What is Federal Supply Class 3460?

FSC 3460 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 3460) in the USA for supply items codified in the category of Machine Tool accessories.

What is NATO Supply Classification Class 3460?

NSC 3460 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 3460 in the USA) for supply items codified in the category of Machine Tool accessories.

Which Federal Supply Group is FSC 3460 in?

FSC 3460 is in Federal Supply Group (FSG) 34 which contains Metalworking Machinery.

Which NATO Supply Classification Group is NSC 3460 in?

NSC 3460is in NATO Supply Classification Group (NSG) 34 which contains Metalworking Machinery.

What is an Abrasive Wheel?

An Abrasive Wheel (WHEEL,ABRASIVE) is a rigid piece of abrasive with or without mounting facilities. Items having such mounting facilities as a fixed spindle, a threaded insert, or an arbor hole are designed for mounting on a grinding machine, tool chuck or mandrel. Items without mounting facilities are designed to be secured in a wheel holder by means of spring clamps.

A V-Block is a fixture of cast iron or steel, precision ground, having one or more V grooves machined parallel and squared with respect to the bottom, top, and ends. The block may have milled grooves on the sides to accommodate clamps which are used for holding cylindrical work.

What is a Machine Table Vise?

A Machine Table Vise (VISE,MACHINE TABLE) is a clamping device consisting of a base and two jaws for use on a drilling machine, milling machine, grinding machine and the like. The base may be of stationary type or may be designed for angular adjustment. It may be bolt, screw, or strap clamp mounted or flat surface for resting upon the machine table. Excludes VISE, BENCH AND MACHINE TABLE.

What is a Grinding-Buffing-Wire Brush Wheel Arbor?

A Grinding-Buffing-Wire Brush Wheel Arbor (ARBOR,WHEEL,GRINDING-BUFFING-WIRE BRUSH) is a bar of steel, machined or ground, with flange(s) and/or steel nut or machine screw. Used with drill chucks, lathe chucks, machine shafts and the like for mounting abrasive wheels, buffing wheels and wire wheels. See also ADAPTER, SPINDLE, PORTABLE SANDER.

What is a Straight Shank Tool Socket?

A Straight Shank Tool Socket (SOCKET,STRAIGHT SHANK TOOL) is a machine socket adapter for extending the length of tool sockets and/or for converting the size of sockets to size of straight tool shanks.

What is a Taper Shank Tool Socket?

A Taper Shank Tool Socket (SOCKET,TAPER SHANK TOOL) is a machine socket adapter for extending the length of tool sockets and/or for converting the size of sockets to size of taper tool shanks.

What is a Lathe Center?

A Lathe Center (CENTER,LATHE) is a device having a straight or tapered shank with a shaped head used as a bearing or support for the work.

What is a Drill Chuck?

A Drill Chuck (CHUCK,DRILL) is an accessory for holding tools with a plain cylindrical shank such as drills, taps, or the like, by means of two or more internal selfcentering (universal) jaws. It may be attached directly to the spindle of a machine, arbor, shaft, hand mechanism, or the like without the use of centers. The jaws are simultaneously adjusted by an adjusting nut, sleeve, feed screw, or the like. The maximum rated capacity of this item is one (1) inch (25.4 mm) diameter. For universal chucks having a capacity in excess of one (1) inch (25.4 mm), see CHUCK, UNIVERSAL JAW. Excludes CHUCK, CENTERING, LATHE.

What is a Machine Collet?

A Machine Collet (COLLET,MACHINE) is a work holding device consisting of a longitudinally slotted sleeve which has a tapering or conical end designed to fit into a corresponding taper of a chuck so that the lengthwise movement of the sleeve causes a contraction or expansion of the gripping surfaces. The gripping or holding tension is actuated by a backward pull (draw in) or by a forward push (force in). Used on lathes, milling machines, screw machines and the like. Excludes SOCKET, STRAIGHT SHANK TOOL and SOCKET, TAPER SHANK TOOL.

A Lathe Dog (DOG,LATHE) is a machine tool accessory used as a clamp for gripping a piece of work and conveying motion to it from the face plate.

What is an Universal Jaw Chuck?

An Universal Jaw Chuck (CHUCK,UNIVERSAL JAW) is an accessory used for holding objects directly to the spindle of a machine, arbor, shaft, or the like, without the use of centers. Two or more self-centering jaws are adjusted simultaneously, usually by rotation of a scroll gear which engages slots or teeth in the back of the jaws. Maximum rated capacity is in excess of one (1) inch (25.4 mm) diameter. For universal chucks having a maximum capacity of one (1) inch (25.4 mm) or less, see CHUCK, DRILL. Excludes CHUCK, CENTERING, LATHE.

What is a Cutting Tool Holder?

A Cutting Tool Holder (HOLDER,CUTTING TOOL) is an accessory designed to hold and support cutter bits or sleeve type boring bars of various types and sizes. It is used on lathes, automatic machines, planers, and shapers. Excludes items such as tool posts.

What is a Counterbore Pilot?

A Counterbore Pilot (PILOT,COUNTERBORE) is excludes PILOT, COUNTERSINK.

What is a Countersink Pilot?

A Countersink Pilot (PILOT,COUNTERSINK) is a device specifically designed for use in conjunction with a HOLDER, COUNTERSINK to guide and align countersink cutters. Excludes PILOT, COUNTERBORE.

What is a Solid Machine Mandrel?

A Solid Machine Mandrel (MANDREL,MACHINE,SOLID) is a cylindrical-shaped tool with a slight taper on the over-all length, centered on each end with a flat milled on the ends for a holder. It is used for holding work for machining operations on lathes and milling machines.

What is a Milling Cutter Arbor?

A Milling Cutter Arbor (ARBOR,MILLING CUTTER) is a bar of special steel, machined and ground, having a standard milling machine, Morse or Brown and Sharpe taper shank and furnished with or without bearing sleeves. It is used for mounting plain hole milling cutters of various types and sizes.

What is a Shell End Mill Arbor?

A Shell End Mill Arbor (ARBOR,SHELL END MILL) is a bar of special steel, machined and ground, having a standard milling machine or a Brown and Sharpe tapered shank. The body ends are ground to various diameters for mounting the different sizes of shell and mill cutters. It is used with adapters on milling machines having standardized spindle end and Brown and Sharpe milling machines having taper-nose or threaded spindles.

What is a Buffing Wheel?

A Buffing Wheel (WHEEL,BUFFING) is a disk shaped item of loose, bonded, or solid construction having an arbor hole for attaching to a rotary power-operated tool or machine. It may be fabricated of a single piece of felt, rubber, leather, cork, or the like; a single piece of wood, leather covered; or plies of muslin, flannel, canvass, or the like sewed or cemented together. It is used for buffing and/or polishing or burnishing. Excludes BRUSH, ROTARY (as modified); WHEEL, ABRASIVE; and PAD, POLISHING AND RUBBING.

What is a Drill Chuck Key?

A Drill Chuck Key (KEY,DRILL CHUCK) is a hand tool designed for tightening or loosening the jaws of a drill chuck.

What is an Indexing Fixture?

An Indexing Fixture is an item designed to accurately select any degree of angle for milling, grinding, drilling, or boring operations. It is not furnished with a work-holding device such as a chuck or vise. It may be furnished with centers. It may be of the automatic angle selector type, manual (perforated disk) angle selector type, or optical system positioning type. It may consist of two units (a head and a tail-stock). Excludes HOLDING FIXTURE, COLLET CHUCKING, MACHINE.

What is a Tube Bending Mandrel?

A Tube Bending Mandrel (MANDREL,TUBE BENDING) is a tool that may be either flexible or rigid, designed to be inserted into a tube or hollow section to support the wall and prevent it from flattening or collapsing during bending operations. It is used with a BENDING MACHINE, PIPE AND CONDUIT.

What is a Positioning Table?

A Positioning Table (TABLE,POSITIONING) is an item designed to accurately position another item for inspection, testing, maintenance or machining. The item is capable of linear and/or rotational movement but is not furnished with a work-holding device such as a chuck or vise. It may be manually operated or motor driven. Excludes POSITIONER, WELDING.

What is a Hold Down Machine Clamp?

A Hold Down Machine Clamp (CLAMP,MACHINE,HOLD DOWN) is a clamp for holding down work on planer, punch presses, milling machines, boring mills, drill presses and the like.

What is a Metalworking Machinery Fixture?

A Metalworking Machinery Fixture (FIXTURE,METALWORKING MACHINERY) is an item mounted on a machine table and designed for clamping and releasing a workpiece in volume production. The item may operate as a vertical or horozontal fixture, depending on the induvidual design type.

What is a Counterbore And Countersink Pilot?

A Counterbore And Countersink Pilot (PILOT,COUNTERBORE AND COUNTERSINK) is an item designed for guiding a COUNTERBORE, MACHINE or COUNTERSINK which are used for counterboring or countersinking holes in a workpiece.

What is an Universal Jaw Chuck Jaw Set?

An Universal Jaw Chuck Jaw Set (JAW SET,CHUCK,UNIVERSAL JAW) is two or more opposable parts that open and close for holding something between them. Designed to be used with a CHUCK, UNIVERSAL JAW.

What is a Lathe Steady Rest?

A Lathe Steady Rest (STEADY REST,LATHE) is an accessory, with one or more friction or roller type adjustable jaws, designed to support round material during the machining process. It may be bed or carriage mounted.

