine Mandrel

011662107
92864-991: RNCC: 3 | RNVC: 2
92864-991: RNCC: 3 | RNVC: 9
4537408-018: RNCC: 5 | RNVC: 9

9 Nov 1983

3460-01-161-7181
Arbor

011617181
2-74118-1: RNCC: 3 | RNVC: 9
2-74118-1: RNCC: 5 | RNVC: 9
2-74118-1: RNCC: C | RNVC: 1

9 Sep 1983

3460-01-157-8670
Shroud Grinding Arbor

011578670
PWC33294: RNCC: 3 | RNVC: 2
PWC33294: RNCC: 5 | RNVC: 2

13 Jul 1983

3460-01-157-5149
Abrasive Wheel

011575149
85115-DM: RNCC: 3 | RNVC: 2
1DP-586-19: RNCC: 5 | RNVC: 2

7 Jul 1983

3460-01-156-0654
Abrasive Wheel

011560654
38A180MVBEM: RNCC: 3 | RNVC: 1
ANSI B7.1: RNCC: 5 | RNVC: 1
ANSI B74.13: RNCC: 5 | RNVC: 1
ANSI B74.2: RNCC: 5 | RNVC: 1

18 Jun 1983

3460-01-156-0655
Abrasive Wheel

011560655
B74.2 TY1: RNCC: 3 | RNVC: 1
32A80-K5VBE: RNCC: 3 | RNVC: 2
B7.1: RNCC: 5 | RNVC: 1
B74.13: RNCC: 5 | RNVC: 1

18 Jun 1983

3460-01-155-4039
Lapping Box

011554039
J22090-3: RNCC: 3 | RNVC: 2
2BA215: RNCC: 5 | RNVC: 2
2BA215: RNCC: 5 | RNVC: 9

8 Jun 1983

3460-01-149-5744
Cutting Tool Holder

011495744
HKLCR-1205A: RNCC: 3 | RNVC: 2
NELR-1205A: RNCC: 5 | RNVC: 9
NELR-1205A: RNCC: 5 | RNVC: 9

22 Mar 1983

3460-01-149-5739
Drill Chuck Key

011495739
98006/91-206-C1: RNCC: 3 | RNVC: 2

22 Mar 1983

3460-01-146-4698
Abrasive Wheel

011464698
12000647-24: RNCC: 1 | RNVC: 2
1129-0007: RNCC: 3 | RNVC: 9

31 Jan 1983

3460-01-145-0915
Expansion Mandrel

011450915
1-69411-9: RNCC: 3 | RNVC: 9
1-69411-1: RNCC: 5 | RNVC: 9

5 Jan 1983

3460-01-139-4140
Counterbore Pilot

011394140
P-20: RNCC: 3 | RNVC: 2
P-20: RNCC: 5 | RNVC: 9

30 Sep 1982

3460-01-139-4135
Counterbore Pilot

011394135
P-33A: RNCC: 3 | RNVC: 2
P-33A: RNCC: 5 | RNVC: 9

30 Sep 1982

3460-01-136-3113
Counterbore Pilot

011363113
P-100: RNCC: 3 | RNVC: 2
P-100: RNCC: 5 | RNVC: 9

6 Aug 1982

3460-01-136-1503
Counterbore Pilot

011361503
P-75: RNCC: 3 | RNVC: 2
P-75: RNCC: 5 | RNVC: 9

4 Aug 1982

3460-01-131-9618
Solid Machine Mandrel Set

011319618
11021150: RNCC: 3 | RNVC: 2

20 May 1982

3460-01-127-7176
Abrasive Wheel

011277176
B74.2 TY1 A60MB 12X3/32X1-1/4: RNCC: 3 | RNVC: 1
UA601-PB25B: RNCC: 3 | RNVC: 2
10-4416-010: RNCC: 3 | RNVC: 2
B74.13: RNCC: 5 | RNVC: 1
B7.1: RNCC: 5 | RNVC: 1

6 Mar 1982

3460-01-050-9703
Abrasive Wheel

010509703
3A MED 3X3/4X1/4 UNITIZED: RNCC: 3 | RNVC: 9
MIL-W-81319: RNCC: 4 | RNVC: 1
3A MED 3X3/4X1/4 UNITIZED: RNCC: 5 | RNVC: 9
3A MED 3X3/4X1/4 UNITIZED: RNCC: 5 | RNVC: 9
31A: RNCC: 5 | RNVC: 9

17 Nov 1977

3460-01-116-6010
Collet Chuck

011166010
SS050-DA304681: RNCC: 3 | RNVC: 2
2-10-008-304: RNCC: 5 | RNVC: 9
SS050-DA304681: RNCC: 5 | RNVC: 9

30 Jul 1981

3460-01-116-6009
Collet Chuck

011166009
SS100-DA104731: RNCC: 3 | RNVC: 2
SS100DA104731: RNCC: 5 | RNVC: 9
2-10-037-104: RNCC: 5 | RNVC: 9

30 Jul 1981

3460-01-112-8603
Solid Machine Mandrel

011128603
300-M: RNCC: 3 | RNVC: 9

11 May 1981

3460-01-112-0877
Abrasive Wheel

011120877
B74.2 TY1 A60J8V 14X1X5: RNCC: 3 | RNVC: 1
38A60-J8VBE/14 X 1 X 5: RNCC: 3 | RNVC: 2
RA60-J-V8/14 X 1 X 5: RNCC: 3 | RNVC: 2
B74.13: RNCC: 5 | RNVC: 1
RA60-J-V8: RNCC: 5 | RNVC: 1
B7.1: RNCC: 5 | RNVC: 1

26 Apr 1981

3460-01-109-4773
Lathe Center

011094773
CE1890: RNCC: 3 | RNVC: 2

15 Mar 1981

3460-01-026-4781
Cylinder Hone Stone And Holder

010264781
P28-J63: RNCC: 3 | RNVC: 2

25 Aug 1976

3460-01-106-9870
Counterbore Pilot

011069870
ZT82A-1: RNCC: 3 | RNVC: 2

28 Jan 1981

3460-01-105-9894
Abrasive Wheel

011059894
B74.2 A24RBF 9X1/4X5/8: RNCC: 3 | RNVC: 1
49104 TY 2: RNCC: 3 | RNVC: 2
DC9A/TP27T: RNCC: 3 | RNVC: 2
B74.13: RNCC: 5 | RNVC: 1
B7.1: RNCC: 5 | RNVC: 1
A24-R-BFCW: RNCC: 5 | RNVC: 1
A24-R-BFCW 9 X 1/4 X 5/8-11: RNCC: 5 | RNVC: 2

9 Jan 1981

3460-01-103-3118
Drill Chuck Arbor

011033118
75009: RNCC: 3 | RNVC: 2
16-H-4: RNCC: 5 | RNVC: 9

11 Nov 1980

3460-01-102-0522
Countersink Pilot

011020522
MM285-2: RNCC: 3 | RNVC: 2
ZT82A-2: RNCC: 5 | RNVC: 2

11 Oct 1980

3460-01-101-1066
Drill Chuck

011011066
02050: RNCC: 3 | RNVC: 2
33: RNCC: 5 | RNVC: 2

19 Sep 1980

3460-01-098-6647
Boring Tool Bar

010986647
A06RCTFPR2: RNCC: 3 | RNVC: 2
A06CTFPR2: RNCC: 5 | RNVC: 9
S 06 KTFPR2: RNCC: 5 | RNVC: 9
B-1003: RNCC: 5 | RNVC: 9
S 06 KTFPR2: RNCC: 5 | RNVC: 9

