Premium Information is available for this item - Upgrade for $1 a day
3416-01-547-9285
Engine Lathe
3416015479285 015479285 8016CS
January 2023
1
Marketplace 3416-01-547-9285
Request a Quotation from participating marketplace vendors
Related Documents 3416-01-547-9285 1+ Documents (More...)
RQST NE Updated Every Day 3416-01-547-9285 RQST Updated Every Day 3416-01-547-9285 RQST NE Related Documents
3416-01-547-9285 1+ Documents ( More... ) https//www.nsnlookup.com /fsg-34/fsc-3416/us 3416-01-547-9285
Restrictions 3416-01-547-9285
IUID Required
3416-01-547-9285 is a Engine Lathe that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
End Users 3416-01-547-9285
- US Air Force (FGG4)
- Effective Date:
- 1 Feb 2007
Approved Sources 3416-01-547-9285
- Part Number
- Manufacturer
- Status
- 8016CS
- Manufacturer
- 64501 - Clausing Industrial Inc (Active)
- Primary Buy
- Primary Buy
Datasheet 3416-01-547-9285
- Characteristic
- Specifications
- FIIG
- Specifications
- T221-B
- Electric Motor Horsepower Rating [ASHK]
- 10.000
- Electric Motor Quantity [AWLX]
- 1
- Actual Swing Over Bed [BTTF]
- 13.750 Inches Nominal
- Bed Type [AWHA]
- Permanent Gap
- Carriage Cross Feed Operation Method [BTYS]
- Power
- Carriage Longitudinal Feed Operation Method [BTYR]
- Power
- Carriage Quantity [BTYQ]
- 1
- Center To Center Distance [ADQR]
- 25.000 Inches Nominal
- Current Type [ACDC]
- Ac
- Design Type [APGF]
- Screw
- Gear Change Type [BTYW]
- Plain
- Frequency In Hertz [FREQ]
- 60.0
- Headstock Center Taper Size Designator [BTWM]
- 3 Morse
- Headstock Drive Type [BTWL]
- Step Cone Pulley
- Hole Diameter Through Spindle [BTYP]
- 1.650 Inches Nominal
- Mounting Type [AAXX]
- Floor
- Purpose For Which Designed [AKSL]
- Toolroom
- Rated Swing [BTTD]
- 13.000 Inches Nominal
- Performance Type [AGLD]
- Heavy Duty
- Phase [FAAZ]
- Three
- Special Features [FEAT]
- Replacement For P/N 8014Cs2 Nsn 3416-01-348-9944.Bedway Width 12.5"; Swing In Gap 21"; Center Height Over Bed 6.7"; Travel Of Cross Slide 9.8"; Travel Of Top Slide 9.8"; Trailstock Quill Travel 5.7" And Quill Dia 2.8"
- Thread Quantity Range [BTZR]
- +2.0/+56.0 Per Inch
- Voltage In Volts [ELEC]
- 230.0 And 460.0
- Spindle Speed Quantity [BTSZ]
- 3
- Spindle Speed Range In Rpm [BTTB]
- +0.0/+3250.0
- Swing Over Cross Slide [BTTG]
- 7.750 Inches Nominal
- Thread Change Quantity [BTWB]
- 56
Management Data 3416-01-547-9285
- Effective Date
- Organization
- Unit of Issue
- Unit Price
- Qty Unit Pack
- Unit of Issue
- Dec 2019
- Department of the Air Force (DF)
- EA
- Subscribe
- 1
- EA
Air Force
- Budget:
- M
- 57X3080 - Other Base Maintenance and Support Equipment
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - S
- Reparable. Condemn at Depot. AF Equipment Management System (AFEMS).
NATO Stock Numbers Related to 3416-01-547-9285
Freight Information 3416-01-547-9285
3416-01-547-9285 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 123980. A Sub NMFC of X. It has a NMFC Description of LATHES,MTL WORKNG. 3416-01-547-9285 is rated as class 85 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 62930 which rates the freight between FCL and LCL. 3416-01-547-9285 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 593 for ocean manifesting and military sealift. 3416-01-547-9285 is not classified as a special type of cargo when transported by water. 3416-01-547-9285 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.