Premium Information is available for this item - Upgrade for $1 a day
3416-01-407-0421
Engine Lathe
3416014070421 014070421 8015CS2
January 2023
1
Marketplace 3416-01-407-0421
Request a Quotation from participating marketplace vendors
Related Documents 3416-01-407-0421 1+ Documents (More...)
RQST NE Updated Every Day 3416-01-407-0421 RQST Updated Every Day 3416-01-407-0421 RQST NE Related Documents
3416-01-407-0421 1+ Documents ( More... ) https//www.nsnlookup.com /fsg-34/fsc-3416/us 3416-01-407-0421
Restrictions 3416-01-407-0421
3416-01-407-0421 is a Engine Lathe that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 3416-01-407-0421
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3416-01-407-0421
- MOE Rule:
- DCR3
- Effective Date:
- 1 Jan 1996
- US Air Force (F5CR)
- Effective Date:
- 1 Jan 1996
Approved Sources 3416-01-407-0421
- Part Number
- Manufacturer
- Status
- 8015CS2
- Manufacturer
- 64501 - Clausing Industrial Inc (Active)
- Primary Buy
- Primary Buy
Datasheet 3416-01-407-0421
- Characteristic
- Specifications
- FIIG
- Specifications
- T221-B
- Bed Type [AWHA]
- Removable Block Gap
- Carriage Cross Feed Operation Method [BTYS]
- Power
- Carriage Quantity [BTYQ]
- 1
- Carriage Longitudinal Feed Operation Method [BTYR]
- Power
- Design Type [APGF]
- Screw
- Gear Change Type [BTYW]
- Quick
- Frequency In Hertz [FREQ]
- 60.0
- Headstock Center Taper Size Designator [BTWM]
- 3 Morse
- Headstock Drive Type [BTWL]
- Geared Head
- Hollow Spindle Hole Size [BTYN]
- 1.656 Inches Nominal
- Mounting Type [AAXX]
- Floor
- Purpose For Which Designed [AKSL]
- Toolroom
- Rated Swing Through Open Gap [BTWC]
- 21.000 Inches Nominal
- Special Features [FEAT]
- 2 Axis, Dro
- Performance Type [AGLD]
- Heavy Duty
- Phase [FAAZ]
- Three
- Thread Quantity Range [BTZR]
- +2.0/+56.0 Per Inch
- Spindle Speed Quantity [BTSZ]
- 3
- Swing Over Cross Slide [BTTG]
- 7.750 Inches Nominal
- Thread Change Quantity [BTWB]
- 56
Management Data 3416-01-407-0421
Air Force
- Budget:
- M
- 57X3080 - Other Base Maintenance and Support Equipment
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - U
- Reparable. Condemn at Intermediate. AF Equipment Management System (AFEMS).
NATO Stock Numbers Related to 3416-01-407-0421
Freight Information 3416-01-407-0421
3416-01-407-0421 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 131670. A Sub NMFC of Z. It has a NMFC Description of TOOLS PWR O/T PWR HND TOOLS. 3416-01-407-0421 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 61060 which rates the freight between FCL and LCL. 3416-01-407-0421 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 72E for ocean manifesting and military sealift. 3416-01-407-0421 is not classified as a special type of cargo when transported by water. 3416-01-407-0421 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 3416-01-407-0421
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- Packaging Data does not meet current MIL-STD-2073-1E
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- --
- --
- --
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- --
- --
- --
- --
- --
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- --