6 Aug 1980

3460-01-088-2910
Abrasive Wheel

010882910
809M REGULAR: RNCC: 3 | RNVC: 2
816M: RNCC: 3 | RNVC: 2

10 Jan 1980

3460-01-087-4533
Abrasive Wheel

010874533
11-4244: RNCC: 3 | RNVC: 2

18 Dec 1979

3460-00-993-6597
Abrasive Wheel

009936597
MILW17929TYPE1: RNCC: 3 | RNVC: 1
A3605V2: RNCC: 3 | RNVC: 1

1 Jan 1963

3460-01-084-8507
Planer Jack

010848507
S190: RNCC: 3 | RNVC: 2

25 Oct 1979

3460-01-080-2653
Grinding-Buffing-Wire Brush Wheel Arbor

010802653
QC-44: RNCC: 3 | RNVC: 9
08834137003: RNCC: 5 | RNVC: 9

22 Jul 1979

3460-01-079-6643
Hold Down Machine Clamp

010796643
CL-1-CA: RNCC: 3 | RNVC: 2

10 Jul 1979

3460-01-079-4533
Handpieces Abrasive

010794533
ST70AL088X: RNCC: 3 | RNVC: 9
67894: RNCC: 5 | RNVC: 9

6 Jul 1979

3460-00-985-1896
Abrasive Wheel

009851896
A46Q6V: RNCC: 3 | RNVC: 1

1 Jan 1962

NSN 3460-01-077-6481 010776481 MANDREL,ABRASIVE ROLL

3460-01-077-6481
Abrasive Roll Mandrel

010776481
M-8: RNCC: 3 | RNVC: 9
81208: RNCC: 5 | RNVC: 9
08834181208: RNCC: 5 | RNVC: 9

27 May 1979

3460-01-071-7521
Machine Collet

010717521
483-1-32IN: RNCC: 3 | RNVC: 9
483-DRE: RNCC: 5 | RNVC: 2

14 Feb 1979

3460-01-071-7523
Machine Collet

010717523
481-3-32IN: RNCC: 3 | RNVC: 9
DRE-481: RNCC: 5 | RNVC: 2

14 Feb 1979

3460-01-071-7522
Machine Collet

010717522
482-1-16IN: RNCC: 3 | RNVC: 9
482-DRE: RNCC: 5 | RNVC: 2

14 Feb 1979

3460-01-070-9184
Abrasive Wheel

010709184
5X587: RNCC: 3 | RNVC: 2
B74.13: RNCC: 5 | RNVC: 1
B74.2 TY1A24KBF 9X1/4X5/8: RNCC: 5 | RNVC: 2

24 Jan 1979

3460-01-068-3483
Abrasive Wheel

010683483
B74.2 A60RV 1-1/2X3/8X1/4: RNCC: 3 | RNVC: 1
SA60-O-12V3 1-1/2X3/8A34 D2: RNCC: 3 | RNVC: 2
38A60-P-VM 1-1/2X3/8A34D2MANDREL: RNCC: 3 | RNVC: 2
GA60-R-V-40 1-1/2X3/8A34D2: RNCC: 3 | RNVC: 9
B74.13: RNCC: 5 | RNVC: 1
A34-A60-R-V 1-1/2X3/8 D2: RNCC: 5 | RNVC: 9
MIL-W-17663: RNCC: 5 | RNVC: 9
3A60-R-V6 1-1/2X3/8 A34D2MANDREL: RNCC: 5 | RNVC: 9

22 Nov 1978

3460-01-066-7474
Boring Tool Bar

010667474
GTB-143: RNCC: 3 | RNVC: 9

17 Oct 1978

3460-01-062-0912
Quick Change Chuck Adapter

010620912
D-6000-A1: RNCC: 3 | RNVC: 9
B-2000: RNCC: 5 | RNVC: 9

9 Jul 1978

3460-01-061-7650
Boring Bar Clamp

010617650
NC-3ACL: RNCC: 3 | RNVC: 2
NC-3ACL: RNCC: 3 | RNVC: 9

29 Jun 1978

3460-01-061-7651
Boring Bar Clamp

010617651
NC-2CL: RNCC: 3 | RNVC: 9

29 Jun 1978

3460-01-061-2436
Drill Chuck

010612436
516041-7: RNCC: 3 | RNVC: 2

15 Jun 1978

3460-01-055-9645
Boring Tool Bar

010559645
HSS-312A: RNCC: 3 | RNVC: 9

14 Feb 1978

3460-01-055-6061
Drill Chuck

010556061
J-680: RNCC: 3 | RNVC: 2
J-680: RNCC: 5 | RNVC: 9

8 Feb 1978

3460-01-053-4232
Wheel Dressing Diamond Nib

010534232
NT1L4: RNCC: 3 | RNVC: 2
NT1L4: RNCC: 3 | RNVC: 9

5 Jan 1978

3460-01-051-7555
Boring Tool Bar

010517555
A12S-STURN3: RNCC: 3 | RNVC: 2
S12-STUNR3: RNCC: 5 | RNVC: 9
B1606: RNCC: 5 | RNVC: 9
S12-STUNR3: RNCC: 5 | RNVC: 9
ST 12URN3: RNCC: 5 | RNVC: 9

5 Dec 1977

3460-01-051-1402
Boring Tool Bar

010511402
E08F-CTFPR2: RNCC: 3 | RNVC: 2
C08F-KTFPR2: RNCC: 5 | RNVC: 9
B7004: RNCC: 5 | RNVC: 9
C08F-KTFPR2: RNCC: 5 | RNVC: 9

22 Nov 1977

3460-01-051-1398
Cylinder Hone Stone And Holder

010511398
P28-A63: RNCC: 3 | RNVC: 2

22 Nov 1977

3460-01-051-0897
Indexing Fixture Plate

010510897
12266616: RNCC: 3 | RNVC: 2
6695-687: RNCC: 5 | RNVC: 9

22 Nov 1977

3460-01-050-9855
V-Block

010509855
9133: RNCC: 3 | RNVC: 2

17 Nov 1977

3460-01-050-5963
Boring Tool Bar

010505963
A08RSTUNR2: RNCC: 3 | RNVC: 2
S08-STUNR2: RNCC: 5 | RNVC: 9
S08-STUNR2: RNCC: 5 | RNVC: 9
B-1504: RNCC: 5 | RNVC: 9

10 Nov 1977

3460-01-050-5294
Boring Tool Bar

010505294
A06-STUNR2: RNCC: 3 | RNVC: 2
S06-STUNR2: RNCC: 5 | RNVC: 9
B-1503: RNCC: 5 | RNVC: 9
S06-STUNR2: RNCC: 5 | RNVC: 9

8 Nov 1977

3460-01-050-4796
Cutting Tool Holder

010504796
NSL-204D: RNCC: 3 | RNVC: 2
FNSL-204D: RNCC: 5 | RNVC: 2
NSL-204D: RNCC: 5 | RNVC: 9

8 Nov 1977

3460-01-050-4797
Cutting Tool Holder

010504797
CTGPR102B: RNCC: 3 | RNVC: 2
KTGR-102C: RNCC: 5 | RNVC: 9
MTGNR-102C: RNCC: 5 | RNVC: 9
KTGR-102C: RNCC: 5 | RNVC: 9

8 Nov 1977

3460-01-050-2164
Abrasive Wheel

010502164
B74.2: RNCC: 3 | RNVC: 1
AA60J8V40: RNCC: 3 | RNVC: 2
B74.13: RNCC: 5 | RNVC: 1
6X1/4X1-1/4A60J8VTY1SHA: RNCC: 5 | RNVC: 9
AA60J8V40: RNCC: 5 | RNVC: 9
MIL-W-17929: RNCC: 5 | RNVC: 9
B74.2 TY1 A60J5V 6X1/4X1-1/4: RNCC: E | RNVC: 8
32A60-J5VBE: RNCC: E | RNVC: 8
32A60-J5VBE 6 X 1/4 X 1-1/4: RNCC: E | RNVC: 8
B7.1: RNCC: E | RNVC: 8

1 Nov 1977

3460-01-050-0988
Cutting Tool Holder

010500988
NSL-122B: RNCC: 3 | RNVC: 2
NSL-122B: RNCC: 5 | RNVC: 9

31 Oct 1977

3460-01-049-9537
Boring Tool Bar

010499537
A10SSTUNR2: RNCC: 3 | RNVC: 2
S10-STUNR2: RNCC: 5 | RNVC: 9
S10-STUNR2: RNCC: 5 | RNVC: 9
B1505: RNCC: 5 | RNVC: 9

30 Oct 1977

3460-01-049-9536
Cutting Tool Holder

010499536
CTGPR-204D: RNCC: 3 | RNVC: 2
CTAPR-854C: RNCC: 3 | RNVC: 2
CTAPR-854D: RNCC: 3 | RNVC: 9
KTAR854C: RNCC: 5 | RNVC: 9

30 Oct 1977

3460-01-048-5627
Boring Tool Bar

010485627
A16-CTFPR3: RNCC: 3 | RNVC: 2
41664 A16-CTFPR-3: RNCC: 5 | RNVC: 2
S16-KTFPR3: RNCC: 5 | RNVC: 9
SF25-4CTPR-16: RNCC: 5 | RNVC: 9
S16-KTFPR3: RNCC: 5 | RNVC: 9
B1108: RNCC: 5 | RNVC: 9

28 Sep 1977

3460-01-048-5625
Cutting Tool Holder

010485625
CA16: RNCC: 3 | RNVC: 2
D40CA16C: RNCC: 5 | RNVC: 2

28 Sep 1977

3460-01-048-2729
Abrasive Wheel

010482729
5X2X1-1/4A60H8VTY6: RNCC: 2 | RNVC: 2
B74.2 A60HV 5X2X1-1/4: RNCC: 5 | RNVC: 1
38A60-H8VBE: RNCC: 5 | RNVC: 1
5X2X1 1/49A60H8V22X5: RNCC: 5 | RNVC: 1
B7.1: RNCC: 5 | RNVC: 1
B74.13: RNCC: 5 | RNVC: 1
MIL-W-17929: RNCC: 5 | RNVC: 9

22 Sep 1977

3460-01-047-5481
Boring Tool Bar

010475481
E08CCTFPR2: RNCC: 3 | RNVC: 2
E08CCTFPR2: RNCC: 5 | RNVC: 9
B7204: RNCC: 5 | RNVC: 9
C08C-KTFPR2: RNCC: 5 | RNVC: 9

9 Sep 1977

3460-01-047-4300
Cutting Tool Holder

010474300
CA20: RNCC: 3 | RNVC: 2

7 Sep 1977

3460-01-047-4220
Boring Head

010474220
H20-DDUNR4W: RNCC: 3 | RNVC: 2
1036: RNCC: 5 | RNVC: 9
H20-DDUNR4W: RNCC: 5 | RNVC: 9

7 Sep 1977

3460-01-047-4144
Boring Bar Holder

010474144
D5420W: RNCC: 3 | RNVC: 2
B-5410: RNCC: 5 | RNVC: 9
D5420W: RNCC: 5 | RNVC: 9

7 Sep 1977

3460-01-047-4063
Abrasive Wheel

010474063
6X1/2X5/8C80J6VTY1SHA: RNCC: 2 | RNVC: 2
3C-80J6-V32: RNCC: 5 | RNVC: 1
B7.1: RNCC: 5 | RNVC: 1
B74.13: RNCC: 5 | RNVC: 1
B74.2 C80JV 6X1/2X5/8: RNCC: 5 | RNVC: 1
C-80J6-V32 6X1/2X5/8: RNCC: 5 | RNVC: 1
MIL-W-17929: RNCC: 5 | RNVC: 9

7 Sep 1977

3460-01-047-4064
Abrasive Wheel

010474064
204-XF: RNCC: 3 | RNVC: 2

7 Sep 1977

3460-01-046-4751
Tool Holder Clamp

010464751
CCL-3B: RNCC: 3 | RNVC: 2
CCL-3B: RNCC: 5 | RNVC: 9

18 Aug 1977

3460-01-043-1680
Lapping Block

010431680
036542: RNCC: 3 | RNVC: 2
A53720PC12: RNCC: D | RNVC: 9

19 Jun 1977

3460-01-043-1518
Abrasive Wheel

010431518
B74.2 A46Q7BF 12X1/16X1-1/4: RNCC: 3 | RNVC: 1
A46-PB25N 12X1/16X1-1/4: RNCC: 3 | RNVC: 2
B7.1: RNCC: 5 | RNVC: 1
B74.13: RNCC: 5 | RNVC: 1
A46-Q7BF: RNCC: 5 | RNVC: 9

