Premium Information is available for this item - Upgrade for $1 a day
3130-00-953-0208
Bearing Housing Liner
3130009530208 009530208 R3011-1
A rigid tubular item which fits between a bearing and its housing, designed primarily as a replaceable wear surface within the inner wall of the housing. View more Bearing Housing Liner
Managed by United States
NSN Created on 1 Jan 1962
Data Last Changed
November 2023
November 2023
NATO Update Count
24
24
NATO Data Quality
Marketplace 3130-00-953-0208
Need Help?
Request a Quotation from participating marketplace vendors
Request a Quotation from participating marketplace vendors
Related Documents 3130-00-953-0208 5+ Documents (More...)
5310-01-488-2384 5310014882384 014882384 is a washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.
5950-00-894-0888 5950008940888 008940888 is an item consisting of a partial turn as one or more turns of wire or other conductive material which constitutes one continuous untapped winding. it may be wound or formed in other than a circular manner and may be self-supporting, requiring no coil form. it is specifically designed to furnish inductive reactance in a circuit carrying radio frequency current ranging from 20 kilohertz (kilocycles) and above. it may include tuning devices, integral resistors and capacitors; however, excludes filter (as modified). the coil has only two electrical terminals. for items having tapped winding or more than one winding - see transformer, radio frequency. for coils wound on resistors, which are designed to be inserted in the circuit of a radio frequency stage to suppress high frequency parasitic oscillations, see suppressor, parasitic.
CAGE 1R301 Kesslers Incorporated in Lemoyne, PA United States
7510-14-553-2993 7510145532993 145532993 is an item of fabric or plastic film which prints via impact by a dot-matrix head, daisywheel or any other sort of element, typing. it may be used in any machine which produces a readable output such as a typewriter, printer, adding machine or handheld device.
3130-00-400-8323 Bearing Housing Liner 212-040-207-001RNCC: 5 | RNVC: 2 | DAC: 5 14 Nov 1969 3130-00-953-0208
Restrictions 3130-00-953-0208
3130-00-953-0208 is a Bearing Housing Liner that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 3130-00-953-0208
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3130-00-953-0208
- US Army (A919)
- Effective Date:
- 1 Jul 2006
- Former MOE Rule:
- A180
- Supplementary Receivers:
- BDCT
- US Air Force (FGGG)
- Effective Date:
- 1 Jul 2006
- Former MOE Rule:
- FGCX
- Brazil (YA01)
- Effective Date:
- 1 Dec 2008
- Spain (YB01)
- Effective Date:
- 1 Feb 1994
- Israel (YD01)
- Effective Date:
- 1 Mar 2017
- New Zealand (ZE01)
- Effective Date:
- 1 Apr 1991
- Republic of Korea (ZH01)
- Effective Date:
- 1 Apr 1991
- Greece (ZU01)
- Effective Date:
- 1 Jul 1995
- Turkey (ZW01)
- Effective Date:
- 1 Nov 1998
Approved Sources 3130-00-953-0208
- Part Number
- Manufacturer
- Status
- R3011-1
- Manufacturer
- 70210 - Honeywell International Inc. (Active)
- Primary Buy
- Primary Buy
- R3011-1
- 72914 - Grimes Aerospace Company (Active)
- Incomplete Secondary Reference
- Incomplete Secondary Reference
- R3011-1
- 45934 - Ontic Engineering & Manufacturing, (Active)
- Secondary Buy
- Secondary Buy
Datasheet 3130-00-953-0208
- Characteristic
- Specifications
- FIIG
- Specifications
- A23900
- General Characteristics Item Description [TEXT]
- Cres,Qq-S-763 Class 303,Dim,1.2262 In. Min,1.2272 In. Max Od,1.060 In. Min,1.080 In. Max Id,0.490 In. Min,0.510 In. Max O/A Lg,One Outside Corner Chamfered 0.015 In. Min,0.030 In. Max,By 45 Deg,All Surfaces 125 Microinches Aa
DLA Procurement Analysis 3130-00-953-0208
- Last Stock Position:
- 1 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 3130-00-953-0208
Army
- Materiel Category and Inventory Manager:
- T
- Industrial Supplies (DLA/GSA Items)
- Appropriation and Budget Activity:
- 2
- Stock Fund Secondary Items
- Management Inventory Segment:
- 2
- Non-Repairable Items(Exclusive of Insurance and Provisioning Items)
This code will be used to identify items, which are not reparable.
- Weapons System / End Item / Homogeneous Group:
- 00
- DLA/GSA Material
DLA/GSA-Managed Items that cannot be identified to a specific Army Weapons Systems/End Item
- Accounting Requirements:
- X
- Expendable item.An item of Army property coded with an ARC of X in the AMDF. Expendable items require no formal accountability after issue from a stock record account.Commercial and fabricated items similar to items coded X in the AMDF are considered expendable items.
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
NATO Stock Numbers Related to 3130-00-953-0208
3130-21-852-7788 3130-21-852-7787 3130-14-452-6837 3130-00-070-1141 3130-00-199-2243 3130-00-012-6074 3130-25-118-0696 3120-25-118-0986 3130-99-146-8109 3130-23-111-0998 3130-00-601-3581 3130-01-407-0207 3130-00-004-1015 3130-12-372-5223 3130-66-106-8164 3130-00-202-1051 3130-00-400-8322 3130-01-502-2392
Freight Information 3130-00-953-0208
3130-00-953-0208 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 123070. A Sub NMFC of X. It has a NMFC Description of HOUSINGS BEARING AND SHAFT STEEL. 3130-00-953-0208 is rated as class 65 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 64100 which rates the freight between FCL and LCL. 3130-00-953-0208 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 742 for ocean manifesting and military sealift. 3130-00-953-0208 is not classified as a special type of cargo when transported by water. 3130-00-953-0208 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 3130-00-953-0208
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
- Storage Environment
- Unheated General Purpose
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- --
- --
- --
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- 5.0" H x 5.0" W x 1.2" L
- --
- --
- --
- Any Suitable Process
- 5.0" H x 5.0" W x 1.2" L
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- --
- --
- --
- --
- --
- No special marking
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- ASTM - D5118, Fiberboard Box
Contracting Technical Data File (CTDF) 3130-00-953-0208 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: