Premium Information is available for this item - Upgrade for $1 a day
3405-00-294-9591
Metal Cutting Band Saw
3405002949591 002949591 MIL-S-80201 3405-2252-1512
A vairable speed saw, basically designed to cut and/or file metal, using a band saw blade and/or a band file that is revolved or rotated around a driver and idler wheel(s). The teeth form a vertical line while passing through the work. It is equipped with a fixed or tilting horizontal table for mounting the work. The work table and/or saw frame may be capable of tilting as a unit to permit angle cutting. It may be provided with sufficient cutting speeds to allow for wood and/or other material cutting. Excludes SAW (3), BAND, CUTOFF. View more Metal Cutting Band Saw
May 2023
8
Marketplace 3405-00-294-9591
Request a Quotation from participating marketplace vendors
Related Documents 3405-00-294-9591 5+ Documents (More...)
/fsg-34/fsc-3405/us
Restrictions 3405-00-294-9591
3405-00-294-9591 is a Metal Cutting Band Saw Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 3405-00-294-9591
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3405-00-294-9591
- US Army (A405)
- Effective Date:
- 1 Apr 1996
- Former MOE Rule:
- A402
- MOE Rule:
- DCR3
- Effective Date:
- 1 Apr 1996
- US Marine Corps (MCG1)
- Effective Date:
- 1 Apr 1996
- Former MOE Rule:
- MA39
- Republic of Korea (ZH01)
- Effective Date:
- 1 Apr 1991
- Greece (ZU01)
- Effective Date:
- 1 Apr 1991
- Turkey (ZW01)
- Effective Date:
- 1 Nov 2005
Approved Sources 3405-00-294-9591
- Part Number
- Manufacturer
- Status
- MIL-S-80201
- Manufacturer
- 81349 - Military Specifications (Active)
- Incomplete Standard
- Incomplete Standard
- 3405-2252-1512
- 99998 - Defense Supply Center Richmond (Active)
- NATO Reference
- NATO Reference
Datasheet 3405-00-294-9591
- Characteristic
- Specifications
- FIIG
- Specifications
- T294-S
- Drive Method [ARCM]
- Electric Motor
- Electric Motor Quantity [AWLX]
- 1
- Accessory Components And Quantity [AKYD]
- Aluminum Oxide Abrasive Band,1 In. W,12 Ea,No. 50,No. 80,No. 150; Saw Blade Guide Adapter Set,90 Deg 1; Drive Belt Set 1; Flexible Back Conventional Tooth Set,Band Saw Blade,Raker Set,100 Ft Coils Per Ggg-B-421,Ty 1,Style 1,8 Coils 0.025 In. Thk,W In In. And Teeth As Follows 1/8 14,1/8 18,1/8 24,1/4 10,1/4 18,1/4 24,1/2 6,1/2 10,2 Coils 0.032 In. Thk,3/4 10; Skip Tooth Flexible Back Band Saw Blade,100 Ft Coils Per Ggg-B-421,Ty 1,Style 2,2 Coils 0.025 In. Thk,W In In. And Teeth As Follows 1/4 6,1/2 4,1 Coil 0.032 In. Thk,3/4 3; 1 Pump And Chip Blower,1 Circle Cutting Attachment; 1 Cut Off-Mitre Attachment; Med Cut Flat Bastard File Bands 1 Ea 1/4 In. W,1/2 In. W; Oval Bastard File Band Med Cut 1/4 In. W Bands 1 Set; File Band Guides 1 Set Ea For 1/4 In. 1/2 In. W Bands; 1 Set Roller Back-Up Bearing For 1/2,3/16,1/4,3/8,1/2,3/4 In. W/Blades; 1 Holding Jaw; 1 Shielded Table Light; 1 Etching Pencil; 1 Rip Fence
- Band Type For Which Designed [BWMC]
- File Or Saw Blade
- Blade Maximum Width Accommodated [BWMH]
- 0.750 Inches
- Braking Facility [AQLX]
- Not Included
- Built-In Coolant System [BWNG]
- Not Included
- Cutting Speed Range [BWMZ]
- +50.0 To 5200.0 Feet Per Minute
- Current Type [ACDC]
- Ac
- Departure From Cited Designator [ZZZX]
- As Modified By Voltage Rating
- Distance Between Guide And Table [BWMN]
- 12.000 Inches Nominal
- Feed Method [AMWX]
- Work Into Cutting Band
- File Maximum Width Accommodated [BWMF]
- 0.500 Inches
- Frame Type [ALDF]
- Rigid
- Frequency Rating [ACZB]
- 60.000 Hertz Nominal
- Horsepower Rating [ANCY]
- 1.500
- Mounting Type [AAXX]
- Floor
- Nondefinitive Spec/Std Data [ZZZT]
- 16 Size
- Infinite Cutting Speed Feature [BWNC]
- Provided
- Integral Butt Welder [BWNH]
- Included
- Integral Grinder [BWNJ]
- Included
- Power Feed Feature [BWND]
- Provided
- Phase [FAAZ]
- Three
- Special Features [FEAT]
- Accessory Components And Qty,File Band Guides 1/4 In. W,1 Set,File Band Guides 1/2 In. W,1 Set; Back-Up Roller Bearing For 1/8,3/16,1/4,3/8,1/2,And 3/4 In. W Blades,1 Set; Jaw Holding 1; Shielded Table Light 1; Etching Pencil 1; Rip Fence 1
- Throat Depth [AQCL]
- 15.250 Inches Nominal
- Vise [BWML]
- Not Provided
- Voltage Rating [AMSE]
- 208.000 Volts Nominal
- Table Left Tilt Angle In Deg [BWLZ]
- 10.0
- Table Length [ARDQ]
- 24.000 Inches Nominal
- Table Right Tilt Angle In Deg [BWLY]
- 45.0
- Table Type [BNBB]
- Tilting
- Table Width [ARDR]
- 24.000 Inches Nominal
Management Data 3405-00-294-9591
Army
- Materiel Category and Inventory Manager:
- M
- Ammunition weapons, and tracked combat vehicles weapons, special weapons, chemical and fire control materiel
- Appropriation and Budget Activity:
- Q
- Other Support Equipment
- Management Inventory Segment:
- 1
- Repairable Items(Exclusive of Insurance and Provisioning Items)
This code will be used to identify serviceable or unserviceable items of a durable nature, which when unserviceable normally can be repaired economically by depots or lower echelons of maintenance.
- Weapons System / End Item / Homogeneous Group:
- L6
- Other Weapons Categories
Major Items Shop Equipment
- Accounting Requirements:
- N
- Nonexpendable item.An item of Army property coded with an ARC of N in the AMDF.Nonexpendable items require property book accountability after issue from the stock record account.Commercial and fabricated items similar to items coded N in the AMDF are considered nonexpendable items.
Marine Corps
- Stores Account:
- 2
- Appropriation Stores Account Secondary Item
- Combat Essentiality:
- 2
- Non-Critical Repair Part
- Echelon Management:
- 31
- Operational Test:
- No Special Procedures
NATO Stock Numbers Related to 3405-00-294-9591
Freight Information 3405-00-294-9591
3405-00-294-9591 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 131670. A Sub NMFC of Z. It has a NMFC Description of TOOLS PWR O/T PWR HND TOOLS. 3405-00-294-9591 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. 3405-00-294-9591 is rated as a variable freight class when transported by Less-Than Carload (LCL) rail or ocean freight. It has a Uniform Freight Classification (UFC) number of 61060 which rates the freight between FCL and LCL. It has a Water Commodity Code (WCC) of 72E for ocean manifesting and military sealift. 3405-00-294-9591 is not classified as a special type of cargo when transported by water. 3405-00-294-9591 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.