What is a Collet Chuck?

A Collet Chuck (CHUCK,COLLET) is an item designed to be adapted to a machine spindle to accommodate a collet for holding work to be machined. It may be mounted directly to the spindle or to an arbor or adapter which in turn mounts to the spindle. The chuck is manipulated to contract or expand the collet which in turn grips or releases the work. Excludes HOLDING FIXTURE, COLLET CHUCKING, MACHINE.

Machine Tool accessories - Germany (DE)

Federal Supply Class (FSC): 3460

NATO Supply Classification Class (NSC): 3460

Federal Supply Group (FSG): 34 Metalworking Machinery

NATO Supply Classification Group (NSG): 34 Metalworking Machinery

Items Managed by Germany (DE) - NCB is 12

Page 4 of 4

NSN Format for Machine Tool accessories
Codified by Germany

34	60	12	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 3460 is a classification for Machine Tool Accessories within NATO Supply Group 34, which is dedicated to Metalworking Machinery.

Machine Tool Accessories refer to a wide range of tools and equipment that are used in conjunction with machine tools to enhance their functionality and performance. These accessories can include items such as cutting tools, tool holders, workholding devices, measuring instruments, lubrication systems, and other components that are essential for the operation and maintenance of machine tools.

The purpose of NATO Supply Class 3460 is to provide a standardized classification system for machine tool accessories within the NATO military alliance. This classification system helps to streamline procurement processes and ensure compatibility and interoperability among different NATO member countries.

By categorizing machine tool accessories under NATO Supply Class 3460, it becomes easier for military organizations and defense contractors to identify, source, and procure the necessary accessories for their metalworking machinery. This classification system also facilitates inventory management and logistics planning for military operations involving metalworking machinery.

In summary, NATO Supply Class 3460 for Machine Tool Accessories in NATO Supply Group 34 for Metalworking Machinery is a classification system that helps to organize and standardize the procurement and use of machine tool accessories within the NATO military alliance.

FSC 3460 Machine Tool accessories - Germany (DE)

Excludes Abrasive Wheels, Cones, and other Abrasive Attachments for use only on Hand Held Power Tools.

Frequently Asked Questions(FAQ) for Federal Supply Class 3460

What is Federal Supply Class 3460?: FSC 3460 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 3460) in the USA for supply items codified in the category of Machine Tool accessories.
What is NATO Supply Classification Class 3460?: NSC 3460 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 3460 in the USA) for supply items codified in the category of Machine Tool accessories.
Which Federal Supply Group is FSC 3460 in?: FSC 3460 is in Federal Supply Group (FSG) 34 which contains Metalworking Machinery.
Which NATO Supply Classification Group is NSC 3460 in?: NSC 3460 is in NATO Supply Classification Group (NSG) 34 which contains Metalworking Machinery.

Supply Items Included in Federal Supply Class 3460

What is an Abrasive Wheel? 75 Items: An Abrasive Wheel (WHEEL,ABRASIVE) is a rigid piece of abrasive with or without mounting facilities. Items having such mounting facilities as a fixed spindle, a threaded insert, or an arbor hole are designed for mounting on a grinding machine, tool chuck or mandrel. Items without mounting facilities are designed to be secured in a wheel holder by means of spring clamps.
What is a V-Block? 21 Items: A V-Block is a fixture of cast iron or steel, precision ground, having one or more V grooves machined parallel and squared with respect to the bottom, top, and ends. The block may have milled grooves on the sides to accommodate clamps which are used for holding cylindrical work.
What is a Machine Table Vise? 57 Items: A Machine Table Vise (VISE,MACHINE TABLE) is a clamping device consisting of a base and two jaws for use on a drilling machine, milling machine, grinding machine and the like. The base may be of stationary type or may be designed for angular adjustment. It may be bolt, screw, or strap clamp mounted or flat surface for resting upon the machine table. Excludes VISE, BENCH AND MACHINE TABLE.
What is a Grinding-Buffing-Wire Brush Wheel Arbor? 19 Items: A Grinding-Buffing-Wire Brush Wheel Arbor (ARBOR,WHEEL,GRINDING-BUFFING-WIRE BRUSH) is a bar of steel, machined or ground, with flange(s) and/or steel nut or machine screw. Used with drill chucks, lathe chucks, machine shafts and the like for mounting abrasive wheels, buffing wheels and wire wheels. See also ADAPTER, SPINDLE, PORTABLE SANDER.
What is a Straight Shank Tool Socket? 67 Items: A Straight Shank Tool Socket (SOCKET,STRAIGHT SHANK TOOL) is a machine socket adapter for extending the length of tool sockets and/or for converting the size of sockets to size of straight tool shanks.
What is a Taper Shank Tool Socket? 55 Items: A Taper Shank Tool Socket (SOCKET,TAPER SHANK TOOL) is a machine socket adapter for extending the length of tool sockets and/or for converting the size of sockets to size of taper tool shanks.
What is a Lathe Center? 45 Items: A Lathe Center (CENTER,LATHE) is a device having a straight or tapered shank with a shaped head used as a bearing or support for the work.
What is a Drill Chuck? 116 Items: A Drill Chuck (CHUCK,DRILL) is an accessory for holding tools with a plain cylindrical shank such as drills, taps, or the like, by means of two or more internal selfcentering (universal) jaws. It may be attached directly to the spindle of a machine, arbor, shaft, hand mechanism, or the like without the use of centers. The jaws are simultaneously adjusted by an adjusting nut, sleeve, feed screw, or the like. The maximum rated capacity of this item is one (1) inch (25.4 mm) diameter. For universal chucks having a capacity in excess of one (1) inch (25.4 mm), see CHUCK, UNIVERSAL JAW. Excludes CHUCK, CENTERING, LATHE.
What is a Machine Collet? 322 Items: A Machine Collet (COLLET,MACHINE) is a work holding device consisting of a longitudinally slotted sleeve which has a tapering or conical end designed to fit into a corresponding taper of a chuck so that the lengthwise movement of the sleeve causes a contraction or expansion of the gripping surfaces. The gripping or holding tension is actuated by a backward pull (draw in) or by a forward push (force in). Used on lathes, milling machines, screw machines and the like. Excludes SOCKET, STRAIGHT SHANK TOOL and SOCKET, TAPER SHANK TOOL.
What is a Lathe Dog? 31 Items: A Lathe Dog (DOG,LATHE) is a machine tool accessory used as a clamp for gripping a piece of work and conveying motion to it from the face plate.
What is an Universal Jaw Chuck? 27 Items: An Universal Jaw Chuck (CHUCK,UNIVERSAL JAW) is an accessory used for holding objects directly to the spindle of a machine, arbor, shaft, or the like, without the use of centers. Two or more self-centering jaws are adjusted simultaneously, usually by rotation of a scroll gear which engages slots or teeth in the back of the jaws. Maximum rated capacity is in excess of one (1) inch (25.4 mm) diameter. For universal chucks having a maximum capacity of one (1) inch (25.4 mm) or less, see CHUCK, DRILL. Excludes CHUCK, CENTERING, LATHE.
What is a Cutting Tool Holder? 150 Items: A Cutting Tool Holder (HOLDER,CUTTING TOOL) is an accessory designed to hold and support cutter bits or sleeve type boring bars of various types and sizes. It is used on lathes, automatic machines, planers, and shapers. Excludes items such as tool posts.
What is a Counterbore Pilot? 19 Items: A Counterbore Pilot (PILOT,COUNTERBORE) is excludes PILOT, COUNTERSINK.
What is a Countersink Pilot? 15 Items: A Countersink Pilot (PILOT,COUNTERSINK) is a device specifically designed for use in conjunction with a HOLDER, COUNTERSINK to guide and align countersink cutters. Excludes PILOT, COUNTERBORE.
What is a Solid Machine Mandrel? 28 Items: A Solid Machine Mandrel (MANDREL,MACHINE,SOLID) is a cylindrical-shaped tool with a slight taper on the over-all length, centered on each end with a flat milled on the ends for a holder. It is used for holding work for machining operations on lathes and milling machines.
What is a Milling Cutter Arbor? 38 Items: A Milling Cutter Arbor (ARBOR,MILLING CUTTER) is a bar of special steel, machined and ground, having a standard milling machine, Morse or Brown and Sharpe taper shank and furnished with or without bearing sleeves. It is used for mounting plain hole milling cutters of various types and sizes.
What is a Shell End Mill Arbor? 14 Items: A Shell End Mill Arbor (ARBOR,SHELL END MILL) is a bar of special steel, machined and ground, having a standard milling machine or a Brown and Sharpe tapered shank. The body ends are ground to various diameters for mounting the different sizes of shell and mill cutters. It is used with adapters on milling machines having standardized spindle end and Brown and Sharpe milling machines having taper-nose or threaded spindles.
Arbor,Drill Chuck 30 Items
What is a Buffing Wheel? 18 Items: A Buffing Wheel (WHEEL,BUFFING) is a disk shaped item of loose, bonded, or solid construction having an arbor hole for attaching to a rotary power-operated tool or machine. It may be fabricated of a single piece of felt, rubber, leather, cork, or the like; a single piece of wood, leather covered; or plies of muslin, flannel, canvass, or the like sewed or cemented together. It is used for buffing and/or polishing or burnishing. Excludes BRUSH, ROTARY (as modified); WHEEL, ABRASIVE; and PAD, POLISHING AND RUBBING.
What is a Drill Chuck Key? 16 Items: A Drill Chuck Key (KEY,DRILL CHUCK) is a hand tool designed for tightening or loosening the jaws of a drill chuck.
Collet Set,Machine 12 Items
What is an Indexing Fixture? 10 Items: An Indexing Fixture is an item designed to accurately select any degree of angle for milling, grinding, drilling, or boring operations. It is not furnished with a work-holding device such as a chuck or vise. It may be furnished with centers. It may be of the automatic angle selector type, manual (perforated disk) angle selector type, or optical system positioning type. It may consist of two units (a head and a tail-stock). Excludes HOLDING FIXTURE, COLLET CHUCKING, MACHINE.
What is a Tube Bending Mandrel? 41 Items: A Tube Bending Mandrel (MANDREL,TUBE BENDING) is a tool that may be either flexible or rigid, designed to be inserted into a tube or hollow section to support the wall and prevent it from flattening or collapsing during bending operations. It is used with a BENDING MACHINE, PIPE AND CONDUIT.
What is a Positioning Table? 13 Items: A Positioning Table (TABLE,POSITIONING) is an item designed to accurately position another item for inspection, testing, maintenance or machining. The item is capable of linear and/or rotational movement but is not furnished with a work-holding device such as a chuck or vise. It may be manually operated or motor driven. Excludes POSITIONER, WELDING.
What is a Hold Down Machine Clamp? 39 Items: A Hold Down Machine Clamp (CLAMP,MACHINE,HOLD DOWN) is a clamp for holding down work on planer, punch presses, milling machines, boring mills, drill presses and the like.
What is a Metalworking Machinery Fixture? 17 Items: A Metalworking Machinery Fixture (FIXTURE,METALWORKING MACHINERY) is an item mounted on a machine table and designed for clamping and releasing a workpiece in volume production. The item may operate as a vertical or horozontal fixture, depending on the induvidual design type.
Holder Section,Cutting Tool 21 Items
What is a Counterbore And Countersink Pilot? 25 Items: A Counterbore And Countersink Pilot (PILOT,COUNTERBORE AND COUNTERSINK) is an item designed for guiding a COUNTERBORE, MACHINE or COUNTERSINK which are used for counterboring or countersinking holes in a workpiece.
What is an Universal Jaw Chuck Jaw Set? 11 Items: An Universal Jaw Chuck Jaw Set (JAW SET,CHUCK,UNIVERSAL JAW) is two or more opposable parts that open and close for holding something between them. Designed to be used with a CHUCK, UNIVERSAL JAW.
What is a Lathe Steady Rest? 13 Items: A Lathe Steady Rest (STEADY REST,LATHE) is an accessory, with one or more friction or roller type adjustable jaws, designed to support round material during the machining process. It may be bed or carriage mounted.
What is a Collet Chuck? 11 Items: A Collet Chuck (CHUCK,COLLET) is an item designed to be adapted to a machine spindle to accommodate a collet for holding work to be machined. It may be mounted directly to the spindle or to an arbor or adapter which in turn mounts to the spindle. The chuck is manipulated to contract or expand the collet which in turn grips or releases the work. Excludes HOLDING FIXTURE, COLLET CHUCKING, MACHINE.

Stock Items From Supply Class 3460 Page 4 of 4

3460-12-199-6672
Counterbore And Countersink Pilot

121996672
GZ 110 430: RNCC: 3 | RNVC: 2
GZ110430: RNCC: 3 | RNVC: 2

19 May 1984

3460-12-121-5797
Lathe Dog

121215797
522J003-80MM: RNCC: 3 | RNVC: 2
522J00380MM: RNCC: 3 | RNVC: 2

30 May 1969

3460-12-176-9793
Counterbore Pilot

121769793
105-42121W3.03: RNCC: 3 | RNVC: 2
105-42121W3-03: RNCC: 5 | RNVC: 2

3 Jan 1979

3460-12-339-1677
Drill Chuck

123391677
2608572021: RNCC: 3 | RNVC: 2
2 608 572 021: RNCC: 5 | RNVC: 9

20 Oct 1995

3460-12-126-1091
Drill Chuck Arbor

121261091
DIN238-B16X3: RNCC: 2 | RNVC: 2
014912: RNCC: 3 | RNVC: 2
B16X3DIN238: RNCC: 5 | RNVC: 2
236-B16-MK3: RNCC: 5 | RNVC: 9

30 May 1969

3460-12-126-4539
Cutting Tool Holder

121264539
H05 25120: RNCC: 3 | RNVC: 2
B10: RNCC: 5 | RNVC: 2
17215010: RNCC: 5 | RNVC: 9
17215B10: RNCC: 5 | RNVC: 9
1270B10: RNCC: 5 | RNVC: 9
23590 B10: RNCC: 5 | RNVC: 9
B10HALTER: RNCC: 5 | RNVC: 9
18202102: RNCC: 5 | RNVC: 9

30 May 1969

3460-12-315-0980
Milling Cutter Arbor

123150980
DIN6354-B40X22X400: RNCC: 2 | RNVC: 2
12621-B: RNCC: 3 | RNVC: 2
B40X22X400-DIN6354: RNCC: 5 | RNVC: 2

15 Sep 1988

3460-12-158-3459
Machine Table Vise

121583459
M65: RNCC: 3 | RNVC: 2

30 May 1969

3460-12-199-5512
Taper Shank Tool Socket

121995512
268-017090: RNCC: 3 | RNVC: 2
268-17090: RNCC: 5 | RNVC: 2
017090: RNCC: 5 | RNVC: 2
268 MK2-2/200: RNCC: 5 | RNVC: 9

10 May 1984

3460-12-300-5690
Tube Bending Mandrel

123005690
3-4INX0-049: RNCC: 3 | RNVC: 2

16 Aug 1984

3460-12-126-5060
Abrasive Wheel

121265060
M13-104NK60MKE: RNCC: 3 | RNVC: 2

30 May 1969

3460-12-307-7459
Universal Jaw Chuck

123077459
633-106498: RNCC: 3 | RNVC: 2
106498: RNCC: 5 | RNVC: 2
633 3-B 400-8: RNCC: 5 | RNVC: 9

22 Jul 1986

3460-12-129-7709
Machine Collet

121297709
0Z294X4-0MM: RNCC: 3 | RNVC: 2
5B3-4: RNCC: 5 | RNVC: 9

30 May 1969

3460-12-130-9842
Drill Chuck

121309842
6DIN6349: RNCC: 2 | RNVC: 2
72809: RNCC: 3 | RNVC: 2

30 May 1969

3460-12-306-4288
Machine Collet

123064288
565 513: RNCC: 3 | RNVC: 9

28 Feb 1986

3460-12-352-7205
Drill Chuck

123527205
3.37100R720: RNCC: 3 | RNVC: 2

8 Dec 2000

3460-12-352-3708
Werkzeug Spanndorn

123523708
908002481: RNCC: 3 | RNVC: 2

13 Nov 2000

3460-12-325-3382
Straight Shank Tool Socket

123253382
8211-E-10,0-MK-B3: RNCC: 3 | RNVC: 9

27 May 1991

3460-12-362-0156
Machine Collet

123620156
DIN6388-A25X15,0: RNCC: 2 | RNVC: 2
444E-15,0: RNCC: 3 | RNVC: 2
444E-15.0: RNCC: 5 | RNVC: 2

16 Dec 2003

3460-12-304-1398
Collet Chuck

123041398
9.2001.27.00.01.00: RNCC: 3 | RNVC: 2
1801 035: RNCC: 5 | RNVC: 9
1801035: RNCC: 5 | RNVC: 9

13 Jun 1985

3460-12-346-4057
Cutting Tool Holder

123464057
LSASR-1616H16: RNCC: 3 | RNVC: 2
LSASR1616H16: RNCC: 5 | RNVC: 2

21 Jul 1998

3460-12-328-1218
Milling Cutter Arbor

123281218
DIN6354-A50X27X400: RNCC: 2 | RNVC: 2
12642FORMA: RNCC: 3 | RNVC: 2
12642-A: RNCC: 5 | RNVC: 2

8 Apr 1992

3460-12-129-8145
Machine Table Vise

121298145
MSO 707: RNCC: 3 | RNVC: 2
4932.332.763: RNCC: 5 | RNVC: 2
936-225-269: RNCC: 5 | RNVC: 2
CEKABAB01: RNCC: 5 | RNVC: 9
932-238-620: RNCC: 5 | RNVC: 9
526A002: RNCC: 5 | RNVC: 9
238620: RNCC: 5 | RNVC: 9

30 May 1969

3460-12-328-0217
Machine Collet

123280217
5.0601.01.01.01.60: RNCC: 3 | RNVC: 2
9001 605-16MM: RNCC: 5 | RNVC: 9
9001605-160: RNCC: 5 | RNVC: 9

31 Mar 1992

3460-12-137-2678
Lathe Center

121372678
601N-042171: RNCC: 3 | RNVC: 2
042171: RNCC: 5 | RNVC: 2
601N-108 MK4: RNCC: 5 | RNVC: 2
601-108N: RNCC: 5 | RNVC: 9
4-6-01-08-04: RNCC: 5 | RNVC: 9
601N-42171: RNCC: 5 | RNVC: 9
601-42171: RNCC: 5 | RNVC: 9

30 May 1969

3460-12-302-9779
Machine Collet

123029779
5.0601.01.01.00.20: RNCC: 3 | RNVC: 2
9001 605-2MM: RNCC: 5 | RNVC: 9

13 Feb 1985

3460-12-126-5817
Abrasive Wheel

121265817
DIN69120-A175X25X20-EK46M4KE: RNCC: 2 | RNVC: 2
175X25X20ADIN69120EK46M4KE: RNCC: 5 | RNVC: 9

30 May 1969

3460-12-325-3368
Straight Shank Tool Socket

123253368
8211-E-3,5-MK-B1: RNCC: 3 | RNVC: 9

27 May 1991

3460-12-353-4182
Drill Chuck

123534182
1 608 571 062: RNCC: 3 | RNVC: 2

21 Mar 2001

3460-12-121-6491
Drill Chuck

121216491
DIN6349-13: RNCC: 2 | RNVC: 2
111-072815: RNCC: 3 | RNVC: 2
072815: RNCC: 5 | RNVC: 2
111-13-B16: RNCC: 5 | RNVC: 2
13 DIN 6349: RNCC: 5 | RNVC: 2
72815: RNCC: 5 | RNVC: 9
72816: RNCC: 5 | RNVC: 9
13DIN6349: RNCC: 5 | RNVC: 9

30 May 1969

3460-12-309-8638
Drill Chuck Arbor

123098638
NO PRIMARY REF 12-309-8638: RNCC: 3 | RNVC: 2
932-267-110: RNCC: 5 | RNVC: 9
932-339-764: RNCC: 5 | RNVC: 9

12 Mar 1987

3460-12-126-1068
Lapping Block

121261068
TL3470-0005-40: RNCC: 2 | RNVC: 2
3470-0005-40: RNCC: 5 | RNVC: 9
3470-005-40: RNCC: 5 | RNVC: 9

30 May 1969

3460-12-315-6476
Machine Collet

123156476
19092: RNCC: 3 | RNVC: 2

16 Nov 1988

3460-12-141-1628
Abrasive Wheel

121411628
DIN69149-B125-EK60N4KE: RNCC: 2 | RNVC: 2
B125DIN69149EK60N4KE: RNCC: 5 | RNVC: 9

30 May 1969

3460-12-371-0201
Unterdr Saugplatte

123710201
4-011-11-0192: RNCC: 3 | RNVC: 2

25 Jan 2007

3460-12-124-2014

3460-12-199-6679
Counterbore And Countersink Pilot

121996679
GZ 110 640: RNCC: 3 | RNVC: 2
GZ110640: RNCC: 3 | RNVC: 2

19 May 1984

3460-12-126-6666
Matched V-Block Set

121266666
35185-5-30MM: RNCC: 3 | RNVC: 2
70872-1: RNCC: 3 | RNVC: 2

30 May 1969

3460-12-130-2928
Cutting Tool Holder

121302928
H02 25000: RNCC: 3 | RNVC: 2
M016: RNCC: 5 | RNVC: 2

30 May 1969

3460-12-159-2602
Matched V-Block Set

121592602
4619-51003-100: RNCC: 3 | RNVC: 2

30 May 1969

3460-12-130-5565
Abrasive Wheel

121305565
DIN69120-A300X40X76-NK80: RNCC: 2 | RNVC: 2
300X40X76ADIN69120NK80: RNCC: 5 | RNVC: 2

30 May 1969

3460-12-130-7089
Grinding-Buffing-Wire Brush Wheel Arbor

121307089
124-117: RNCC: 3 | RNVC: 2
T12M23: RNCC: 5 | RNVC: 2

30 May 1969

3460-12-342-3073
Cutting Tool Holder

123423073
637.161: RNCC: 3 | RNVC: 2
637161: RNCC: 5 | RNVC: 2

21 Jan 1997

3460-12-121-6492
Drill Chuck

121216492
72808: RNCC: 3 | RNVC: 2
109495: RNCC: 5 | RNVC: 2
64236018: RNCC: 5 | RNVC: 2
120P6B10: RNCC: 5 | RNVC: 2
6DIN6349: RNCC: 5 | RNVC: 9

30 May 1969

3460-12-306-4283
Machine Collet

123064283
565 518: RNCC: 3 | RNVC: 9

28 Feb 1986

3460-12-310-1214
Cylinder Hone Stone And Holder

123101214
VG95211-ML-123101214: RNCC: 2 | RNVC: 2
MH19: RNCC: 3 | RNVC: 2

8 Apr 1987

3460-12-325-3371
Straight Shank Tool Socket

123253371
8211-E-5,0-MK-B1: RNCC: 3 | RNVC: 9

27 May 1991

3460-12-176-6941
Counterbore Pilot

121766941
105-45361W1.03: RNCC: 3 | RNVC: 2
105-45361W1-03: RNCC: 5 | RNVC: 2

13 Dec 1978

3460-12-306-2313
Machine Table Vise

123062313
744RB-129062: RNCC: 3 | RNVC: 2
129062: RNCC: 5 | RNVC: 2
744 RB-129062: RNCC: 5 | RNVC: 2
744-RB-129062: RNCC: 5 | RNVC: 2
744RB 2 113: RNCC: 5 | RNVC: 2

7 Feb 1986

3460-12-126-5058
Abrasive Wheel

121265058
DIN69120-A20X10X8-NK50M4KE: RNCC: 2 | RNVC: 2
20X10X8ADIN69120NK50M4KE: RNCC: 5 | RNVC: 9

30 May 1969

3460-12-311-0478
Lathe Center

123110478
DIN806-H MORSE 2: RNCC: 2 | RNVC: 2
H MORSE 2 DIN806: RNCC: 2 | RNVC: 2

21 Jul 1987

3460-12-306-5237
Lathe Center

123065237
6550451: RNCC: 3 | RNVC: 9
565 030: RNCC: 5 | RNVC: 9

6 Mar 1986

3460-12-180-3926
Metalworking Lathe Faceplate

121803926
3801002: RNCC: 3 | RNVC: 9

7 Sep 1979

3460-12-130-4826

3460-12-301-3439
Cutting Tool Holder

123013439
DB 704: RNCC: 3 | RNVC: 2

6 Oct 1984

3460-12-332-5113
Cutting Tool Holder

123325113
6.11311R001: RNCC: 3 | RNVC: 2

18 Aug 1993

3460-12-126-1046
Drill Chuck

121261046
DIN6349-A10PXB16: RNCC: 2 | RNVC: 2
6 32 02 004 01 2: RNCC: 3 | RNVC: 2
72681: RNCC: 3 | RNVC: 2
63202004012: RNCC: 5 | RNVC: 2
10DIN6349: RNCC: 5 | RNVC: 2
DIN6349-10: RNCC: 5 | RNVC: 2

30 May 1969

3460-12-176-6939
Counterbore Pilot

121766939
105-42322W2.03: RNCC: 3 | RNVC: 2
105-42322W2-03: RNCC: 5 | RNVC: 2

13 Dec 1978

3460-12-357-7462
Hold Down Machine Clamp

123577462
317/5: RNCC: 3 | RNVC: 2

18 Jul 2002

3460-12-306-3455
Cutting Tool Holder

123063455
565 210: RNCC: 3 | RNVC: 9
565 210: RNCC: 5 | RNVC: 9
6550736: RNCC: 5 | RNVC: 9
6550736: RNCC: 5 | RNVC: 9

20 Feb 1986

3460-12-392-5726
Universal Work Holder

123925726
1053: RNCC: 3 | RNVC: 2

19 Jun 2013

3460-12-334-1587
Cutting Tool Holder

123341587
10114: RNCC: 3 | RNVC: 2
10114: RNCC: 5 | RNVC: 2

5 Apr 1994

3460-12-384-2864
Hole Saw Arbor

123842864
5503: RNCC: 3 | RNVC: 2

9 Feb 2011

3460-12-356-4658
Hold Down Machine Clamp

123564658
P403-2S: RNCC: 3 | RNVC: 2

4 Mar 2002

3460-12-130-7088
Grinding-Buffing-Wire Brush Wheel Arbor

121307088
124-559: RNCC: 3 | RNVC: 2
124.559: RNCC: 3 | RNVC: 2
932-121-774: RNCC: 3 | RNVC: 9
RL9-1-50: RNCC: 5 | RNVC: 2

30 May 1969

3460-12-376-0627
Drill Chuck

123760627
3050623: RNCC: 3 | RNVC: 2

7 Aug 2008

3460-12-315-0992
Machine Collet

123150992
51002-16: RNCC: 3 | RNVC: 2

15 Sep 1988

3460-12-352-7206
Drill Chuck

123527206
3.37120R732: RNCC: 3 | RNVC: 2

8 Dec 2000

3460-12-120-7519
Drill Chuck Arbor

121207519
DIN238-B16X1: RNCC: 2 | RNVC: 2
63301006005: RNCC: 3 | RNVC: 2
236-00-014899: RNCC: 3 | RNVC: 2
91533501: RNCC: 5 | RNVC: 2
236-00 B16 MK1: RNCC: 5 | RNVC: 2
014899: RNCC: 5 | RNVC: 2
B16X1DIN238: RNCC: 5 | RNVC: 9
117036: RNCC: 5 | RNVC: 9
14899: RNCC: 5 | RNVC: 9

30 May 1969

3460-12-163-3696
Tube Bending Mandrel

121633696
1-4INX0-035: RNCC: 3 | RNVC: 2
1-11-2529: RNCC: 5 | RNVC: 2

30 May 1969

3460-12-391-9722
Werkst Klemmensatz

123919722
83899: RNCC: 3 | RNVC: 2
6532-M12X14: RNCC: 5 | RNVC: 2

23 Apr 2013

3460-12-340-1189
Drill Chuck

123401189
249804: RNCC: 3 | RNVC: 2
141-249804: RNCC: 5 | RNVC: 2
1 618 571 026: RNCC: 5 | RNVC: 2
2 608 572 066: RNCC: 5 | RNVC: 2

1 Mar 1996

3460-12-306-3439
Machine Collet

123063439
565 506: RNCC: 3 | RNVC: 9
565 506: RNCC: 5 | RNVC: 9
6551708: RNCC: 5 | RNVC: 9
6551708: RNCC: 5 | RNVC: 9

20 Feb 1986

3460-12-318-9075
Tube Bending Mandrel

123189075
5-06-100-000-40104: RNCC: 3 | RNVC: 2

24 Aug 1989

3460-12-315-6469
Machine Collet

123156469
18942: RNCC: 3 | RNVC: 2

16 Nov 1988

3460-12-370-5216
Hold Down Machine Clamp

123705216
7804982626AA: RNCC: 3 | RNVC: 2

16 Nov 2006

3460-12-131-5789
Abrasive Wheel

121315789
DIN69120-A200X32X51-SC80H6KE: RNCC: 2 | RNVC: 2
200X32X51ADIN69120SC80H6KE: RNCC: 5 | RNVC: 9

30 May 1969

3460-12-340-4483
Straight Shank Tool Socket

123404483
DIN6359-A-A30XB6: RNCC: 2 | RNVC: 2
DIN6359-30X6: RNCC: 5 | RNVC: 9

16 Apr 1996

3460-12-165-8919
Buffing Wheel

121658919
DIN2251-175X40X30: RNCC: 2 | RNVC: 2
175X40X30DIN2251: RNCC: 5 | RNVC: 2

13 Jul 1976

3460-12-129-9873
Lathe Dog

121299873
22215-10: RNCC: 3 | RNVC: 2
522J002-80MM: RNCC: 3 | RNVC: 2

30 May 1969

3460-12-304-1198
Metalworking Lathe Faceplate

123041198
5.0610.03.04.52.30: RNCC: 3 | RNVC: 2
1801 031: RNCC: 5 | RNVC: 9

12 Jun 1985

3460-12-357-8304
Machine Table Vise

123578304
9.3073.0203: RNCC: 3 | RNVC: 2

30 Jul 2002

3460-12-151-5187
Machine Collet

121515187
142892: RNCC: 3 | RNVC: 2

30 May 1969

3460-12-129-7598
Machine Collet Set

121297598
NO PRIMARY REF 12-129-7598: RNCC: 3 | RNVC: 2
21B: RNCC: 5 | RNVC: 9

30 May 1969

3460-12-379-0154
Horizontal Milling Machine Universal Head

123790154
F2238CE.C.063.Z02.034: RNCC: 3 | RNVC: 2

15 Jun 2009

3460-12-137-4409
Shell End Mill Arbor

121374409
DIN2087-2X10X25: RNCC: 2 | RNVC: 2
2X10X25DIN2087: RNCC: 5 | RNVC: 9

30 May 1969

3460-12-307-3738
Drill Chuck

123073738
DIN6349-B10M-1/2-20UNF: RNCC: 2 | RNVC: 2

10 Jun 1986

3460-12-198-9724
V-Block

121989724
3946 100X40MM: RNCC: 3 | RNVC: 2

16 Mar 1984

3460-12-184-3921
Independent-Universal Jaw Chuck

121843921
101187: RNCC: 3 | RNVC: 9
6550639: RNCC: 3 | RNVC: 9
6550639: RNCC: 5 | RNVC: 9

22 Jul 1980

3460-12-374-0417
Drill Chuck

123740417
2608572122: RNCC: 3 | RNVC: 2
3165140184847: RNCC: 5 | RNVC: 2

11 Jan 2008

3460-12-187-2188
Milling Cutter Arbor

121872188
DIN8836A5X30X125: RNCC: 2 | RNVC: 2

11 Mar 1981

3460-12-126-1067

3460-12-126-3907
Drill Chuck Key

121263907
DIN6349-S1: RNCC: 2 | RNVC: 2
026411: RNCC: 3 | RNVC: 2
49705906: RNCC: 5 | RNVC: 2
01500600: RNCC: 5 | RNVC: 2
108670: RNCC: 5 | RNVC: 2
S1 4/36: RNCC: 5 | RNVC: 2
4-6DIN6349: RNCC: 5 | RNVC: 2
DIN6349-4-6: RNCC: 5 | RNVC: 2
26411: RNCC: 5 | RNVC: 9

30 May 1969

3460-12-352-6169
Spannfu Spannbacke

123526169
360.635: RNCC: 3 | RNVC: 2

30 Nov 2000

3460-12-176-1645
Bench Centers

121761645
MAHR818-400MM: RNCC: 3 | RNVC: 2
MAHR818: RNCC: 5 | RNVC: 9

9 Nov 1978

3460-12-352-6171
Spannfu Spannbacke

123526171
360.632: RNCC: 3 | RNVC: 2

30 Nov 2000

3460-12-378-4112
Quick Change Chuck

123784112
63636300: RNCC: 3 | RNVC: 2

2 Apr 2009

3460-12-331-6661
Drill Chuck

123316661
136-020061: RNCC: 3 | RNVC: 2
020061: RNCC: 5 | RNVC: 2
136-16-B18: RNCC: 5 | RNVC: 9

4 Jun 1993

3460-12-198-9726
V-Block

121989726
3946 200X70MM: RNCC: 3 | RNVC: 2

16 Mar 1984

3460-12-376-3811
Polishing And Rubbing Pad

123763811
493846: RNCC: 3 | RNVC: 2
PS-STF-D150X30-G/5: RNCC: 5 | RNVC: 2

22 Sep 2008

3460-12-152-2963
Machine Collet

121522963
6 32 07 069 00 5: RNCC: 3 | RNVC: 2
63207069005: RNCC: 5 | RNVC: 2
MZ10-69: RNCC: 5 | RNVC: 2
297: RNCC: 5 | RNVC: 9

30 May 1969

3460-12-131-5787
Abrasive Wheel

121315787
DIN69120-A200X32X51-SC80JOTKE: RNCC: 2 | RNVC: 2
200X32X51ADIN69120SC80J0TKE: RNCC: 5 | RNVC: 9

30 May 1969

3460-12-317-7787
Werkzeug Spanndorn

123177787
HK 23 691 512: RNCC: 3 | RNVC: 9
23691512: RNCC: 5 | RNVC: 9

11 May 1989

3460-12-177-7729
Taper Shank Tool Socket

121777729
H1502: RNCC: 3 | RNVC: 2

19 Feb 1979

3460-12-163-1819
Spannvorrichtung

121631819
605M: RNCC: 3 | RNVC: 2

30 May 1969

3460-12-325-3389
Straight Shank Tool Socket

123253389
8211-E-13,5-MK-B3: RNCC: 3 | RNVC: 9

27 May 1991

3460-12-315-0999
Solid Machine Mandrel

123150999
DIN6358-40X16X27: RNCC: 2 | RNVC: 2
12205: RNCC: 3 | RNVC: 2

15 Sep 1988

3460-12-302-9523
Cutting Tool Holder Section

123029523
178.E20.80-123: RNCC: 3 | RNVC: 2

12 Feb 1985

3460-12-304-5000
Machine Collet

123045000
DIN6388-A16X10,0: RNCC: 2 | RNVC: 2
OZ 1834-10,0: RNCC: 3 | RNVC: 2
410E-10,0: RNCC: 5 | RNVC: 2
1805017/100: RNCC: 5 | RNVC: 2

24 Jul 1985

3460-12-133-4258
Machine Collet

121334258
030 016: RNCC: 3 | RNVC: 2
30016: RNCC: 3 | RNVC: 2
300-6MMD: RNCC: 5 | RNVC: 2

30 May 1969

3460-12-320-8326
Machinist's Parallel Clamp

123208326
51102520: RNCC: 3 | RNVC: 2
00614.055.0: RNCC: 3 | RNVC: 9
250A-13-1303: RNCC: 5 | RNVC: 2
250A-13-1303: RNCC: 5 | RNVC: 9
51102055: RNCC: 5 | RNVC: 9

21 Feb 1990

3460-12-304-4997
Machine Collet

123044997
DIN6388-A16X6,0: RNCC: 2 | RNVC: 2
OZ 1834-6,0: RNCC: 3 | RNVC: 2
410E-6,0: RNCC: 5 | RNVC: 2
1805017/060: RNCC: 5 | RNVC: 2

24 Jul 1985

3460-12-362-0166
Machine Collet

123620166
DIN6388-A25X25,0: RNCC: 2 | RNVC: 2
444E-25,0: RNCC: 3 | RNVC: 2
444E-25.0: RNCC: 5 | RNVC: 2

16 Dec 2003

3460-12-325-6641
Drill Chuck

123256641
144-033733: RNCC: 3 | RNVC: 2
144-33733: RNCC: 5 | RNVC: 2
033733: RNCC: 5 | RNVC: 2

26 Jun 1991

3460-12-163-3703
Tube Bending Mandrel

121633703
3-8INX0-028: RNCC: 3 | RNVC: 2
1-11-2533: RNCC: 5 | RNVC: 2

30 May 1969

3460-12-126-6671
Taper Shank Tool Socket

121266671
DIN2185-5X4: RNCC: 2 | RNVC: 2
21101.040: RNCC: 3 | RNVC: 2
262-017027: RNCC: 3 | RNVC: 2
017027: RNCC: 5 | RNVC: 2
262 MK5/4 171: RNCC: 5 | RNVC: 2
5X4DIN2185: RNCC: 5 | RNVC: 2
262-17027: RNCC: 5 | RNVC: 9

30 May 1969

3460-12-126-2973
Machinist's Parallel Clamp

121262973
51102040: RNCC: 3 | RNVC: 2

30 May 1969

3460-12-129-7479
Drill Chuck Arbor

121297479
DIN238-B12X1: RNCC: 2 | RNVC: 2
014898: RNCC: 3 | RNVC: 2
B12X1DIN238: RNCC: 5 | RNVC: 2

30 May 1969

3460-12-177-7790
Drill Chuck

121777790
1608571022: RNCC: 3 | RNVC: 2
111S-064530: RNCC: 3 | RNVC: 2
064530: RNCC: 5 | RNVC: 2
1608571022: RNCC: 5 | RNVC: 2
111-13S-1/2-20: RNCC: 5 | RNVC: 9
115S64530: RNCC: 5 | RNVC: 9
64530: RNCC: 5 | RNVC: 9

19 Feb 1979

3460-12-368-0705
Machine Table Vise

123680705
HD 1020/125: RNCC: 3 | RNVC: 2
1020/125: RNCC: 5 | RNVC: 2
ALLMATIC HD1020/125 125MM BEK: RNCC: 5 | RNVC: 2

30 Nov 2005

3460-12-336-6824
Maschinenre Halter

123366824
21183040: RNCC: 3 | RNVC: 9

7 Dec 1994

3460-12-130-5208
We Aufspann- Bolzen

121305208
012C104: RNCC: 3 | RNVC: 2

30 May 1969

3460-12-373-6654
Boring Head

123736654
63.4025TOEM: RNCC: 3 | RNVC: 2

26 Nov 2007

3460-12-385-8375
Machine Table Vise

123858375
125010: RNCC: 3 | RNVC: 2
PMS 50: RNCC: 5 | RNVC: 2

12 Jul 2011

3460-12-342-3075
Cutting Tool Holder

123423075
637.141: RNCC: 3 | RNVC: 2
637141: RNCC: 5 | RNVC: 2

21 Jan 1997

3460-12-318-9085
Tube Bending Mandrel

123189085
5-12-100-000-40402: RNCC: 3 | RNVC: 2

24 Aug 1989

3460-12-306-5244
Aufnahmena Flansch

123065244
346 500: RNCC: 3 | RNVC: 9

6 Mar 1986

3460-12-321-4981
Maschinenre Halter

123214981
311-00-017274: RNCC: 3 | RNVC: 2
017274: RNCC: 5 | RNVC: 2
F70001195: RNCC: 5 | RNVC: 2
17274: RNCC: 5 | RNVC: 9

25 May 1990

3460-12-300-6421
Hold Down Machine Clamp

123006421
NLM437-08: RNCC: 3 | RNVC: 2

18 Aug 1984

3460-12-328-4546
Machine Collet

123284546
5.0604.05.02.01.00: RNCC: 3 | RNVC: 2
9005982100: RNCC: 5 | RNVC: 9

21 May 1992

3460-12-325-3387
Straight Shank Tool Socket

123253387
8211-E-12,5-MK-B3: RNCC: 3 | RNVC: 9

27 May 1991

3460-12-304-4999
Machine Collet

123044999
DIN6388-A16X8,0: RNCC: 2 | RNVC: 2
OZ 1834-8,0: RNCC: 3 | RNVC: 2
410E-8,0: RNCC: 5 | RNVC: 2
1805017/080: RNCC: 5 | RNVC: 2

24 Jul 1985

3460-12-137-2677
Lathe Center

121372677
DIN806-MORSE 4: RNCC: 2 | RNVC: 2
665-013712: RNCC: 3 | RNVC: 2
013712: RNCC: 5 | RNVC: 2
665 MK4 160: RNCC: 5 | RNVC: 2
M0RSE4DIN806: RNCC: 5 | RNVC: 2
MORSE 4 DIN806: RNCC: 5 | RNVC: 2
32360-4: RNCC: 5 | RNVC: 9
4-6-65-04-60: RNCC: 5 | RNVC: 9
665MK4: RNCC: 5 | RNVC: 9

30 May 1969

3460-12-328-0008
V-Block

123280008
1402/5-30: RNCC: 3 | RNVC: 2
1402-5-30: RNCC: 5 | RNVC: 2
1402-5-30: RNCC: 5 | RNVC: 9
1402/5-30: RNCC: 5 | RNVC: 9

27 Mar 1992

3460-12-362-0162
Machine Collet

123620162
DIN6388-A25X21,0: RNCC: 2 | RNVC: 2
444E-21,0: RNCC: 3 | RNVC: 2
444E-21.0: RNCC: 5 | RNVC: 2

16 Dec 2003

3460-12-317-5446
Drill Chuck Key

123175446
307319: RNCC: 3 | RNVC: 2
62914010011: RNCC: 5 | RNVC: 2
S14 4/60: RNCC: 5 | RNVC: 2
1 607 950 053: RNCC: 5 | RNVC: 2
1607950053: RNCC: 5 | RNVC: 2
1-607-950-053: RNCC: 5 | RNVC: 9
85-695-2024: RNCC: 6 | RNVC: 9

18 Apr 1989

3460-12-325-3384
Straight Shank Tool Socket

123253384
8211-E-11,0-MK-B3: RNCC: 3 | RNVC: 9

27 May 1991

3460-12-132-0428
Adapter

121320428
WSSZ1-78: RNCC: 3 | RNVC: 2
WSSZ1-78: RNCC: 5 | RNVC: 9

30 May 1969

3460-12-130-6846
Independent Jaw Chuck

121306846
22525: RNCC: 3 | RNVC: 1
1593-340MMDA: RNCC: 5 | RNVC: 2

30 May 1969

3460-12-356-4659
Hold Down Machine Clamp

123564659
P400-2S: RNCC: 3 | RNVC: 2

4 Mar 2002

3460-12-141-1626
Abrasive Wheel

121411626
DIN69149-E100-EK60N4KE: RNCC: 2 | RNVC: 2
E100DIN69149EK60N4KE: RNCC: 5 | RNVC: 9

30 May 1969

3460-12-317-7772
Machine Collet Set

123177772
HK 23 291 054-087: RNCC: 3 | RNVC: 9
23291054-087: RNCC: 5 | RNVC: 9
351205K40: RNCC: 5 | RNVC: 9

11 May 1989

3460-12-320-0039
Spindel- Fuehrung

123200039
6900117-340000.03: RNCC: 2 | RNVC: 2
774-062-58: RNCC: 3 | RNVC: 2

27 Nov 1989

3460-12-317-3555
Schneide Unterlage

123173555
37990-120 MM: RNCC: 3 | RNVC: 2

31 Mar 1989

3460-12-325-3400
Straight Shank Tool Socket

123253400
8211-E-13,0-MK-B4: RNCC: 3 | RNVC: 9

27 May 1991

3460-12-311-3132
Expansion Mandrel Set

123113132
SP-A: RNCC: 3 | RNVC: 2

14 Aug 1987

3460-12-130-7087
Grinding-Buffing-Wire Brush Wheel Arbor

121307087
RL8-1: RNCC: 3 | RNVC: 2

30 May 1969

3460-12-168-5647
Machine Collet

121685647
C407-A41-B8: RNCC: 2 | RNVC: 2
C407-A41-B8: RNCC: 3 | RNVC: 2
C407A41B8: RNCC: 3 | RNVC: 2

23 Mar 1977

3460-12-325-3367
Straight Shank Tool Socket

123253367
8211-E-3,0-MK-B1: RNCC: 3 | RNVC: 9

27 May 1991

3460-12-325-3378
Straight Shank Tool Socket

123253378
8211-E-8,0-MK-B3: RNCC: 3 | RNVC: 9

27 May 1991

3460-12-339-5401
Machine Collet

123395401
5.0604.05.02.00.30: RNCC: 3 | RNVC: 2
9005 982 030: RNCC: 5 | RNVC: 9

4 Dec 1995

3460-12-140-5144
Abrasive Wheel

121405144
DIN69149-B175-EK60K5KE: RNCC: 2 | RNVC: 2
B175DIN69149EK60K5KE: RNCC: 5 | RNVC: 9

30 May 1969

3460-12-318-9097
Tube Bending Mandrel

123189097
5-16-200-000-40609: RNCC: 3 | RNVC: 2

24 Aug 1989

3460-12-304-4554
Automatic Reversing Tapping Chuck

123044554
DSPL 20/MK4: RNCC: 3 | RNVC: 2
DSPL 20/CM4: RNCC: 5 | RNVC: 2

18 Jul 1985

3460-12-325-3366
Straight Shank Tool Socket

123253366
8211-E-5,5-MK-B0: RNCC: 3 | RNVC: 9

27 May 1991

3460-12-179-4456
V-Block

121794456
EINZELPRISMA35155-150MM: RNCC: 3 | RNVC: 2
EINZELPRISMA70972GR2: RNCC: 3 | RNVC: 2

27 Jun 1979

3460-12-304-4785
Drill Chuck Arbor

123044785
036846: RNCC: 3 | RNVC: 2
236-20016: RNCC: 3 | RNVC: 2

23 Jul 1985

3460-12-342-4284
Straight Shank Tool Socket

123424284
DIN6359-B-AD40XB32: RNCC: 2 | RNVC: 2
040.140 32 100: RNCC: 3 | RNVC: 2
4.014.032.100: RNCC: 5 | RNVC: 9
DIN6359-B40X32: RNCC: 5 | RNVC: 9

6 Feb 1997

3460-12-325-3374
Straight Shank Tool Socket

123253374
8211-E-6,5-MK-B1: RNCC: 3 | RNVC: 9

27 May 1991

3460-12-379-1952
Cutting Tool Holder

123791952
AL25-22: RNCC: 3 | RNVC: 2

2 Jul 2009

3460-12-371-2153
Machine Collet

123712153
463589003400: RNCC: 3 | RNVC: 2

28 Feb 2007

3460-12-130-2929
Machine Table Vise

121302929
201001: RNCC: 3 | RNVC: 2
GROESZE 1 DREHBAR: RNCC: 5 | RNVC: 2
201 001: RNCC: 5 | RNVC: 9
201001: RNCC: 5 | RNVC: 9
GROESZE 1 DREHBAR: RNCC: 5 | RNVC: 9
30130A: RNCC: 5 | RNVC: 9

30 May 1969

3460-12-350-9465
Solid Machine Mandrel

123509465
7616-40-ER40-060: RNCC: 3 | RNVC: 2

8 Jun 2000

3460-12-137-0642
Drill Chuck Arbor

121370642
DIN238-B18X3: RNCC: 2 | RNVC: 2
B18X3DIN238: RNCC: 5 | RNVC: 2
21270183: RNCC: 5 | RNVC: 9
34260-3/18: RNCC: 5 | RNVC: 9

30 May 1969

3460-12-351-0246
Counterbore Pilot

123510246
855-5-3/32: RNCC: 3 | RNVC: 2

16 Jun 2000

3460-12-166-3755
Machine Collet

121663755
14913-03: RNCC: 3 | RNVC: 2
4913 1-8: RNCC: 5 | RNVC: 2
4913 1-8: RNCC: 5 | RNVC: 9

31 Aug 1976

3460-12-325-3362
Straight Shank Tool Socket

123253362
8211-E-3,5-MK-B0: RNCC: 3 | RNVC: 9

27 May 1991

3460-12-371-2543
Abrasive Wheel

123712543
80 T 350-3,0 A 30 L SG-TABLE: RNCC: 3 | RNVC: 2
4007220629130: RNCC: 5 | RNVC: 2

6 Mar 2007

3460-12-131-5788
Abrasive Wheel

121315788
DIN69120-A200X32X51-NK46K5KE: RNCC: 2 | RNVC: 2
200X32X51 A DIN69120 NK 46 K5KE: RNCC: 5 | RNVC: 9
200X32X51ADIN69120NK46K5KE: RNCC: 5 | RNVC: 9

30 May 1969

3460-12-321-9373
Straight Shank Tool Socket

123219373
DIN6328-A2X11: RNCC: 2 | RNVC: 2
F70000123: RNCC: 5 | RNVC: 2

11 Jul 1990

3460-12-304-5004
Machine Collet

123045004
DIN6388-A16X14,0: RNCC: 2 | RNVC: 2
OZ 1834-14,0: RNCC: 3 | RNVC: 2
410E-14,0: RNCC: 5 | RNVC: 2
1805017/140: RNCC: 5 | RNVC: 2

24 Jul 1985

3460-12-130-9652
Drill Chuck

121309652
87100467: RNCC: 3 | RNVC: 2
207: RNCC: 5 | RNVC: 2
SA-87100467: RNCC: 5 | RNVC: 2
30: RNCC: 5 | RNVC: 9

30 May 1969

3460-12-121-5786
Lathe Dog

121215786
522J002-10HM: RNCC: 3 | RNVC: 2
522J00210MM: RNCC: 3 | RNVC: 2
25103-101: RNCC: 3 | RNVC: 2

30 May 1969

3460-12-318-9079
Tube Bending Mandrel

123189079
5-08-100-000-40205: RNCC: 3 | RNVC: 2

24 Aug 1989

3460-12-140-8257
Abrasive Wheel

121408257
DIN69120-A200X20X32-EK46G8KE: RNCC: 2 | RNVC: 2
200X20X32ADIN69120EK46G8KE: RNCC: 5 | RNVC: 9

30 May 1969

3460-12-345-5130
Cutting Tool Holder

123455130
LSASL-2525M22: RNCC: 3 | RNVC: 2

25 Mar 1998

3460-12-352-7691
Cutting Tool Holder

123527691
MTJNR3225P16H4: RNCC: 3 | RNVC: 2

13 Dec 2000

3460-12-305-3866
Eindrueckwerkzeug

123053866
PRV105-405: RNCC: 3 | RNVC: 2
PRV105/2-0000-0000: RNCC: 5 | RNVC: 2
MAGERD 2656: RNCC: 5 | RNVC: 9

30 Oct 1985

3460-12-165-8911
Buffing Wheel

121658911
DIN2251-100X25X20: RNCC: 2 | RNVC: 2
100X25X20DIN2251: RNCC: 5 | RNVC: 2

13 Jul 1976

3460-12-129-9712
Lathe Center

121299712
DIN806-MORSE 3: RNCC: 2 | RNVC: 2
665-013711: RNCC: 3 | RNVC: 2
665 MK3 125: RNCC: 5 | RNVC: 2
013711: RNCC: 5 | RNVC: 2
M0RSE3DIN806: RNCC: 5 | RNVC: 2
32360-3: RNCC: 5 | RNVC: 9
4-6-65-03-60: RNCC: 5 | RNVC: 9
665MK3: RNCC: 5 | RNVC: 9

30 May 1969

3460-12-190-7484
Universal Jaw Chuck

121907484
DIN6350-D3X200X6-ST: RNCC: 2 | RNVC: 9
100156: RNCC: 3 | RNVC: 9
22386255: RNCC: 5 | RNVC: 9
D3X200X6 DIN 6350-ST: RNCC: 5 | RNVC: 9

10 Dec 1981

3460-12-319-4155
Schraub Spannbacke

123194155
6900117-340000.04: RNCC: 2 | RNVC: 2
774-062-57: RNCC: 3 | RNVC: 2

29 Sep 1989

3460-12-357-0009
Drill Chuck Arbor

123570009
018757: RNCC: 3 | RNVC: 2
KD236-00/CM3-B18: RNCC: 5 | RNVC: 2

23 Apr 2002

3460-12-369-2884
Straight Shank Tool Socket

123692884
300200-20MM: RNCC: 3 | RNVC: 2

14 Jun 2006

3460-12-362-0150
Machine Collet

123620150
DIN6388-A25X9,0: RNCC: 2 | RNVC: 2
444E-9,0: RNCC: 3 | RNVC: 2
444E-9.0: RNCC: 5 | RNVC: 2

16 Dec 2003

3460-12-325-3397
Straight Shank Tool Socket

123253397
8211-E-17,5-MK-B3: RNCC: 3 | RNVC: 9

27 May 1991

3460-12-129-3205
Machine Collet

121293205
NO PRIMARY REF 12-129-3205: RNCC: 3 | RNVC: 2
811-9MMD: RNCC: 5 | RNVC: 9

30 May 1969

3460-12-325-3403
Straight Shank Tool Socket

123253403
8211-E-16,0-MK-B4: RNCC: 3 | RNVC: 9

27 May 1991

3460-12-176-9792
Unterlage

121769792
105-42121W3.01: RNCC: 3 | RNVC: 2
105-42121W3-01: RNCC: 5 | RNVC: 2

3 Jan 1979

3460-12-357-8348
Universal Jaw Chuck Jaw Set

123578348
108581: RNCC: 3 | RNVC: 2
3/AB-140/160: RNCC: 5 | RNVC: 2

30 Jul 2002

3460-12-318-9104
Tube Bending Mandrel

123189104
5-25-080-000-40801: RNCC: 3 | RNVC: 2

24 Aug 1989

3460-12-133-7159
Hold Down Machine Clamp

121337159
14X100DIN6314: RNCC: 4 | RNVC: 1
DIN6314-14X100: RNCC: 5 | RNVC: 1

30 May 1969

3460-12-318-9094
Tube Bending Mandrel

123189094
5-16-150-000-40606: RNCC: 3 | RNVC: 2

24 Aug 1989

3460-12-351-0248
Counterbore Pilot

123510248
855-3-1/8: RNCC: 3 | RNVC: 2

16 Jun 2000

3460-12-126-3972
Lathe Center

121263972
601N-042310: RNCC: 3 | RNVC: 2
042310: RNCC: 5 | RNVC: 2
601N-104 MK3: RNCC: 5 | RNVC: 2
4-6-01-04-03: RNCC: 5 | RNVC: 9
601-104N: RNCC: 5 | RNVC: 9
601N-42310: RNCC: 5 | RNVC: 9
MILAU: RNCC: 5 | RNVC: 9

