Premium Information is available for this item - Upgrade for $1 a day
3416-01-303-0508
Engine Lathe
3416013030508 013030508 MIL-L-13896E 3220 SUPERTURN 3220-34-GAPBLOCK 3416-2811-2168
January 2023
6
Marketplace 3416-01-303-0508
Request a Quotation from participating marketplace vendors
Related Documents 3416-01-303-0508 1+ Documents (More...)
23 Jun 1989 Data Last Changed January 2023 NATO Update Count 6 NATO Data Quality NSN 3416-01-303-0508
United States (US) 4. 3416-01-303-0508 Marketplace Restrictions Approved Sources Datasheet Management
Restrictions 3416-01-303-0508
3416-01-303-0508 is a Engine Lathe that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 3416-01-303-0508
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3416-01-303-0508
- MOE Rule:
- DCR3
- Effective Date:
- 1 Jul 1994
- US Air Force (F5CR)
- Effective Date:
- 1 Jul 1994
Approved Sources 3416-01-303-0508
- Part Number
- Manufacturer
- Status
- 3220 SUPERTURN
- Manufacturer
- 41292 - Monarch Machine Tool Co The (Active)
- Primary Buy
- Primary Buy
- MIL-L-13896E
- 81349 - Military Specifications (Active)
- Incomplete Standard
- Incomplete Standard
- 3220-34-GAPBLOCK
- 80315 - Lodge And Shipley/Manuflux (Obsolete)
- Canceled/Obsolete
- Canceled/Obsolete
- 3416-2811-2168
- 99998 - Defense Supply Center Richmond (Active)
- NATO Reference
- NATO Reference
Datasheet 3416-01-303-0508
- Characteristic
- Specifications
- FIIG
- Specifications
- T221-B
- Electric Motor Horsepower Rating [ASHK]
- 50.000
- Electric Motor Quantity [AWLX]
- 2
- Accessory Components And Quantity [AKYD]
- Taper Attach,1;Steady Rest,2;Four Way Tool Block,1
- Actual Swing Through Open Gap [BTWD]
- 58.000 Inches Nominal
- Actual Swing Over Closed Gap [BTWG]
- 46.000 Inches Nominal
- Bed Type [AWHA]
- Removable Block Gap
- Carriage Feed Change Quantity [BTYT]
- 55
- Carriage Cross Feed Operation Method [BTYS]
- Hand And Power
- Carriage Quantity [BTYQ]
- 1
- Carriage Longitudinal Feed Operation Method [BTYR]
- Hand And Power
- Center To Center Distance [ADQR]
- 48.000 Inches Minimum And 168.000 Inches Maximum
- Current Type [ACDC]
- Dc
- Design Type [APGF]
- Screw
- Gear Change Type [BTYW]
- Quick
- Frequency In Hertz [FREQ]
- 60.0
- Headstock Center Taper Size Designator [BTWM]
- 6 Morse
- Headstock Drive Type [BTWL]
- Geared Head
- Hollow Spindle Hole Size [BTYN]
- 12.500 Inches Nominal
- Mounting Type [AAXX]
- Floor
- Purpose For Which Designed [AKSL]
- General
- Rated Swing Over Closed Gap [BTWF]
- 44.000 Inches Nominal
- Rated Swing Through Open Gap [BTWC]
- 54.000 Inches Nominal
- Performance Type [AGLD]
- Heavy Duty
- Phase [FAAZ]
- Three
- Special Features [FEAT]
- Voltage Available Also In 230/460;Spindle Speed Qty Is Variable;Ctr To Ctr Distance Increases In 24 Inch Increments;Bed Lg 144.0 In.;Lg Of Gap 22.0 In.
- Thread Quantity Range [BTZR]
- +1.0/+64.0 Per Inch
- Voltage In Volts [ELEC]
- 220.0 And 440.0
- Spindle Speed Range In Rpm [BTTB]
- +7.0/+650.0
- Swing Over Cross Slide [BTTG]
- 40.000 Inches Nominal
- Thread Change Quantity [BTWB]
- 55
Management Data 3416-01-303-0508
Air Force
- Budget:
- M
- 57X3080 - Other Base Maintenance and Support Equipment
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - S
- Reparable. Condemn at Depot. AF Equipment Management System (AFEMS).
NATO Stock Numbers Related to 3416-01-303-0508
Freight Information 3416-01-303-0508
3416-01-303-0508 has freight characteristics managed by the General Services Administration (GSA).It has a National Motor Freight Classification (NMFC) of 131670. A Sub NMFC of Z. It has a NMFC Description of TOOLS PWR O/T PWR HND TOOLS. 3416-01-303-0508 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 61060 which rates the freight between FCL and LCL. 3416-01-303-0508 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 72E for ocean manifesting and military sealift. 3416-01-303-0508 is not classified as a special type of cargo when transported by water. 3416-01-303-0508 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 3416-01-303-0508
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- Packaging Data does not meet current MIL-STD-2073-1E
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- --
- --
- --
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- --
- Special Requirements
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- Special Requirement
- Special Requirements – see Specific Instructions or Drawings provided
- Special Requirements. See Specific Instructions or Drawings Provided
- Special Requirements. See Specific Instructions or Drawings Provided
- Special requirement – See specific instructions or drawings provided
- No special marking
- Special Requirements – see Specific Instructions or Drawings provided
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- No Requirement