FSG 34 Metalworking Machinery

Question 1

What is Federal Supply Group 34?

Accepted Answer

FSG 34 is the Federal Supply Group (formally known as NATO Supply Classification Group NSG 34) in the USA for supply items codified in the category of Metalworking Machinery.

Question 2

What is NATO Supply Classification Group 34?

Accepted Answer

NSG 34 is the NATO Supply Classification Group (also known as Federal Supply Group FSG 34 in the USA) for supply items codified in the category of Metalworking Machinery.

Question 3

Which Federal Supply Classes are in FSG 34?

Accepted Answer

FSG 34 contains the following Federal Supply Classes (FSC) (formally known as NATO Supply Classification Class [NSC]): 3460,3455,3412,3433,3456,3450,3445,3461,3405,3419,3438,3426,3415,3431,3436,3465,3441,3446,3448,3410,3416,3414,3411,3439,3447,3424,3417,3470,3432,3413,3418,3408,3444,3449,3442,3443,3422,3428

Question 4

Which NATO Supply Classification Classes are in NSG 34?

Accepted Answer

NSG 34 contains the following NATO Supply Classification Classes (NSC) (also known as Federal Supply Class [FSC] in the USA): 3460,3455,3412,3433,3456,3450,3445,3461,3405,3419,3438,3426,3415,3431,3436,3465,3441,3446,3448,3410,3416,3414,3411,3439,3447,3424,3417,3470,3432,3413,3418,3408,3444,3449,3442,3443,3422,3428

Question 5

When did the transition from Federal Supply Groups (FSG) to NATO Supply Groups (NSG) occur?

Accepted Answer

The transition from Federal Supply Groups (FSG) to NATO Supply Groups (NSG) occurred on January 1, 1997. This change was implemented to align the classification and coding systems used by NATO member countries for military supplies and equipment. Federal Supply Groups (FSG) are now obsolete.

Question 6

What is an Abrasive Wheel?

Accepted Answer

An Abrasive Wheel (WHEEL,ABRASIVE) is a rigid piece of abrasive with or without mounting facilities. Items having such mounting facilities as a fixed spindle, a threaded insert, or an arbor hole are designed for mounting on a grinding machine, tool chuck or mandrel. Items without mounting facilities are designed to be secured in a wheel holder by means of spring clamps.

Question 7

What is a Bench And Machine Table Vise?

Accepted Answer

A Bench And Machine Table Vise (VISE,BENCH AND MACHINE TABLE) is a clamping device consisting of a base and two jaws mounted on a subbase. The subbase is designed for mounting on a workbench and is not normally mounted on a machine table. The base and jaw assembly may be readily detached from the subbase for use on a drilling machine, milling machine, grinding machine and the like.

Question 8

What is a V-Block?

Accepted Answer

A V-Block is a fixture of cast iron or steel, precision ground, having one or more V grooves machined parallel and squared with respect to the bottom, top, and ends. The block may have milled grooves on the sides to accommodate clamps which are used for holding cylindrical work.

Question 9

What is a Matched V-Block Set?

Accepted Answer

A Matched V-Block Set (V-BLOCK SET,MATCHED) is a set of two or more matched V-blocks.

Question 10

What is a Machine Table Vise?

Accepted Answer

A Machine Table Vise (VISE,MACHINE TABLE) is a clamping device consisting of a base and two jaws for use on a drilling machine, milling machine, grinding machine and the like. The base may be of stationary type or may be designed for angular adjustment. It may be bolt, screw, or strap clamp mounted or flat surface for resting upon the machine table. Excludes VISE, BENCH AND MACHINE TABLE.

Question 11

What is a Shell Reamer Arbor?

Accepted Answer

A Shell Reamer Arbor (ARBOR,SHELL REAMER) is a bar of special steel, machined and ground, having a Morse taper or a straight shank. The body end is tapered for mounting the cutter, which also has a taper slightly smaller to assure a tight fit. It is used on drilling and milling machines for holding shell reamers.

Question 12

What is a Bracing Jack?

Accepted Answer

A Bracing Jack (JACK,BRACING) is a device consisting of a bracing or lifting screw with nut, and a base V-shaped and slotted which permits bracing at various angles to a machine table by blocking or straddling the corners of angle plates or parallels. It is used for supporting or bracing work to be machined.

Question 13

What is a Planer Jack?

Accepted Answer

A Planer Jack (JACK,PLANER) is a device consisting of a bracing or lifting screw having a self-aligning swivel head and a flat base. The body is threaded and partially slotted for a locking bolt which clamps the bracing screw in any position. It is used for leveling work on machine tools, layout and inspection tables.

Question 14

What is a Vertical Jack?

Accepted Answer

A Vertical Jack (JACK,VERTICAL) is a device consisting of a bracing or lifting screw with nut and a flat base. Neither base nor screw revolve, the adjustment for height being made by turning the nut. It is used for leveling work on machine tools, layout and inspection tables.

Question 15

What is a Bench Centers?

Accepted Answer

A Bench Centers is a precision tool consisting of a base or bed with two heads fitted with hardened centers. One or both heads are adjustable on bed and locked in place by lever operated clamp gibs. It is used for inspecting and checking parts between centers.

Question 16

What is a Grinding-Buffing-Wire Brush Wheel Arbor?

Accepted Answer

A Grinding-Buffing-Wire Brush Wheel Arbor (ARBOR,WHEEL,GRINDING-BUFFING-WIRE BRUSH) is a bar of steel, machined or ground, with flange(s) and/or steel nut or machine screw. Used with drill chucks, lathe chucks, machine shafts and the like for mounting abrasive wheels, buffing wheels and wire wheels. See also ADAPTER, SPINDLE, PORTABLE SANDER.

Question 17

What is a Surface And Lapping Duplex Plate?

Accepted Answer

A Surface And Lapping Duplex Plate (PLATE,DUPLEX,SURFACE AND LAPPING) is a cast iron item with two working surfaces, one of which is smooth (not grooved) and suitable for use either as a PLATE, SURFACE or for lapping, and the other surface grooved for lapping only.

Question 18

What is a Drill Holder?

Accepted Answer

A Drill Holder (HOLDER,DRILL) is a tool accessory used to hold a drill while drilling with a lathe. Excludes CHUCK, DRILL.

Question 19

What is a Straight Shank Tool Socket?

Accepted Answer

A Straight Shank Tool Socket (SOCKET,STRAIGHT SHANK TOOL) is a machine socket adapter for extending the length of tool sockets and/or for converting the size of sockets to size of straight tool shanks.

Question 20

What is a Taper Shank Tool Socket?

Accepted Answer

A Taper Shank Tool Socket (SOCKET,TAPER SHANK TOOL) is a machine socket adapter for extending the length of tool sockets and/or for converting the size of sockets to size of taper tool shanks.

Question 21

What is a Lathe Center?

Accepted Answer

A Lathe Center (CENTER,LATHE) is a device having a straight or tapered shank with a shaped head used as a bearing or support for the work.

Question 22

What is a Drill Chuck?

Accepted Answer

A Drill Chuck (CHUCK,DRILL) is an accessory for holding tools with a plain cylindrical shank such as drills, taps, or the like, by means of two or more internal selfcentering (universal) jaws. It may be attached directly to the spindle of a machine, arbor, shaft, hand mechanism, or the like without the use of centers. The jaws are simultaneously adjusted by an adjusting nut, sleeve, feed screw, or the like. The maximum rated capacity of this item is one (1) inch (25.4 mm) diameter. For universal chucks having a capacity in excess of one (1) inch (25.4 mm), see CHUCK, UNIVERSAL JAW. Excludes CHUCK, CENTERING, LATHE.

Question 23

What is a Machine Collet?

Accepted Answer

A Machine Collet (COLLET,MACHINE) is a work holding device consisting of a longitudinally slotted sleeve which has a tapering or conical end designed to fit into a corresponding taper of a chuck so that the lengthwise movement of the sleeve causes a contraction or expansion of the gripping surfaces. The gripping or holding tension is actuated by a backward pull (draw in) or by a forward push (force in). Used on lathes, milling machines, screw machines and the like. Excludes SOCKET, STRAIGHT SHANK TOOL and SOCKET, TAPER SHANK TOOL.

Question 24

What is a Lathe Dog?

Accepted Answer

A Lathe Dog (DOG,LATHE) is a machine tool accessory used as a clamp for gripping a piece of work and conveying motion to it from the face plate.

Question 25

What is an Independent Jaw Chuck?