30 May 1969

3460-12-325-3392
Straight Shank Tool Socket

123253392
8211-E-15,0-MK-B3: RNCC: 3 | RNVC: 9

27 May 1991

3460-12-369-2881
Straight Shank Tool Socket

123692881
300200-14MM: RNCC: 3 | RNVC: 2

14 Jun 2006

3460-12-325-8921
Taper Shank Tool Socket

123258921
DIN2187-2X2: RNCC: 2 | RNVC: 2
275-029125: RNCC: 3 | RNVC: 2
34351-2-2: RNCC: 5 | RNVC: 2
2X2 DIN 2187: RNCC: 5 | RNVC: 2

18 Jul 1991

3460-12-343-2667
Cutting Tool Holder

123432667
22241.070: RNCC: 3 | RNVC: 2

27 May 1997

3460-12-196-6083
Milling-Grinding-Drilling-Slotting Attachment

121966083
3.2001.54.00.01.00: RNCC: 3 | RNVC: 1
1805007: RNCC: 5 | RNVC: 9
3416-10410: RNCC: 6 | RNVC: 9

21 Jul 1983

3460-12-317-7802
Machine Collet

123177802
HK 23 291 006: RNCC: 3 | RNVC: 9
23291006: RNCC: 5 | RNVC: 9

11 May 1989

3460-12-135-3652
V-Block

121353652
545A223-100: RNCC: 3 | RNVC: 2

30 May 1969

3460-12-351-9516
Machine Collet

123519516
2512: RNCC: 3 | RNVC: 2

20 Sep 2000

3460-12-126-6672
Lathe Center

121266672
DIN806-MORSE 5: RNCC: 2 | RNVC: 2
665-013715: RNCC: 3 | RNVC: 2
013715: RNCC: 5 | RNVC: 2
665 MK5 200: RNCC: 5 | RNVC: 2
M0RSE5DIN806: RNCC: 5 | RNVC: 2
MORSE 5 DIN806: RNCC: 5 | RNVC: 2
4-6-65-05-60: RNCC: 5 | RNVC: 9
665MK5: RNCC: 5 | RNVC: 9

30 May 1969

3460-12-129-4874
Shell End Mill Arbor

121294874
HF1-3-51X16MM: RNCC: 3 | RNVC: 2

30 May 1969

3460-12-129-7703

3460-12-335-9469
Drill Chuck

123359469
4932-339-629: RNCC: 3 | RNVC: 2
932 339 629: RNCC: 5 | RNVC: 2
932-339-629: RNCC: 5 | RNVC: 2

5 Oct 1994

3460-12-318-9095
Tube Bending Mandrel

123189095
5-16-175-000-40607: RNCC: 3 | RNVC: 2

24 Aug 1989

3460-12-336-7731
Taper Shank Tool Socket

123367731
DIN2185-6X3: RNCC: 2 | RNVC: 9
21101360: RNCC: 3 | RNVC: 9

21 Dec 1994

3460-12-309-2537
Drill Chuck Arbor

123092537
1618598094: RNCC: 3 | RNVC: 2
1 618 598 094: RNCC: 5 | RNVC: 2
1 618 598 094: RNCC: 5 | RNVC: 9

6 Jan 1987

3460-12-338-4365
Counterbore Pilot

123384365
855-8-3/16: RNCC: 3 | RNVC: 2

10 Jul 1995

3460-12-129-9725
Solid Machine Mandrel

121299725
22285DREHD0RN5-16INH7: RNCC: 3 | RNVC: 2

30 May 1969

3460-12-362-0149
Machine Collet

123620149
DIN6388-A25X8,0: RNCC: 2 | RNVC: 2
444E-8,0: RNCC: 3 | RNVC: 2
444E-8.0: RNCC: 5 | RNVC: 2

16 Dec 2003

3460-12-186-7616
Drill Chuck

121867616
DIN6349B8M3-8-24UNF: RNCC: 2 | RNVC: 2
111-072628: RNCC: 3 | RNVC: 2
111-8-3/8-24: RNCC: 5 | RNVC: 2
DIN6349B8M3-8IN24UNF: RNCC: 5 | RNVC: 2
072628: RNCC: 5 | RNVC: 2
72628: RNCC: 5 | RNVC: 9

2 Feb 1981

3460-12-308-9886
Schr Knebel Kappe

123089886
6900108-500.18: RNCC: 2 | RNVC: 2
774-051-90: RNCC: 5 | RNVC: 2

4 Dec 1986

3460-12-126-6669
Taper Shank Tool Socket

121266669
DIN2185-5X3: RNCC: 2 | RNVC: 2
262-017026: RNCC: 3 | RNVC: 2
017026: RNCC: 5 | RNVC: 2
262 MK5/3 156: RNCC: 5 | RNVC: 2
5X3DIN2185: RNCC: 5 | RNVC: 2
262-17026: RNCC: 5 | RNVC: 9

30 May 1969

3460-12-317-7790
Milling Cutter Arbor

123177790
HK 23 155 512: RNCC: 3 | RNVC: 9
23155512: RNCC: 5 | RNVC: 9

11 May 1989

3460-12-126-6670
Taper Shank Tool Socket

121266670
DIN2185-4X3: RNCC: 2 | RNVC: 2
4X3DIN2185: RNCC: 5 | RNVC: 2
131TYP262GR3: RNCC: 5 | RNVC: 9
3430GR4-3: RNCC: 5 | RNVC: 9
205075: RNCC: 5 | RNVC: 9
21101030: RNCC: 5 | RNVC: 9
521B003-4-3: RNCC: 5 | RNVC: 9
22505105: RNCC: 5 | RNVC: 9

30 May 1969

3460-12-129-4872
Shell End Mill Arbor

121294872
HF1-5-5-51X16MM: RNCC: 3 | RNVC: 2

30 May 1969

3460-12-306-3464
Aufnahmena Flansch

123063464
545 100: RNCC: 3 | RNVC: 9
6503828: RNCC: 5 | RNVC: 9
545 100: RNCC: 5 | RNVC: 9
6503828: RNCC: 5 | RNVC: 9

20 Feb 1986

3460-12-159-7562
Drill Chuck

121597562
1608572007: RNCC: 3 | RNVC: 2
136-024117: RNCC: 3 | RNVC: 2
024117: RNCC: 5 | RNVC: 2
136-10S-1/2-20: RNCC: 5 | RNVC: 2
136SU10S1-2X20NF: RNCC: 5 | RNVC: 9
24117: RNCC: 5 | RNVC: 9

30 May 1969

3460-12-357-8345
Universal Jaw Chuck

123578345
108688: RNCC: 3 | RNVC: 2
330/200: RNCC: 5 | RNVC: 2
330/200/5: RNCC: 5 | RNVC: 2

30 Jul 2002

3460-12-318-9092
Tube Bending Mandrel

123189092
5-16-100-000-40604: RNCC: 3 | RNVC: 2

24 Aug 1989

3460-12-317-7799
Collet Chuck

123177799
HK 23 290 510: RNCC: 3 | RNVC: 9
23290510: RNCC: 5 | RNVC: 9

11 May 1989

3460-12-336-6818
Maschinenre Halter

123366818
21182050: RNCC: 3 | RNVC: 9

7 Dec 1994

3460-12-194-2199
Countersink Pilot

121942199
AT484-61: RNCC: 3 | RNVC: 2
AT 484-3/16IN: RNCC: 5 | RNVC: 2
AT 484-3/16ZOLL: RNCC: 5 | RNVC: 2

12 Oct 1982

3460-12-325-3364
Straight Shank Tool Socket

123253364
8211-E-4,5-MK-B0: RNCC: 3 | RNVC: 9

27 May 1991

3460-12-129-7458
Lathe Dog

121297458
NO PRIMARY REF 12-129-7458: RNCC: 3 | RNVC: 2
40-1-2MM: RNCC: 5 | RNVC: 9
40GR0ESZE2: RNCC: 5 | RNVC: 9

30 May 1969

3460-12-126-6673
Lathe Center

121266673
601N-042839: RNCC: 3 | RNVC: 2
042839: RNCC: 5 | RNVC: 2
601N-110 MK5: RNCC: 5 | RNVC: 2
4-6-01-10-05: RNCC: 5 | RNVC: 9
601-110N: RNCC: 5 | RNVC: 9
601-42839: RNCC: 5 | RNVC: 9
601N-42839: RNCC: 5 | RNVC: 9

30 May 1969

3460-12-194-2195
Countersink Holder

121942195
AT 441SLS: RNCC: 3 | RNVC: 2

12 Oct 1982

3460-12-129-5878
Machinist's Parallel Clamp

121295878
70-246: RNCC: 3 | RNVC: 2

30 May 1969

3460-12-318-9090
Tube Bending Mandrel

123189090
5-14-160-000-40502: RNCC: 3 | RNVC: 2

24 Aug 1989

3460-12-318-9077
Tube Bending Mandrel

123189077
5-08-080-000-40203: RNCC: 3 | RNVC: 2

24 Aug 1989

3460-12-325-9333
Taper Shank Tool Socket

123259333
261-017005: RNCC: 3 | RNVC: 2
017005: RNCC: 5 | RNVC: 2
261 MK4/1 124: RNCC: 5 | RNVC: 9

23 Jul 1991