Premium Information is available for this item - Upgrade for $1 a day
3416-01-374-5650
Engine Lathe
3416013745650 013745650 8015CS3
January 2023
4
Marketplace 3416-01-374-5650
Request a Quotation from participating marketplace vendors
Related Documents 3416-01-374-5650 1+ Documents (More...)
RQST NE Updated Every Day 3416-01-374-5650 RQST Updated Every Day 3416-01-374-5650 RQST NE Related Documents
3416-01-374-5650 1+ Documents ( More... ) https//www.nsnlookup.com /fsg-34/fsc-3416/us 3416-01-374-5650
Restrictions 3416-01-374-5650
3416-01-374-5650 is a Engine Lathe that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 3416-01-374-5650
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3416-01-374-5650
- MOE Rule:
- DCR3
- Effective Date:
- 1 Jul 1994
- US Air Force (F5CR)
- Effective Date:
- 1 Jul 1994
Approved Sources 3416-01-374-5650
- Part Number
- Manufacturer
- Status
- 8015CS3
- Manufacturer
- 64501 - Clausing Industrial Inc (Active)
- Primary Buy
- Primary Buy
Datasheet 3416-01-374-5650
- Characteristic
- Specifications
- FIIG
- Specifications
- T221-B
- Electric Motor Horsepower Rating [ASHK]
- 10.000
- Accessory Components And Quantity [AKYD]
- 1Center Brush,2 3Mt Centers,Splash Guard,Coolant System,Inch Threading Dial,Wrench Set And Keys
- Actual Swing Through Open Gap [BTWD]
- 21.000 Inches Nominal
- Bed Type [AWHA]
- Removable Block Gap
- Current Type [ACDC]
- Ac
- Design Type [APGF]
- Screw
- Frequency In Hertz [FREQ]
- 60.0
- Headstock Center Taper Size Designator [BTWM]
- 3 Morse
- Hole Diameter Through Spindle [BTYP]
- 3.000 Inches Nominal
- Hollow Spindle Hole Size [BTYN]
- 1.656 Inches Nominal
- Mounting Type [AAXX]
- Floor
- Purpose For Which Designed [AKSL]
- General
- Rated Swing Through Open Gap [BTWC]
- 21.000 Inches Nominal
- Special Features [FEAT]
- 208V Available;Swing Over Cross Slide 7.750;Infinitely Variable Speed Spindle Drive;Apron W/Gated Controls;3 Range Headstock;Hp At Spindle 7.5;Bed 12.5 In. Wd;Cross Slide Tvl 10.0 In.;Compound Rest Travel 4.00 In.;Tailstock Center 4Mt;Tailstock Travel 5.75 In.;Feeds Per Spindle Rev 0.0012 - 0.08 In.;Magnetic Starter W/110V Controls;Qc Tool Post;Steady Rest;Follower Rest;Micro Bed Stop;Chuckguard;Chipguard;Taper Attachment;12.0 And 18.0 In. Face Plate;8.0 In. 3-Jaw Chuck;8.0 In. 4-Jaw Chuck
- Performance Type [AGLD]
- Heavy Duty
- Phase [FAAZ]
- Three
- Voltage In Volts [ELEC]
- 230.0 And 460.0
Management Data 3416-01-374-5650
Air Force
- Budget:
- M
- 57X3080 - Other Base Maintenance and Support Equipment
- Price Validation Code:
- E
- The current standard price is an estimated price.
Estimated Price challenges are allowed but follow procedures in para 60.b. (3) of section L of this manual.
This code will be changed to a P code upon notification of a contract price or this code will be changed to an updated code upon determination of a valid price.
- Expendability
Recoverability
Repairability: - S
- Reparable. Condemn at Depot. AF Equipment Management System (AFEMS).
NATO Stock Numbers Related to 3416-01-374-5650
Freight Information 3416-01-374-5650
3416-01-374-5650 has freight characteristics managed by the General Services Administration (GSA).It has a National Motor Freight Classification (NMFC) of 131670. A Sub NMFC of Z. It has a NMFC Description of TOOLS PWR O/T PWR HND TOOLS. 3416-01-374-5650 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 61060 which rates the freight between FCL and LCL. 3416-01-374-5650 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 72E for ocean manifesting and military sealift. 3416-01-374-5650 is not classified as a special type of cargo when transported by water. 3416-01-374-5650 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.