Accepted Answer

An Independent Jaw Chuck (CHUCK,INDEPENDENT JAW) is an accessory used for holding objects directly to the spindle of a machine, arbor, shaft or the like without the use of centers. Two or more jaws are adjusted separately, each by its own adjusting screw, to facilitate holding objects of irregular shape.

Question 26

What is an Independent-Universal Jaw Chuck?

Accepted Answer

An Independent-Universal Jaw Chuck (CHUCK,INDEPENDENT-UNIVERSAL JAW) is an accessory used for holding objects directly to the spindle of a machine, arbor, shaft, or the like, without the use of centers. It employs two or more jaws which may be separately adjusted, each by its own adjusting screw, and may also be simultaneously adjusted by gearing common to all jaws.

Question 27

What is an Universal Jaw Chuck?

Accepted Answer

An Universal Jaw Chuck (CHUCK,UNIVERSAL JAW) is an accessory used for holding objects directly to the spindle of a machine, arbor, shaft, or the like, without the use of centers. Two or more self-centering jaws are adjusted simultaneously, usually by rotation of a scroll gear which engages slots or teeth in the back of the jaws. Maximum rated capacity is in excess of one (1) inch (25.4 mm) diameter. For universal chucks having a maximum capacity of one (1) inch (25.4 mm) or less, see CHUCK, DRILL. Excludes CHUCK, CENTERING, LATHE.

Question 28

What is a Magnetic Chuck?

Accepted Answer

A Magnetic Chuck (CHUCK,MAGNETIC) is a device for holding ferrous items without the use of centers, jaws, clamps and the like. Used to prevent distortion of the items being held or to prevent interference with tools in a machining or hand finishing operation. Holding power is accomplished through magnetic force applied through a permanent magnet or an electromagnet, either of which may be provided with an off-on control.

Question 29

What is a Cutting Tool Holder?

Accepted Answer

A Cutting Tool Holder (HOLDER,CUTTING TOOL) is an accessory designed to hold and support cutter bits or sleeve type boring bars of various types and sizes. It is used on lathes, automatic machines, planers, and shapers. Excludes items such as tool posts.

Question 30

What is a Boring Tool Bar?

Accepted Answer

A Boring Tool Bar (BAR,BORING TOOL) is an internal turning tool, usually having a single cutting point, used to enlarge a hole, to finish to size, and to insure its being true with a specificed center line.

Question 31

What is a Counterbore Pilot?

Accepted Answer

A Counterbore Pilot (PILOT,COUNTERBORE) is excludes PILOT, COUNTERSINK.

Question 32

What is a Countersink Pilot?

Accepted Answer

A Countersink Pilot (PILOT,COUNTERSINK) is a device specifically designed for use in conjunction with a HOLDER, COUNTERSINK to guide and align countersink cutters. Excludes PILOT, COUNTERBORE.

Question 33

What is a Fly Cutter Arbor?

Accepted Answer

A Fly Cutter Arbor (ARBOR,FLY CUTTER) is a bar of special steel, machined and ground, having a standard milling machine or Brown and Sharpe taper shank. A square hole with set screws for holding the cutting tool is provided in the body end. It is used with a tool bit ground to an appropriate form for cutting cylindrical holes.

Question 34

What is a Solid Machine Mandrel?

Accepted Answer

A Solid Machine Mandrel (MANDREL,MACHINE,SOLID) is a cylindrical-shaped tool with a slight taper on the over-all length, centered on each end with a flat milled on the ends for a holder. It is used for holding work for machining operations on lathes and milling machines.

Question 35

What is a Machine Tool Attachment Grinding Machine?

Accepted Answer

A Machine Tool Attachment Grinding Machine (GRINDING MACHINE,MACHINE TOOL ATTACHMENT) is a motor driven device consisting of an abrasive wheel attached either directly to the motor shaft or to a spindle unit which is driven by a belt and an electric motor. May be used on lathes, milling machines, boring mills, shapers and slotters for grinding surface plates, rolls, journals, lathe centers, internal bores, external surfaces, or the like.

Question 36

What is an Expansion Mandrel?

Accepted Answer

An Expansion Mandrel (MANDREL,EXPANSION) is a holding tool, tapered on the over-all length and centered on both ends with a flat milled or ground on one end for aholder which, together with a flexible sleeve, is forcibly inserted into the work to support it for machining operations on lathes or milling machines.

