Excludes Abrasive Wheels, Cones, and other Abrasive Attachments for use only on Hand Held Power Tools.
Additional Information for Machine Tool accessories
NATO Supply Class 3460 is a classification for Machine Tool Accessories within NATO Supply Group 34, which is dedicated to Metalworking Machinery.
Machine Tool Accessories refer to a wide range of tools and equipment that are used in conjunction with machine tools to enhance their functionality and performance. These accessories can include items such as cutting tools, tool holders, workholding devices, measuring instruments, lubrication systems, and other components that are essential for the operation and maintenance of machine tools.
The purpose of NATO Supply Class 3460 is to provide a standardized classification system for machine tool accessories within the NATO military alliance. This classification system helps to streamline procurement processes and ensure compatibility and interoperability among different NATO member countries.
By categorizing machine tool accessories under NATO Supply Class 3460, it becomes easier for military organizations and defense contractors to identify, source, and procure the necessary accessories for their metalworking machinery. This classification system also facilitates inventory management and logistics planning for military operations involving metalworking machinery.
In summary, NATO Supply Class 3460 for Machine Tool Accessories in NATO Supply Group 34 for Metalworking Machinery is a classification system that helps to organize and standardize the procurement and use of machine tool accessories within the NATO military alliance.
NSN by Country
Frequently Asked Questions(FAQ) for Federal Supply Class 3460
- What is Federal Supply Class 3460?
- FSC 3460 is the Federal Supply Class(formally known as NATO Supply Classification Class NSC 3460) in the USA for supply items codified in the category of Machine Tool accessories.
- What is NATO Supply Classification Class 3460?
- NSC 3460 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 3460 in the USA) for supply items codified in the category of Machine Tool accessories.
- Which Federal Supply Group is FSC 3460 in?
- FSC 3460 is in Federal Supply Group(FSG) 34 which contains .
- Which NATO Supply Classification Group is NSC 3460 in?
- NSC 3460 is in NATO Supply Classification Group(NSG) 34 which contains .
Supply Items Included in Federal Supply Class 3460
- What is an Abrasive Wheel? 2340 Items
- An Abrasive Wheel (WHEEL,ABRASIVE) is a rigid piece of abrasive with or without mounting facilities. Items having such mounting facilities as a fixed spindle, a threaded insert, or an arbor hole are designed for mounting on a grinding machine, tool chuck or mandrel. Items without mounting facilities are designed to be secured in a wheel holder by means of spring clamps.
- What is a Bench And Machine Table Vise? 35 Items
- A Bench And Machine Table Vise (VISE,BENCH AND MACHINE TABLE) is a clamping device consisting of a base and two jaws mounted on a subbase. The subbase is designed for mounting on a workbench and is not normally mounted on a machine table. The base and jaw assembly may be readily detached from the subbase for use on a drilling machine, milling machine, grinding machine and the like.
- Clamp,Parallel,Machinist's 32 Items
- What is a V-Block? 180 Items
- A V-Block is a fixture of cast iron or steel, precision ground, having one or more V grooves machined parallel and squared with respect to the bottom, top, and ends. The block may have milled grooves on the sides to accommodate clamps which are used for holding cylindrical work.
- What is a Matched V-Block Set? 70 Items
- A Matched V-Block Set (V-BLOCK SET,MATCHED) is a set of two or more matched V-blocks.
- What is a Machine Table Vise? 261 Items
- A Machine Table Vise (VISE,MACHINE TABLE) is a clamping device consisting of a base and two jaws for use on a drilling machine, milling machine, grinding machine and the like. The base may be of stationary type or may be designed for angular adjustment. It may be bolt, screw, or strap clamp mounted or flat surface for resting upon the machine table. Excludes VISE, BENCH AND MACHINE TABLE.
- What is a Shell Reamer Arbor? 32 Items
- A Shell Reamer Arbor (ARBOR,SHELL REAMER) is a bar of special steel, machined and ground, having a Morse taper or a straight shank. The body end is tapered for mounting the cutter, which also has a taper slightly smaller to assure a tight fit. It is used on drilling and milling machines for holding shell reamers.
- What is a Bracing Jack? 41 Items
- A Bracing Jack (JACK,BRACING) is a device consisting of a bracing or lifting screw with nut, and a base V-shaped and slotted which permits bracing at various angles to a machine table by blocking or straddling the corners of angle plates or parallels. It is used for supporting or bracing work to be machined.