19 Jun 1977

3460-01-043-0185
Tool Holder Clamp

010430185
CK-21: RNCC: 3 | RNVC: 2
CK-21: RNCC: 5 | RNVC: 9

19 Jun 1977

3460-01-027-3298
Abrasive Wheel

010273298
A36-O-5VS: RNCC: 3 | RNVC: 1
B74.2 A36OV 12X2X1-1/4: RNCC: 3 | RNVC: 1
B74.13: RNCC: 5 | RNVC: 1
MIL-W-17929: RNCC: 5 | RNVC: 9

16 Sep 1976

3460-01-026-2379
Guide Shoe

010262379
WD-D: RNCC: 3 | RNVC: 2

19 Aug 1976

3460-01-025-5906
Power-Lock Holder

010255906
64001: RNCC: 3 | RNVC: 9
08834164001: RNCC: 5 | RNVC: 9
PM-75: RNCC: 5 | RNVC: 9

5 Aug 1976

3460-01-025-1560
V-Block Clamp

010251560
599-9749-12: RNCC: 3 | RNVC: 2

27 Jul 1976

3460-00-900-7093
Abrasive Wheel

009007093
GGG-W-290: RNCC: 4 | RNVC: 1
GGG-W-290 TY1: RNCC: 5 | RNVC: 1

1 Jan 1960

3460-00-999-1210
Solid Machine Mandrel Set

009991210
851-ST691: RNCC: 3 | RNVC: 2
0121999-1: RNCC: 3 | RNVC: 2
ST691: RNCC: 3 | RNVC: 2
11600059: RNCC: 5 | RNVC: 1
34X9991210: RNCC: 5 | RNVC: 9

25 Dec 1965

3460-00-882-1235
Abrasive Wheel

008821235
A46M5VBE: RNCC: 3 | RNVC: 1
MILW17929: RNCC: 4 | RNVC: 1

1 Jan 1962

3460-00-882-1229
Abrasive Wheel

008821229
A46M5VBE: RNCC: 3 | RNVC: 1
MILW17929TYPE1: RNCC: 4 | RNVC: 1

1 Jan 1962

3460-00-864-1275
Board Collet

008641275
140635-000: RNCC: 3 | RNVC: 2

1 Jan 1962

3460-00-862-5617
Abrasive Wheel

008625617
A54-M6VBA: RNCC: 3 | RNVC: 1
DA545M6V11: RNCC: 3 | RNVC: 1
DA545M6V11: RNCC: 3 | RNVC: 2

18 Oct 1967

3460-00-843-3251
Abrasive Wheel

008433251
B7.1: RNCC: 3 | RNVC: 1
MIL-W-17929: RNCC: 4 | RNVC: 1
B74.2 6 X 3/4 X 1-1/4: RNCC: 5 | RNVC: 1
B74.13 TYPE 12 A120KV: RNCC: 5 | RNVC: 1

1 Jan 1963

3460-00-843-3246
Abrasive Wheel

008433246
MILW17929: RNCC: 4 | RNVC: 1

1 Jan 1963

3460-00-728-9239
Abrasive Wheel

007289239
MILW17929: RNCC: 4 | RNVC: 1

1 Jan 1961

3460-00-724-4639
Abrasive Wheel

007244639
MILW17929: RNCC: 4 | RNVC: 1

1 Jan 1961

3460-00-724-4635
Abrasive Wheel

007244635
MILW17929: RNCC: 4 | RNVC: 1

1 Jan 1961

3460-00-710-7958
Abrasive Wheel

007107958
C20R9BR: RNCC: 3 | RNVC: 1

1 Jan 1961

3460-00-528-3112
Abrasive Wheel

005283112
B7.1: RNCC: 3 | RNVC: 1
B74.2 3 X 1/4 X 3/8: RNCC: 3 | RNVC: 2
B74.13 TYPE 1 A60KB: RNCC: 3 | RNVC: 2

1 Jan 1963

3460-00-554-9205
Abrasive Wheel

005549205
B74.2: RNCC: 3 | RNVC: 1
B7.1: RNCC: 5 | RNVC: 1
B74.13: RNCC: 5 | RNVC: 1
MIL-W-17929: RNCC: 5 | RNVC: 9

1 Jan 1963

3460-00-528-2391
Abrasive Wheel

005282391
B74.2: RNCC: 3 | RNVC: 1
B74.13: RNCC: 5 | RNVC: 1
MIL-W-17929: RNCC: 5 | RNVC: 9

1 Jan 1963

3460-00-522-2795
Abrasive Wheel

005222795
B74.13: RNCC: 3 | RNVC: 1
38A60-J5VBE/TY1 3 X 3/8 X 1/4: RNCC: 3 | RNVC: 2
38A60-J5VBE: RNCC: 5 | RNVC: 1
B7.1: RNCC: 5 | RNVC: 1
B74.2 TY 1 A60JV-3X1/4X3/4: RNCC: 5 | RNVC: 2
MIL-W-17929: RNCC: 5 | RNVC: 9

23 Aug 1974

3460-00-516-4930
Abrasive Wheel

005164930
B74.2 TY1: RNCC: 3 | RNVC: 1
B74.13: RNCC: 5 | RNVC: 1
MIL-W-17929: RNCC: 5 | RNVC: 9

1 Jan 1963

3460-00-516-4910
Abrasive Wheel

005164910
B74.2: RNCC: 3 | RNVC: 1
B74.13: RNCC: 5 | RNVC: 1
MIL-W-17929: RNCC: 5 | RNVC: 9

1 Jan 1963

3460-00-170-5300
Abrasive Wheel

001705300
B74.2 A36PV 6X1-1/4X1: RNCC: 3 | RNVC: 1
B7.1: RNCC: 5 | RNVC: 1
B74.13: RNCC: 5 | RNVC: 1
MIL-W-17929: RNCC: 5 | RNVC: 9

1 Jan 1963

3460-00-076-8976
Drill Chuck

000768976
9074558-4: RNCC: 3 | RNVC: 2
20033: RNCC: 5 | RNVC: 9

1 Jan 1963

3460-00-063-7314
Lathe Center

000637314
R-4HD 4MT: RNCC: 3 | RNVC: 2
R4HD: RNCC: 5 | RNVC: 9

22 Jun 1967

3460-00-010-5069
Hold Down Machine Clamp

000105069
601: RNCC: 3 | RNVC: 9
A3042036: RNCC: C | RNVC: 1

1 Jan 1961

3460-00-313-2103
Tapping Attachment

003132103
2B: RNCC: 3 | RNVC: 1

1 Jan 1963

3460-00-228-2039
Abrasive Wheel

002282039
MIL-W-17929: RNCC: 4 | RNVC: 1

1 Jan 1963

3460-00-189-4615
Drill Chuck

001894615
7B761: RNCC: 3 | RNVC: 2

1 Jan 1963

3460-00-163-1829
Abrasive Wheel

001631829
GGG-W-290: RNCC: 4 | RNVC: 1
GGG-W-290 TY1: RNCC: 5 | RNVC: 1

1 Jan 1963

3460-00-079-0302
Mandrel Jaw

000790302
BUWEPSDWG1653533: RNCC: 3 | RNVC: 2
1653533: RNCC: 3 | RNVC: 2
BUWEPSDWG1653533: RNCC: 5 | RNVC: 9

4 Dec 1967

3460-00-069-4885
Abrasive Wheel

000694885
3A60L6V2: RNCC: 3 | RNVC: 1
3A60L6V2: RNCC: 3 | RNVC: 9

1 Jan 1963

Load More Results