3455-99-214-2559

HMIC : | PMIC : | EDC: | ADPEC : 5940-21-312-2010. https//www.nsnlookup.com /fsg-34/fsc-3455/uk 3455-99-214-2559
Machine Reamer 3455992142559 992142559 003122010 2540-00-312-2010 2540003122010 003122010 https

25 Apr 1991 3455-99-209-7268 End Milling Cutter 5055909RNCC: 3 | RNVC: 2 | DAC: 2 25 Apr 1991 3455-99-214-2559

5331-14-312-2010 5331143122010 143122010 is a nonmetallic circular item with an aperature, having a solid round cross-section. they are used primarily for sealing. for items with other than round cross section, see packing,preformed. for noncircular items with a round cross-section, see seal,nonmetallic round section and rubber,round section.

5340-01-312-2010 5340013122010 013122010 is a standoff that must have a threaded end(s) or be internally threaded its full length. for items having external threads on both ends, see stud (as modified). for items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see nut (as modified); use maximum dimensions(s) for compliance.

5940-21-312-2010 5940213122010 213122010