Premium Information is available for this item - Upgrade for $1 a day
3120-01-441-5655
Sleeve Bushing
3120014415655 014415655 SAE-AS14237 MS14237A14P131 AS14237
A tubular shaped unthreaded item with or without a flange at one end designed to be inserted into a hole to reduce the inside diameter of the hole and to protect the surrounding body structure from damage resulting from stress, strain, and/or vibration. The overall length must exceed 25 percent of the outside diameter or the shortest distance between peripheral flats of the body. Includes items which are divided into two or more segments which includes 180 degrees (3.141 radians) or less of the bearing periphery. For items made of rubber, see BUSHING, NONMETALLIC. See also BEARING, SLEEVE; BUSHING, TAPERED; SPACER, SLEEVE; INSULATOR, BUSHING; and BUSHING, ELECTRICAL CONDUCTOR. Excludes BUSHING, DRILL, JIG. View more Sleeve Bushing
November 2023
4
Marketplace 3120-01-441-5655
Request a Quotation from participating marketplace vendors
Related Documents 3120-01-441-5655 5+ Documents (More...)
/fsg-31/fsc-3120/us
MS14237A14P131 BUSHING,SLEEVE 76 EA NS Request Quotation AS14237 BUSHING,SLEEVE 280 EA NS Request Quotation
MS14237B04P017 A tubular shaped unthreaded item with or without a flange at one end designed SAE AS14237
/fsg-31/fsc-3120/us
Bushing3120014415655 014415655 SAE-AS14237 MS14237A14P131 AS14237 A tubular shaped unthreaded item with
for $1 a day Upgrade your Account Upgrade 3120-01-384-7391Sleeve Bushing3120013847391 013847391 SAE-AS14237
/fsg-31/fsc-3120/us
Bushing3120014415655 014415655 SAE-AS14237 MS14237A14P131 AS14237 A tubular shaped unthreaded item with
for $1 a day Upgrade your Account Upgrade 3120-01-384-7391Sleeve Bushing3120013847391 013847391 SAE-AS14237
Sleeve Bushing 3120014415655 014415655 for $1 a day Upgrade your Account Upgrade 3120-01-441-5655Sleeve
Bushing3120014415655 014415655 SAE-AS14237 one MS14237B04P017 A tubular shaped unthreaded item with
SAE AS14237 MS14237B04P017 A tubular shaped unthreaded item with or without a flange at one end designed
for $1 a day Upgrade your Account Upgrade 3120-01-697-0155Sleeve Bushing3120016970155 016970155 SAE-AS14237
Restrictions 3120-01-441-5655
3120-01-441-5655 is a Sleeve Bushing that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 3120-01-441-5655
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3120-01-441-5655
- US Air Force (FGGG)
- Effective Date:
- 1 Sep 2006
- Former MOE Rule:
- FGCX
- US Navy (N9BG)
- Effective Date:
- 1 Dec 2013
- Supplementary Collaborators:
- GG
Approved Sources 3120-01-441-5655
- Part Number
- Manufacturer
- Status
- SAE-AS14237
- Manufacturer
- 0U583 - Sae International (Active)
- Incomplete Reference
- Incomplete Reference
- MS14237A14P131
- 0U583 - Sae International (Active)
- Primary Buy
- Primary Buy
- MS14237A14P131
- 96906 - Military Standards (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- AS14237
- 0U583 - Sae International (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- AS14237
- 81343 - Society Of Automotive Engineers Inc (Replaced)
- Canceled/Obsolete
- Canceled/Obsolete
- MS14237A14P131
- 81343 - Society Of Automotive Engineers Inc (Replaced)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 3120-01-441-5655
- Characteristic
- Specifications
- FIIG
- Specifications
- A045A0
- Body Inside Diameter [ADAS]
- 0.8570 Inches Minimum And 0.8670 Inches Maximum
- Body Outside Diameter [ADAR]
- 1.0641 Inches Minimum And 1.0651 Inches Maximum
- Corner Shape [BZLX]
- Square All Corners
- Material [MATT]
- Copper Alloy 630 Overall
- Material Document And Classification [MDCL]
- Ams 4640 Assn Std Single Material Response Overall
- Overall Length [ABHP]
- 1.3050 Inches Minimum And 1.3100 Inches Maximum
- Style Designator [STYL]
- Solid, Plain, No Outside Flanges
- Surface Treatment Document And Classification [STDC]
- Qq-P-416,Ty 2,Cl 2 Fed Spec Single Treatment Response Left End Surface Of Body
- Surface Treatment Document And Classification [STDC]
- Qq-P-416,Ty 2,Cl 2 Fed Spec Single Treatment Response Outside Diameter Surface Of Body
- Surface Treatment Document And Classification [STDC]
- Qq-P-416,Ty 2,Cl 2 Fed Spec Single Treatment Response Right End Surface Of Body
- Surface Treatment [SFTT]
- Cadmium Left End Surface Of Body And Chromate Left End Surface Of Body
- Surface Treatment [SFTT]
- Cadmium Outside Diameter Surface Of Body And Chromate Outside Diameter Surface Of Body
- Surface Treatment [SFTT]
- Cadmium Right End Surface Of Body And Chromate Right End Surface Of Body
DLA Procurement Analysis 3120-01-441-5655
Management Data 3120-01-441-5655
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Similar Supply Items to 3120-01-441-5655
Freight Information 3120-01-441-5655
3120-01-441-5655 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 114800. A Sub NMFC of X. It has a NMFC Description of BEARING,ROLLER,THRUST. 3120-01-441-5655 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 58850 which rates the freight between FCL and LCL. 3120-01-441-5655 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 742 for ocean manifesting and military sealift. 3120-01-441-5655 is not classified as a special type of cargo when transported by water. 3120-01-441-5655 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 3120-01-441-5655
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Plated/Coated Item
- 2lb or less, one dimension 2" or less, other dimensions less than 24"
- Above 110G
- Special Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- --
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- --
- --
- --
- --
- --
- No special marking
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- ASTM - D5118, Fiberboard Box
Contracting Technical Data File (CTDF) 3120-01-441-5655 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- K
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: