Premium Information is available for this item - Upgrade for $1 a day
3120-01-500-6031
Thrust Washer Bearing
3120015006031 015006031 2498-00-313-5, SZ 12 2498-00-313
An item of any peripheral shape usually having one flat or spherical surface and a centrally located hole. It is designed for applications involving moving (kinetic) loads. Except for items fabricated from bearing quality synthetic (plastic) or composed of multilayer material, one bearing surface must either have a specific surface finish designation of 32 microinch (0.8 micrometre) or less, arithmetical average (aa) (arithmetic mean deviation) or one of the following conditions: be lapped or ground; have visible or detectable means of lubrication; grooves, indentations; or self-lubrication. The thickness must not exceed 25 percent of the outside diameter of the shortest distance between peripheral flats (when thickness and/or outside diameter is designated as a tolerance dimension, the maximum dimension will be used to determine compliance). Excludes straight, tubular (without flange) items having a bearing surface(s) parallel to the axis of the bore only. See also WASHER, FLAT and SPACER, SLEEVE. View more Thrust Washer Bearing
May 2023
1
Marketplace 3120-01-500-6031
Request a Quotation from participating marketplace vendors
Related Documents 3120-01-500-6031 5+ Documents (More...)
BUY NE FedMall Updated Every Day 3120-01-500-6031 RQST NE Updated Every Day 3120-01-500-6031 RQST
32 3IN TY-III 2498-00-313-32 SZ-2.5/3,TY-III 2498-00-313 PART 32 3IN TY-III 2498-00-313-32 https//www.nsnlookup.com
Thrust Washer Bearing 3120015006031 015006031 Butterfly Valve 4820015046285015046285 various -32
SZ-3.5/4, TY-III 2498-00-313 A cap designed PART 32 2.5IN TY-III 2498-00-313 PART 32 3IN TY-III 2498
/fsg-31/fsc-3120/us 3120-01-500-6031 Thrust Washer Bearing 3120015006031 015006031 A cap designed PART
A cap designed PART 32 2.5IN TY-III 2498-00-313 PART 32 3IN TY-III 2498-00-313-32 SZ-2.5/3,TY-III 2498
TY-1 2498-00-313-PART NO-19 SZ-2.5 2498-00-313-PART NO -19 SZ-4 TY-1 2498-00-313- PART NO-19 SZ-6 TY-
PART 32 2.5IN TY-III 2498-00- TY-III 2498-00-313 https//www.nsnlookup.com /fsg-31/fsc-3120/us 3120-01
A headless fastener not exceeding 12 -PART NO-3 SZ-2.5 2498-00-313 32 SZ-3.5/4, TY-III 2498-00-313
SZ-4 TY-1 2498-00-313- PART NO-19 SZ-6 TY-1 2498-00-313-PART NO-19 SZ- 5 TY-1 2498-00-313 An externally
Restrictions 3120-01-500-6031
3120-01-500-6031 is a Thrust Washer Bearing that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 3120-01-500-6031
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3120-01-500-6031
- US Navy (N9BG)
- Effective Date:
- 1 Feb 2005
- Former MOE Rule:
- N9GD
- Supplementary Collaborators:
- HDJB
Approved Sources 3120-01-500-6031
- Part Number
- Manufacturer
- Status
- 2498-00-313-5, SZ 12
- Manufacturer
- 35795 - Leslie Controls, Inc. (Active)
- Primary Buy
- Primary Buy
- 2498-00-313
- 35795 - Leslie Controls, Inc. (Active)
- Informational Drawing
- Informational Drawing
Datasheet 3120-01-500-6031
- Characteristic
- Specifications
- FIIG
- Specifications
- A045A0
- Center Hole Shape Style [ABMX]
- Round
- Corner Shape [BZLX]
- Square All Corners
- Cross-Sectional Shape Style [AAGR]
- Rectangular
- Diameter [ABMZ]
- 1.2650 Inches Minimum And 1.2800 Inches Maximum
- End Item Identification [AGAV]
- Size 12 Butterfly Valve
- Material [MATT]
- Steel Comp 316 Overall
- Outside Diameter [ABKV]
- 1.6100 Inches Minimum And 1.6200 Inches Maximum
- Material Document And Classification [MDCL]
- Astm-A479 Assn Std Single Material Response Overall
- Overall Thickness [ADUM]
- 0.3240 Inches Minimum And 0.3260 Inches Maximum
- Style Designator [STYL]
- Round
DLA Procurement Analysis 3120-01-500-6031
Management Data 3120-01-500-6031
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Similar Supply Items to 3120-01-500-6031
Freight Information 3120-01-500-6031
3120-01-500-6031 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 114850. A Sub NMFC of X. It has a NMFC Description of BEARING/BUSHING O/T BALL/ROLLER I/S. 3120-01-500-6031 is rated as class 70 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 58880 which rates the freight between FCL and LCL. 3120-01-500-6031 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 742 for ocean manifesting and military sealift. 3120-01-500-6031 is not classified as a special type of cargo when transported by water. 3120-01-500-6031 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Contracting Technical Data File (CTDF) 3120-01-500-6031 October 2021
Criticality and Quality
- Critical Item Code:
- X
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- F
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Y
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: