Premium Information is available for this item - Upgrade for $1 a day
3416-00-466-1085
Horizontal Turret Lathe
3416004661085 004661085 M4640 3416-3213-9012
January 2023
6
Marketplace 3416-00-466-1085
Request a Quotation from participating marketplace vendors
Related Documents 3416-00-466-1085 1+ Documents (More...)
RQST NE Updated Every Day 3416-00-466-1085 RQST Updated Every Day 3416-00-466-1085 RQST NE Related Documents
3416-00-466-1085 1+ Documents ( More... ) https//www.nsnlookup.com /fsg-34/fsc-3416/us 3416-00-466-1085
Restrictions 3416-00-466-1085
3416-00-466-1085 is a Horizontal Turret Lathe This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 3416-00-466-1085
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3416-00-466-1085
- MOE Rule:
- DCR3
- Effective Date:
- 1 Jul 1994
- US Air Force (F5CR)
- Effective Date:
- 1 Jul 1994
Approved Sources 3416-00-466-1085
- Part Number
- Manufacturer
- Status
- M4640
- Manufacturer
- 63800 - Warner And Swasey Co Turning Div (Obsolete)
- Original Design
- Original Design
- 3416-3213-9012
- 99998 - Defense Supply Center Richmond (Active)
- NATO Reference
- NATO Reference
Datasheet 3416-00-466-1085
- Characteristic
- Specifications
- FIIG
- Specifications
- T221-A
- Electric Motor Horsepower Rating [ASHK]
- 15.000
- Accessory Components And Quantity [AKYD]
- None Specified
- Actual Swing Over Bed [BTTF]
- 18.125 Inches Nominal
- Cross Feed Range Per Spindle Revolution [BTTN]
- +0.002 To 0.020 Inches
- Current Type [ACDC]
- Ac
- Design Type [APGF]
- Ram
- Frequency In Hertz [FREQ]
- 60.0
- Maximum Bar Stock Diameter Accommodated [BTSX]
- 2.000 Inches
- Maximum Chucking Distance Over Universal Carriage [BTSY]
- 12.000 Inches
- Maximum Distance From Spindle Nose To Turret Face [BTTH]
- 32.250 Inches
- Mounting Type [AAXX]
- Floor
- Longitudinal Feed Range Per Spindle Revolution [BTTM]
- +0.003 To 0.029 Inches
- Power Source [ATJK]
- Electric Motor
- Rated Swing [BTTD]
- 15.750 Inches Nominal
- Reference Number Differentiating Characteristics [ZZZY]
- As Differentiated Byelectric Motor Horsepower Rating,Current Type,Voltage In Volts,Current Rating In Amperes,Frequency In Hertz,And Phase
- Phase [FAAZ]
- Three
- Turret Carriage Feed Type [BTTT]
- Power
- Turret Carriage Longitudinal Feed Range Per Spindle Revolution [BTTW]
- +0.003 To 0.032
- Turret Carriage Longitudinal Travel [BTTR]
- 12.000 Inches Nominal
- Turret Position Quantity [BTTZ]
- 6
- Turret Shape [BTTY]
- Hexagon
- Universal Carriage Cross Travel [BTTK]
- 9.000 Inches Nominal
- Universal Carriage Compound [BTTP]
- Not Included
- Universal Carriage Longitudinal Travel [BTTJ]
- 21.188 Inches Nominal
- Universal Carriage Feed Type [BTTL]
- Power
- Voltage In Volts [ELEC]
- 220.0 And 440.0
- Spindle Reversibility [BTTC]
- Reversible
- Spindle Speed Quantity [BTSZ]
- 24
- Spindle Speed Range In Rpm [BTTB]
- +30.0 To 1866.0
- Swing Over Cross Slide [BTTG]
- 9.500 Inches Nominal
Management Data 3416-00-466-1085
Air Force
- Budget:
- M
- 57X3080 - Other Base Maintenance and Support Equipment
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - S
- Reparable. Condemn at Depot. AF Equipment Management System (AFEMS).
NATO Stock Numbers Related to 3416-00-466-1085
Freight Information 3416-00-466-1085
3416-00-466-1085 has freight characteristics managed by the General Services Administration (GSA).It has a National Motor Freight Classification (NMFC) of 133300. A Sub NMFC of Z. It has a NMFC Description of MACHINERY/MACHINES NOI. 3416-00-466-1085 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. 3416-00-466-1085 is rated as class 100 when transported by Less-Than Carload (LCL) rail or ocean freight. It has a Uniform Freight Classification (UFC) number of 63220 which rates the freight between FCL and LCL. It has a Water Commodity Code (WCC) of 72E for ocean manifesting and military sealift. 3416-00-466-1085 is not classified as a special type of cargo when transported by water. 3416-00-466-1085 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 3416-00-466-1085
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- Packaging Data does not meet current MIL-STD-2073-1E
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- --
- --
- --
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- --
- Special Requirements
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- Special Requirement
- Special Requirements – see Specific Instructions or Drawings provided
- Special Requirements. See Specific Instructions or Drawings Provided
- Special Requirements. See Specific Instructions or Drawings Provided
- Special requirement – See specific instructions or drawings provided
- Special requirements
- Special Requirements – see Specific Instructions or Drawings provided
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- No Requirement