- What is a Planer Jack? 21 Items
- A Planer Jack (JACK,PLANER) is a device consisting of a bracing or lifting screw having a self-aligning swivel head and a flat base. The body is threaded and partially slotted for a locking bolt which clamps the bracing screw in any position. It is used for leveling work on machine tools, layout and inspection tables.
- What is a Vertical Jack? 45 Items
- A Vertical Jack (JACK,VERTICAL) is a device consisting of a bracing or lifting screw with nut and a flat base. Neither base nor screw revolve, the adjustment for height being made by turning the nut. It is used for leveling work on machine tools, layout and inspection tables.
- What is a Bench Centers? 18 Items
- A Bench Centers is a precision tool consisting of a base or bed with two heads fitted with hardened centers. One or both heads are adjustable on bed and locked in place by lever operated clamp gibs. It is used for inspecting and checking parts between centers.
- What is a Grinding-Buffing-Wire Brush Wheel Arbor? 58 Items
- A Grinding-Buffing-Wire Brush Wheel Arbor (ARBOR,WHEEL,GRINDING-BUFFING-WIRE BRUSH) is a bar of steel, machined or ground, with flange(s) and/or steel nut or machine screw. Used with drill chucks, lathe chucks, machine shafts and the like for mounting abrasive wheels, buffing wheels and wire wheels. See also ADAPTER, SPINDLE, PORTABLE SANDER.
- What is a Drill Holder? 75 Items
- A Drill Holder (HOLDER,DRILL) is a tool accessory used to hold a drill while drilling with a lathe. Excludes CHUCK, DRILL.
- What is a Straight Shank Tool Socket? 94 Items
- A Straight Shank Tool Socket (SOCKET,STRAIGHT SHANK TOOL) is a machine socket adapter for extending the length of tool sockets and/or for converting the size of sockets to size of straight tool shanks.
- What is a Taper Shank Tool Socket? 371 Items
- A Taper Shank Tool Socket (SOCKET,TAPER SHANK TOOL) is a machine socket adapter for extending the length of tool sockets and/or for converting the size of sockets to size of taper tool shanks.
- What is a Lathe Center? 294 Items
- A Lathe Center (CENTER,LATHE) is a device having a straight or tapered shank with a shaped head used as a bearing or support for the work.
- What is a Drill Chuck? 603 Items
- A Drill Chuck (CHUCK,DRILL) is an accessory for holding tools with a plain cylindrical shank such as drills, taps, or the like, by means of two or more internal selfcentering (universal) jaws. It may be attached directly to the spindle of a machine, arbor, shaft, hand mechanism, or the like without the use of centers. The jaws are simultaneously adjusted by an adjusting nut, sleeve, feed screw, or the like. The maximum rated capacity of this item is one (1) inch (25.4 mm) diameter. For universal chucks having a capacity in excess of one (1) inch (25.4 mm), see CHUCK, UNIVERSAL JAW. Excludes CHUCK, CENTERING, LATHE.
- What is a Machine Collet? 1420 Items
- A Machine Collet (COLLET,MACHINE) is a work holding device consisting of a longitudinally slotted sleeve which has a tapering or conical end designed to fit into a corresponding taper of a chuck so that the lengthwise movement of the sleeve causes a contraction or expansion of the gripping surfaces. The gripping or holding tension is actuated by a backward pull (draw in) or by a forward push (force in). Used on lathes, milling machines, screw machines and the like. Excludes SOCKET, STRAIGHT SHANK TOOL and SOCKET, TAPER SHANK TOOL.
- What is a Lathe Dog? 168 Items
- A Lathe Dog (DOG,LATHE) is a machine tool accessory used as a clamp for gripping a piece of work and conveying motion to it from the face plate.
- What is an Independent Jaw Chuck? 64 Items
- An Independent Jaw Chuck (CHUCK,INDEPENDENT JAW) is an accessory used for holding objects directly to the spindle of a machine, arbor, shaft or the like without the use of centers. Two or more jaws are adjusted separately, each by its own adjusting screw, to facilitate holding objects of irregular shape.
- What is an Independent-Universal Jaw Chuck? 54 Items
- An Independent-Universal Jaw Chuck (CHUCK,INDEPENDENT-UNIVERSAL JAW) is an accessory used for holding objects directly to the spindle of a machine, arbor, shaft, or the like, without the use of centers. It employs two or more jaws which may be separately adjusted, each by its own adjusting screw, and may also be simultaneously adjusted by gearing common to all jaws.
- What is an Universal Jaw Chuck? 163 Items
- An Universal Jaw Chuck (CHUCK,UNIVERSAL JAW) is an accessory used for holding objects directly to the spindle of a machine, arbor, shaft, or the like, without the use of centers. Two or more self-centering jaws are adjusted simultaneously, usually by rotation of a scroll gear which engages slots or teeth in the back of the jaws. Maximum rated capacity is in excess of one (1) inch (25.4 mm) diameter. For universal chucks having a maximum capacity of one (1) inch (25.4 mm) or less, see CHUCK, DRILL. Excludes CHUCK, CENTERING, LATHE.
- What is a Magnetic Chuck? 24 Items
- A Magnetic Chuck (CHUCK,MAGNETIC) is a device for holding ferrous items without the use of centers, jaws, clamps and the like. Used to prevent distortion of the items being held or to prevent interference with tools in a machining or hand finishing operation. Holding power is accomplished through magnetic force applied through a permanent magnet or an electromagnet, either of which may be provided with an off-on control.
- What is a Cutting Tool Holder? 3647 Items
- A Cutting Tool Holder (HOLDER,CUTTING TOOL) is an accessory designed to hold and support cutter bits or sleeve type boring bars of various types and sizes. It is used on lathes, automatic machines, planers, and shapers. Excludes items such as tool posts.
- What is a Boring Tool Bar? 354 Items
- A Boring Tool Bar (BAR,BORING TOOL) is an internal turning tool, usually having a single cutting point, used to enlarge a hole, to finish to size, and to insure its being true with a specificed center line.
- What is a Counterbore Pilot? 232 Items
- A Counterbore Pilot (PILOT,COUNTERBORE) is excludes PILOT, COUNTERSINK.
- What is a Countersink Pilot? 116 Items
- A Countersink Pilot (PILOT,COUNTERSINK) is a device specifically designed for use in conjunction with a HOLDER, COUNTERSINK to guide and align countersink cutters. Excludes PILOT, COUNTERBORE.
- What is a Solid Machine Mandrel? 313 Items
- A Solid Machine Mandrel (MANDREL,MACHINE,SOLID) is a cylindrical-shaped tool with a slight taper on the over-all length, centered on each end with a flat milled on the ends for a holder. It is used for holding work for machining operations on lathes and milling machines.
- What is a Machine Tool Attachment Grinding Machine? 113 Items
- A Machine Tool Attachment Grinding Machine (GRINDING MACHINE,MACHINE TOOL ATTACHMENT) is a motor driven device consisting of an abrasive wheel attached either directly to the motor shaft or to a spindle unit which is driven by a belt and an electric motor. May be used on lathes, milling machines, boring mills, shapers and slotters for grinding surface plates, rolls, journals, lathe centers, internal bores, external surfaces, or the like.
- What is an Expansion Mandrel? 193 Items
- An Expansion Mandrel (MANDREL,EXPANSION) is a holding tool, tapered on the over-all length and centered on both ends with a flat milled or ground on one end for aholder which, together with a flexible sleeve, is forcibly inserted into the work to support it for machining operations on lathes or milling machines.
- What is a Milling Cutter Arbor? 177 Items
- A Milling Cutter Arbor (ARBOR,MILLING CUTTER) is a bar of special steel, machined and ground, having a standard milling machine, Morse or Brown and Sharpe taper shank and furnished with or without bearing sleeves. It is used for mounting plain hole milling cutters of various types and sizes.
- What is a Counterbore Holder? 35 Items
- A Counterbore Holder (HOLDER,COUNTERBORE) is a cylindrical body having a straight or tapered shank which holds the cutter in place by driving lugs or two splines 180 degrees (3.1 radians) apart. It is used extensively on screw machines and boring mills. Excludes HOLDER, COUNTERSINK.
- What is a Countersink Holder? 75 Items
- A Countersink Holder (HOLDER,COUNTERSINK) is a cylindrical shaped device specifically designed to hold and position, as well as to control the cutting depth of a COUNTERSINK. The holder may have a micrometer stop adjustment or a plain sleeve with nut adjustment. Countersink cutters accommodated by this holder are of a specific design. Excludes HOLDER, COUNTERBORE.
- What is a Milling Machine Spindle End Adapter? 66 Items
- A Milling Machine Spindle End Adapter (ADAPTER,SPINDLE END,MILLING MACHINE) is an adapter designed to fit into the end of a milling machine spindle and accommodate various cutting tool holders and/or end milling cutters having shanks of different types and sizes. See also ARBOR (as modified).
- Arbor,Hole Saw 125 Items
- What is a Shell End Mill Arbor? 70 Items
- A Shell End Mill Arbor (ARBOR,SHELL END MILL) is a bar of special steel, machined and ground, having a standard milling machine or a Brown and Sharpe tapered shank. The body ends are ground to various diameters for mounting the different sizes of shell and mill cutters. It is used with adapters on milling machines having standardized spindle end and Brown and Sharpe milling machines having taper-nose or threaded spindles.
- What is a Center Tester? 20 Items
- A Center Tester (TESTER,CENTER) is an instrument used in adjusting and locating centrally any point or hole in a piece of work operated upon in a lathe chuck or faceplate. It consists of a holder with a universal ball socket for holding an indicating rod or "wiggler".
- What is a Wheel Dressing Diamond Nib? 58 Items
- A Wheel Dressing Diamond Nib (NIB,DIAMOND,WHEEL DRESSING) is an item consisting of an industrial diamond mounted in the end of a metal rod or bar and exposed to provide a cutting point or edge. It is used for truing, shaping, and dressing abrasive wheels. When in use, it is mounted in a suitable holder on a stand or machine and its movement across the wheel surface may be either manual or machine powered.
- What is a Cylinder Hone Stone And Holder? 47 Items
- A Cylinder Hone Stone And Holder (STONE AND HOLDER,CYLINDER HONE) is a mounted length of abrasive or combination of abrasive and cork. The stone is integral with the mount for use in conjunction with a cylinder honing tool.
- What is an Abrasive Wheel Dresser Stand? 14 Items
- An Abrasive Wheel Dresser Stand (STAND,ABRASIVE WHEEL DRESSER) is a device consisting of a cast steel base, a mandrel upon which the abrasive wheel can be mounted for revolving, and a diamond dressing nib. The diamond nib is mounted on a mechanical arm which is adjustable to the specific angle that wheel is to be trued or shaped. This arm is moved in a reciprocating motion causing the diamond to pass over the face of the revolving wheel thus performing the truing, shaping and dressing operation.
- What is a Drill Grinder Attachment? 23 Items
- A Drill Grinder Attachment (GRINDER ATTACHMENT,DRILL) is a mechanical item designed to be attached to a grinder for the purpose of holding various types of drills at the proper angle for sharpening the cutting end.
- Arbor,Drill Chuck 161 Items
- What is a Machine Collet Chucking Holding Fixture? 27 Items
- A Machine Collet Chucking Holding Fixture (HOLDING FIXTURE,COLLET CHUCKING,MACHINE) is a chucklike device designed to hold, by means of a collet, various kinds of round work while performing machine or drill operations. A spacing or indexing feature may be provided to equally space holes, slots, cuts, etc. It is equipped with a lever-handle arrangement to allow for the opening, closing, and indexing of the fixture. Excludes INDEXING FIXTURE.
- Pedestal,Grinding Machine 19 Items
- What is a Buffing Wheel? 121 Items
- A Buffing Wheel (WHEEL,BUFFING) is a disk shaped item of loose, bonded, or solid construction having an arbor hole for attaching to a rotary power-operated tool or machine. It may be fabricated of a single piece of felt, rubber, leather, cork, or the like; a single piece of wood, leather covered; or plies of muslin, flannel, canvass, or the like sewed or cemented together. It is used for buffing and/or polishing or burnishing. Excludes BRUSH, ROTARY (as modified); WHEEL, ABRASIVE; and PAD, POLISHING AND RUBBING.
- What is a Rotary Wheel Wire Brush? 67 Items
- A Rotary Wheel Wire Brush (BRUSH,WIRE,ROTARY WHEEL) is a disk shaped unit having a fill section of wire material extending from the perimeter of the disk perpendicular to the axis of the hub. It is used with a rotary power-operated device for roughing, buffing and/or polishing various surfaces. See also BRUSH, WIRE, ROTARY CUP; BRUSH, WIRE, ROTARY END; and BRUSH, FIBER, ROTARY WHEEL.
- What is an Abrasive Wheel Set? 18 Items
- An Abrasive Wheel Set (WHEEL SET,ABRASIVE) is a group of items consisting of two or more WHEEL, ABRASIVE, of various shapes and grits, with or without mounting facilities. This may include a case or holder for storage of the items.
- What is an Expansion Mandrel Set? 85 Items
- An Expansion Mandrel Set (MANDREL SET,EXPANSION) is a group of two or more MANDREL, EXPANSION.
- What is a Solid Machine Mandrel Set? 12 Items
- A Solid Machine Mandrel Set (MANDREL SET,MACHINE,SOLID) is a group of two or more MANDREL, MACHINE, SOLID.
- What is a Drill Chuck Key? 150 Items
- A Drill Chuck Key (KEY,DRILL CHUCK) is a hand tool designed for tightening or loosening the jaws of a drill chuck.
- Collet Set,Machine 77 Items
- Faceplate,Metalworking Lathe 64 Items
- Head,Boring 62 Items
- What is a Lapping Plate? 97 Items
- A Lapping Plate (PLATE,LAPPING) is a round, rectangular, or square-shaped item manufactured from various metals. By comparison, its thickness is less than its length, width, or diameter. The lap (abrading surface) has narrow V-shaped or straight-sided grooves to facilitate abrading. Used to produce a geometrically flat or smooth surface by abrasion. Excludes BLOCK, LAPPING. See also PLATE, DUPLEX, SURFACE AND LAPPING and PLATE, SURFACE.
- What is a Lapping Block? 34 Items
- A Lapping Block (BLOCK,LAPPING) is a cast iron item of solid (not ribbed) rectangular construction with plain surface(s) suitable for hand application to the part to be lapped. See also PLATE, DUPLEX, SURFACE AND LAPPING; PLATE, LAPPING; and PLATE, SURFACE.
- What is an Abrasive Sheet Element Arbor? 14 Items
- An Abrasive Sheet Element Arbor (ARBOR,ABRASIVE SHEET ELEMENT) is a specific bar of special steel, machined and ground, consisting of a plain cylindrical shank at one end, and the other end vertically slotted for the insertion of abrasive sheet elements. In use it is rotated by the chuck of a drill press, lathe, flexible shaft machine, or pneumatic or electric drill for the internal deburring, cleaning, polishing or finishing of a cylindrical hole.
- What is a Quick Change Chuck? 140 Items
- A Quick Change Chuck (CHUCK,QUICK CHANGE) is an item used to hold tools, such as drills, reamers, and the like without the use of jaws. It employs a sliding collar mechanism which engages a removable adapter to facilitate installation or removal of the tool.
- What is a Quick Change Chuck Adapter? 118 Items
- A Quick Change Chuck Adapter (ADAPTER,QUICK CHANGE CHUCK) is a cylindrical shaped item designed to hold various cutting tools and to simplify their installation in or removal from a quick change type chuck.
- What is a Portable Power Tool Counterbalance? 21 Items
- A Portable Power Tool Counterbalance (COUNTERBALANCE,PORTABLE POWER TOOL) is a device consisting of an adjustable spring actuated drum or reel and a wire cable having a lifting eye or hook on one end. It is designed for aerial suspension over the work bench, assembly line or the like in holding tools in counterbalanced suspension.
- What is a Rotary Wheel Fiber Brush? 54 Items
- A Rotary Wheel Fiber Brush (BRUSH,FIBER,ROTARY WHEEL) is a disk shaped unit having a fill section of vegetable fiber, synthetic filament, horsehair, or animal bristle material extending from the perimeter of the disk perpendicular to the axis of the hub. It is used with a rotary power-operated device for polishing, buffing, and/or cleaning various surfaces. See also BRUSH, WIRE, ROTARY WHEEL.
- Clamp,Parallel,Toolmaker's 26 Items
- What is a Contour Gripping Vise? 21 Items
- A Contour Gripping Vise (VISE,CONTOUR GRIPPING) is a clamping device consisting of a base with one stationary and one manual screw actuated jaw. Each jaw has either a series of independently sliding gripping fingers (finger type) encased in a housing, or a group of adjustable gripping cams (cam type) attached to the top. The gripping surfaces of either type may be locked in a position to grip securely irregularly shaped objects of square, round, or tapered shapes, and the like. It is designed to be mounted on a machine table.
- What is an Indexing Fixture? 70 Items
- An Indexing Fixture is an item designed to accurately select any degree of angle for milling, grinding, drilling, or boring operations. It is not furnished with a work-holding device such as a chuck or vise. It may be furnished with centers. It may be of the automatic angle selector type, manual (perforated disk) angle selector type, or optical system positioning type. It may consist of two units (a head and a tail-stock). Excludes HOLDING FIXTURE, COLLET CHUCKING, MACHINE.
- What is a Milling-Grinding-Drilling-Slotting Attachment? 32 Items
- A Milling-Grinding-Drilling-Slotting Attachment is a motor driven unit for milling, grinding, drilling, boring, slotting, gear cutting, thread milling, keyseating and external and internal grinding operations. It is adapted for mounting on a lathe, planer, shaper and/or boring mill. May also be used as a portable self-contained unit suitable for mounting on the item being worked, or bench mounting when provided with a feed table.
- What is a Polishing And Rubbing Pad? 39 Items
- A Polishing And Rubbing Pad (PAD,POLISHING AND RUBBING) is a flat, circular disk of flexible or semiflexible fabric designed for attachment to a backing pad or polishing holder of a power driven polisher or disk buffer, used for polishing and rubbing. Excludes WHEEL, BUFFING.
- What is a Lathe Centering Chuck? 29 Items
- A Lathe Centering Chuck (CHUCK,CENTERING,LATHE) is an item designed for centering and supporting round work without centers, such as centerless armature shafts and the like, in the tailstock of small engine lathes by means of three or more self-centering brass or bronze jaws, or an adjustable collet type brass or bronze bushing. The jaws or bushing may be adjusted for either running fit or driving fit on the round work. It is attached to the lathe by means of a tapered shank. Excludes CHUCK, DRILL and CHUCK, UNIVERSAL JAW.
- What is an Indexing Fixture Plate? 23 Items
- An Indexing Fixture Plate (PLATE,INDEXING FIXTURE) is a disk shaped item containing equally spaced holes around the face. It is used on an INDEXING FIXTURE to divide a 360 degree rotation of work into equal arcs.
- What is an Expansion Mandrel Sleeve? 316 Items
- An Expansion Mandrel Sleeve (SLEEVE,EXPANSION MANDREL) is a cylindrical spring type metal expansion sleeve which is a component of a MANDREL, EXPANSION.
- What is a Portable Metalworking Machinery Coolant Unit? 28 Items
- A Portable Metalworking Machinery Coolant Unit (COOLANT UNIT,METALWORKING MACHINERY,PORTABLE) is a device consisting of a tank, pump, and fluid delivery assembly(ies), used to deliver coolant fluid to metalworking machinery not equipped with integral coolant systems.
- What is a Tube Bending Mandrel? 131 Items
- A Tube Bending Mandrel (MANDREL,TUBE BENDING) is a tool that may be either flexible or rigid, designed to be inserted into a tube or hollow section to support the wall and prevent it from flattening or collapsing during bending operations. It is used with a BENDING MACHINE, PIPE AND CONDUIT.
- What is a Positioning Table? 65 Items
- A Positioning Table (TABLE,POSITIONING) is an item designed to accurately position another item for inspection, testing, maintenance or machining. The item is capable of linear and/or rotational movement but is not furnished with a work-holding device such as a chuck or vise. It may be manually operated or motor driven. Excludes POSITIONER, WELDING.
- What is a Hold Down Machine Clamp? 218 Items
- A Hold Down Machine Clamp (CLAMP,MACHINE,HOLD DOWN) is a clamp for holding down work on planer, punch presses, milling machines, boring mills, drill presses and the like.
- What is a Machine Cleaning Wiper? 91 Items
- A Machine Cleaning Wiper (WIPER,MACHINE CLEANING) is an item designed to remove fluids, dust, hot chips and other contaminants from surfaces and tool ways during normal operation of the equipment.
- What is a Metalworking Machinery Fixture? 80 Items
- A Metalworking Machinery Fixture (FIXTURE,METALWORKING MACHINERY) is an item mounted on a machine table and designed for clamping and releasing a workpiece in volume production. The item may operate as a vertical or horozontal fixture, depending on the induvidual design type.
- Holder Section,Cutting Tool 82 Items
- What is a Counterbore And Countersink Pilot? 51 Items
- A Counterbore And Countersink Pilot (PILOT,COUNTERBORE AND COUNTERSINK) is an item designed for guiding a COUNTERBORE, MACHINE or COUNTERSINK which are used for counterboring or countersinking holes in a workpiece.
- What is a Milling Machine Honing Mandrel? 90 Items
- A Milling Machine Honing Mandrel (MANDREL,HONING,MILLING MACHINE) is a metal item machined and ground with an integral shank. May have an integral guide shoe that retains and turns a dressing stone. Used in finishing inside surfaces.
- What is an Independent Jaw Chuck Jaw Set? 16 Items
- An Independent Jaw Chuck Jaw Set (JAW SET,CHUCK,INDEPENDENT JAW) is two or more opposable parts that open and close for holding something between them. Designed to be used with a CHUCK INDEPENDENT JAW.
- What is an Universal Jaw Chuck Jaw Set? 32 Items
- An Universal Jaw Chuck Jaw Set (JAW SET,CHUCK,UNIVERSAL JAW) is two or more opposable parts that open and close for holding something between them. Designed to be used with a CHUCK, UNIVERSAL JAW.
- What is an Universal Work Holder? 13 Items
- An Universal Work Holder (HOLDER,WORK,UNIVERSAL) is a holder used with sliding and hydraulic tables to retain the work in place.
- What is a Rip Fence? 12 Items
- A Rip Fence (FENCE,RIP) is an item which attaches to a SAW (as modified) to ensure straight and accurate cuts.
- What is a Jaw Clamp Insert Set? 19 Items
- A Jaw Clamp Insert Set (INSERT SET,JAW CLAMP) is two matched items which fit into the opposing faces of the jaw(s) of a clamp or vise. They permit an item which has a curved surface to be held without damage due to crushing or squeezing during machining operations. Excludes FAIRLEAD, BLOCK.
- What is a Lathe Steady Rest? 100 Items
- A Lathe Steady Rest (STEADY REST,LATHE) is an accessory, with one or more friction or roller type adjustable jaws, designed to support round material during the machining process. It may be bed or carriage mounted.
- What is a Collet Chuck? 321 Items
- A Collet Chuck (CHUCK,COLLET) is an item designed to be adapted to a machine spindle to accommodate a collet for holding work to be machined. It may be mounted directly to the spindle or to an arbor or adapter which in turn mounts to the spindle. The chuck is manipulated to contract or expand the collet which in turn grips or releases the work. Excludes HOLDING FIXTURE, COLLET CHUCKING, MACHINE.
- What is a Workpiece Centre Locator? 13 Items
- A Workpiece Centre Locator (LOCATOR,CENTRE,WORKPIECE) is a device designed to fit into the end of a spindle from metalworking machinery. It aligns the machine spindle with datum face of a workpiece.
- What is a Machine Tool Protective Shield? 13 Items
- A Machine Tool Protective Shield (SHIELD,PROTECTIVE,MACHINE TOOL) is a device mounted on lathes, milling machines, drilling machines and the like to prevent injury to the operator from the chuck, the cutting tool and shavings during machining operations. Excludes SHIELD, EYE, GRINDING WHEEL.
Stock Items From Supply Class 3460 Page 1of 60
- 014200304
- STC0011709
- RNCC: 3 | RNVC: 9
- STB0011709
- RNCC: 5 | RNVC: 9
- 151269791
- 4330-75X75X50
- RNCC: 3 | RNVC: 2
- 151363469
- 923
- RNCC: 3 | RNVC: 2
- 006113083
- K17WS
- RNCC: 3 | RNVC: 2
- 013888610
- K631WS
- RNCC: 3 | RNVC: 2
- 013237797
- ZT309-5/32
- RNCC: 3 | RNVC: 2
- 013237798
- ZT309-8
- RNCC: 3 | RNVC: 2
- 013237796
- ZT309-3/32
- RNCC: 3 | RNVC: 2
- 013237795
- ZT309-3/16
- RNCC: 3 | RNVC: 2
- 121315786
- DIN69120-A200X32X51-EK60M6KE
- RNCC: 2 | RNVC: 2
- 200X32X51ADIN69120EK60M6KE
- RNCC: 5 | RNVC: 9