Question 37

What is a Milling Cutter Arbor?

Accepted Answer

A Milling Cutter Arbor (ARBOR,MILLING CUTTER) is a bar of special steel, machined and ground, having a standard milling machine, Morse or Brown and Sharpe taper shank and furnished with or without bearing sleeves. It is used for mounting plain hole milling cutters of various types and sizes.

Question 38

What is a Counterbore Holder?

Accepted Answer

A Counterbore Holder (HOLDER,COUNTERBORE) is a cylindrical body having a straight or tapered shank which holds the cutter in place by driving lugs or two splines 180 degrees (3.1 radians) apart. It is used extensively on screw machines and boring mills. Excludes HOLDER, COUNTERSINK.

Question 39

What is a Countersink Holder?

Accepted Answer

A Countersink Holder (HOLDER,COUNTERSINK) is a cylindrical shaped device specifically designed to hold and position, as well as to control the cutting depth of a COUNTERSINK. The holder may have a micrometer stop adjustment or a plain sleeve with nut adjustment. Countersink cutters accommodated by this holder are of a specific design. Excludes HOLDER, COUNTERBORE.

Question 40

What is a Milling Machine Spindle End Adapter?

Accepted Answer

A Milling Machine Spindle End Adapter (ADAPTER,SPINDLE END,MILLING MACHINE) is an adapter designed to fit into the end of a milling machine spindle and accommodate various cutting tool holders and/or end milling cutters having shanks of different types and sizes. See also ARBOR (as modified).

Question 41

What is a Shell End Mill Arbor?

Accepted Answer

A Shell End Mill Arbor (ARBOR,SHELL END MILL) is a bar of special steel, machined and ground, having a standard milling machine or a Brown and Sharpe tapered shank. The body ends are ground to various diameters for mounting the different sizes of shell and mill cutters. It is used with adapters on milling machines having standardized spindle end and Brown and Sharpe milling machines having taper-nose or threaded spindles.

Question 42

What is a Center Tester?

Accepted Answer

A Center Tester (TESTER,CENTER) is an instrument used in adjusting and locating centrally any point or hole in a piece of work operated upon in a lathe chuck or faceplate. It consists of a holder with a universal ball socket for holding an indicating rod or "wiggler".

Question 43

What is a Wheel Dressing Diamond Nib?

Accepted Answer

A Wheel Dressing Diamond Nib (NIB,DIAMOND,WHEEL DRESSING) is an item consisting of an industrial diamond mounted in the end of a metal rod or bar and exposed to provide a cutting point or edge. It is used for truing, shaping, and dressing abrasive wheels. When in use, it is mounted in a suitable holder on a stand or machine and its movement across the wheel surface may be either manual or machine powered.

Question 44

What is an Automatic Feed Facing Head?

Accepted Answer

An Automatic Feed Facing Head (HEAD,FACING,AUTOMATIC FEED) is a circular shaped attachment with a radial guide or ways into which a tool-carrying slide is fitted. The slide is provided with a continuous automatic feed for feeding the tool post toward or away from the center. It is designed for mounting on a bar and is used on a lathe, drilling and/or milling machine.

Question 45

What is a Drive Head Electric Driving Mechanism?

Accepted Answer

A Drive Head Electric Driving Mechanism (DRIVING MECHANISM,ELECTRIC,DRIVE HEAD) is a device, consisting of a specially designed electric motor, which may be reversible, mounted in a housing, which also incloses a transmission gearing, communicating with a driving shaft extending to the operating end of the shaft housing, the whole mechanism being independently self-contained for ready portability. It is used to increase production on hand threading and cutting tools, and other manually operated mechanisms.

Question 46

What is a Cylinder Hone Stone And Holder?

Accepted Answer

A Cylinder Hone Stone And Holder (STONE AND HOLDER,CYLINDER HONE) is a mounted length of abrasive or combination of abrasive and cork. The stone is integral with the mount for use in conjunction with a cylinder honing tool.

Question 47

What is an Abrasive Wheel Dresser Stand?

Accepted Answer

An Abrasive Wheel Dresser Stand (STAND,ABRASIVE WHEEL DRESSER) is a device consisting of a cast steel base, a mandrel upon which the abrasive wheel can be mounted for revolving, and a diamond dressing nib. The diamond nib is mounted on a mechanical arm which is adjustable to the specific angle that wheel is to be trued or shaped. This arm is moved in a reciprocating motion causing the diamond to pass over the face of the revolving wheel thus performing the truing, shaping and dressing operation.

Question 48

What is a Drill Grinder Attachment?

Accepted Answer

A Drill Grinder Attachment (GRINDER ATTACHMENT,DRILL) is a mechanical item designed to be attached to a grinder for the purpose of holding various types of drills at the proper angle for sharpening the cutting end.

Question 49

What is a Machine Collet Chucking Holding Fixture?

Accepted Answer

A Machine Collet Chucking Holding Fixture (HOLDING FIXTURE,COLLET CHUCKING,MACHINE) is a chucklike device designed to hold, by means of a collet, various kinds of round work while performing machine or drill operations. A spacing or indexing feature may be provided to equally space holes, slots, cuts, etc. It is equipped with a lever-handle arrangement to allow for the opening, closing, and indexing of the fixture. Excludes INDEXING FIXTURE.

Question 50

What is a Buffing Wheel?

Accepted Answer

A Buffing Wheel (WHEEL,BUFFING) is a disk shaped item of loose, bonded, or solid construction having an arbor hole for attaching to a rotary power-operated tool or machine. It may be fabricated of a single piece of felt, rubber, leather, cork, or the like; a single piece of wood, leather covered; or plies of muslin, flannel, canvass, or the like sewed or cemented together. It is used for buffing and/or polishing or burnishing. Excludes BRUSH, ROTARY (as modified); WHEEL, ABRASIVE; and PAD, POLISHING AND RUBBING.

Question 51

What is a Rotary Wheel Wire Brush?

Accepted Answer

A Rotary Wheel Wire Brush (BRUSH,WIRE,ROTARY WHEEL) is a disk shaped unit having a fill section of wire material extending from the perimeter of the disk perpendicular to the axis of the hub. It is used with a rotary power-operated device for roughing, buffing and/or polishing various surfaces. See also BRUSH, WIRE, ROTARY CUP; BRUSH, WIRE, ROTARY END; and BRUSH, FIBER, ROTARY WHEEL.

Question 52

What is an Abrasive Wheel Set?

Accepted Answer

An Abrasive Wheel Set (WHEEL SET,ABRASIVE) is a group of items consisting of two or more WHEEL, ABRASIVE, of various shapes and grits, with or without mounting facilities. This may include a case or holder for storage of the items.

Question 53

What is an Expansion Mandrel Set?

Accepted Answer

An Expansion Mandrel Set (MANDREL SET,EXPANSION) is a group of two or more MANDREL, EXPANSION.

Question 54

What is a Solid Machine Mandrel Set?

Accepted Answer

A Solid Machine Mandrel Set (MANDREL SET,MACHINE,SOLID) is a group of two or more MANDREL, MACHINE, SOLID.

Question 55

What is a Drill Chuck Key?

Accepted Answer

A Drill Chuck Key (KEY,DRILL CHUCK) is a hand tool designed for tightening or loosening the jaws of a drill chuck.

Question 56

What is a Honing Machine Mandrel Set?

Accepted Answer

A Honing Machine Mandrel Set (MANDREL SET,HONING MACHINE) is a group of two more mandrels with honing stones for use with a honing machine for removing stock from the internal cylindrical surfaces of items, such as bushings in connecting rods, pistons, spindle bodies, steering gear housings, and the like. It may or may not include truing sleeves.

Question 57

What is a Lapping Plate?

Accepted Answer

A Lapping Plate (PLATE,LAPPING) is a round, rectangular, or square-shaped item manufactured from various metals. By comparison, its thickness is less than its length, width, or diameter. The lap (abrading surface) has narrow V-shaped or straight-sided grooves to facilitate abrading. Used to produce a geometrically flat or smooth surface by abrasion. Excludes BLOCK, LAPPING. See also PLATE, DUPLEX, SURFACE AND LAPPING and PLATE, SURFACE.

Question 58

What is a Lapping Block?

Accepted Answer

A Lapping Block (BLOCK,LAPPING) is a cast iron item of solid (not ribbed) rectangular construction with plain surface(s) suitable for hand application to the part to be lapped. See also PLATE, DUPLEX, SURFACE AND LAPPING; PLATE, LAPPING; and PLATE, SURFACE.

Question 59

What is an Abrasive Sheet Element Arbor?

Accepted Answer

An Abrasive Sheet Element Arbor (ARBOR,ABRASIVE SHEET ELEMENT) is a specific bar of special steel, machined and ground, consisting of a plain cylindrical shank at one end, and the other end vertically slotted for the insertion of abrasive sheet elements. In use it is rotated by the chuck of a drill press, lathe, flexible shaft machine, or pneumatic or electric drill for the internal deburring, cleaning, polishing or finishing of a cylindrical hole.

Question 60

What is a Quick Change Chuck?

Accepted Answer

A Quick Change Chuck (CHUCK,QUICK CHANGE) is an item used to hold tools, such as drills, reamers, and the like without the use of jaws. It employs a sliding collar mechanism which engages a removable adapter to facilitate installation or removal of the tool.

Question 61

What is a Quick Change Chuck Adapter?

Accepted Answer

A Quick Change Chuck Adapter (ADAPTER,QUICK CHANGE CHUCK) is a cylindrical shaped item designed to hold various cutting tools and to simplify their installation in or removal from a quick change type chuck.

Question 62

What is a Portable Power Tool Counterbalance?

Accepted Answer

A Portable Power Tool Counterbalance (COUNTERBALANCE,PORTABLE POWER TOOL) is a device consisting of an adjustable spring actuated drum or reel and a wire cable having a lifting eye or hook on one end. It is designed for aerial suspension over the work bench, assembly line or the like in holding tools in counterbalanced suspension.

Question 63

What is a Rotary Wheel Fiber Brush?

Accepted Answer

A Rotary Wheel Fiber Brush (BRUSH,FIBER,ROTARY WHEEL) is a disk shaped unit having a fill section of vegetable fiber, synthetic filament, horsehair, or animal bristle material extending from the perimeter of the disk perpendicular to the axis of the hub. It is used with a rotary power-operated device for polishing, buffing, and/or cleaning various surfaces. See also BRUSH, WIRE, ROTARY WHEEL.

Question 64

What is a Contour Gripping Vise?

Accepted Answer

A Contour Gripping Vise (VISE,CONTOUR GRIPPING) is a clamping device consisting of a base with one stationary and one manual screw actuated jaw. Each jaw has either a series of independently sliding gripping fingers (finger type) encased in a housing, or a group of adjustable gripping cams (cam type) attached to the top. The gripping surfaces of either type may be locked in a position to grip securely irregularly shaped objects of square, round, or tapered shapes, and the like. It is designed to be mounted on a machine table.

34	XX	XX	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

Additional Information for Metalworking Machinery

Machine Tool accessories

Cutting Tools for Machine Tools

Broaching Machines

Gas Welding, Heat Cutting, and Metalizing Equipment

Cutting and Forming Tools for Secondary Metalworking Machinery

Machine Tools, Portable

Punching and Shearing Machines

Accessories for Secondary Metalworking Machinery

Saws and Filing Machines

Miscellaneous Machine Tools

Miscellaneous Welding Equipment

Metal Finishing Equipment

Grinding Machines

Electric Arc Welding Equipment

Welding Positioners and Manipulators

Production Jigs, Fixtures, and Templates

Bending and Forming Machines

Forging Machinery and Hammers

Riveting Machines

Electrical and Ultrasonic Erosion Machines

Lathes

Gear Cutting and Finishing Machines

Boring Machines

Miscellaneous Welding, Soldering, and Brazing Supplies and Accessories

Wire and Metal Ribbon Forming Machines

Metal Heat Treating and Non-Thermal Treating Equipment

Milling Machines

Machine Shop Sets, Kits, and Outfits

Electric Resistance Welding Equipment

Drilling and Tapping Machines

Planers and Shapers

Machining Centers and Way-Type Machines

Manual Presses

Miscellaneous Secondary Metal Forming and Cutting Machines

Hydraulic and Pneumatic Presses, Power Driven

Mechanical Presses, Power Driven

Rolling Mills and Drawing Machines

Frequently Asked Questions (FAQ) for Federal Supply Group 34

Top 20 Supply Items Included in Federal Supply Group 34

Stock Items for FSG 34 Page 80 of 321