Premium Information is available for this item - Upgrade for $1 a day
3455-01-438-6065
Cutting Tool Insert
3455014386065 014386065 APEB53R02
A geometrically shaped item with one or more edges designed for various machine operations such as boring, cut-off, planing, slotting, threading and turning. It is held in a pocket or other seating surfaces of a holder by mechanical means. It is not designed to be sharpened or reground. Indexable items must have two or more edges. For items designed for grinding, sharpening or with shanks, see CUTTER BIT, TOOL HOLDER. View more Cutting Tool Insert
May 2023
1
Marketplace 3455-01-438-6065
Request a Quotation from participating marketplace vendors
Related Documents 3455-01-438-6065 1+ Documents (More...)
BUY NE FedMall Updated Every Day 3455-01-438-6065 RQST NE Updated Every Day 3455-01-438-6065 RQST
Updated Every Day 3455-01-438-6065 RQST NE Related Documents 3455-01-438-6065 1+ Documents ( More...
Restrictions 3455-01-438-6065
3455-01-438-6065 is a Cutting Tool Insert that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 3455-01-438-6065
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3455-01-438-6065
- US Air Force (FGGG)
- Effective Date:
- 1 Jul 2006
- Former MOE Rule:
- FGCX
Approved Sources 3455-01-438-6065
- Part Number
- Manufacturer
- Status
- APEB53R02
- Manufacturer
- 5Y454 - Ingersoll Cutting Tool Company (Active)
- Primary Buy
- Primary Buy
Datasheet 3455-01-438-6065
- Characteristic
- Specifications
- FIIG
- Specifications
- T171-L
- Material [MATT]
- Steel
- Overall Width [ABMK]
- 0.062 Inches Nominal
DLA Procurement Analysis 3455-01-438-6065
Management Data 3455-01-438-6065
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Similar Supply Items to 3455-01-438-6065
Freight Information 3455-01-438-6065
3455-01-438-6065 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 186630. A Sub NMFC of X. It has a NMFC Description of TOOLS:NOI O/T PLSTC IN BBLS/BXS. 3455-01-438-6065 is rated as class 77.5 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 91810 which rates the freight between FCL and LCL. 3455-01-438-6065 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 732 for ocean manifesting and military sealift. 3455-01-438-6065 is not classified as a special type of cargo when transported by water. 3455-01-438-6065 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Procurement History 3455-01-438-6065 1 Records
Contracting Technical Data File (CTDF) 3455-01-438-6065 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: