Premium Information is available for this item - Upgrade for $1 a day
3120-01-437-7429
Thrust Washer Bearing
3120014377429 014377429 10560363 25830
An item of any peripheral shape usually having one flat or spherical surface and a centrally located hole. It is designed for applications involving moving (kinetic) loads. Except for items fabricated from bearing quality synthetic (plastic) or composed of multilayer material, one bearing surface must either have a specific surface finish designation of 32 microinch (0.8 micrometre) or less, arithmetical average (aa) (arithmetic mean deviation) or one of the following conditions: be lapped or ground; have visible or detectable means of lubrication; grooves, indentations; or self-lubrication. The thickness must not exceed 25 percent of the outside diameter of the shortest distance between peripheral flats (when thickness and/or outside diameter is designated as a tolerance dimension, the maximum dimension will be used to determine compliance). Excludes straight, tubular (without flange) items having a bearing surface(s) parallel to the axis of the bore only. See also WASHER, FLAT and SPACER, SLEEVE. View more Thrust Washer Bearing
May 2023
1
Marketplace 3120-01-437-7429
Request a Quotation from participating marketplace vendors
Updated Every 15 Minutes 
Updated Every Day Updated Every Day 
Updated Every Day Related Documents 3120-01-437-7429 5+ Documents (More...)
(Identification) 1/3 NSN 3120-01-437-7429 (Identification) 2/3 NSN 3120-01-437-7429 (Identification
3120-01-437-7429 RQST Updated Every Day 3120-01-437-7429 RQST NE Related Documents 3120-01-437-7429
-000425-25830 Two or more CONTACT, ELECTRICAL on a common mounting or mounted on each other Electrical
Contact Assembly 5999142712505425-25830-000425-25830 Two or more CONTACT, ELECTRICAL on Electrical Contact
-LP-X-013201-25830-04-23201-25830-04-2-01TORP4B2 Managed by United Kingdom NSN Created RQST NE Updated
-04-2 3201-25830- https//www.nsnlookup.com Cap Blanking Assemb 5935991622622991622622 -LP-X-01 3201-25830
SA8230-25830 CV186661 An externally threaded fastener designed for insertion through holes in assembled
99-975-0820 United Kingdom (ZK) Approved Sources 5306-99-975-0820 Part NumberManufacturerStatus8230-25830
-25830 4-25830 Managed by Chock 5950150093137 150093137,4 25830 https//www.nsnlookup.com /fsg-59/fsc
-01 3201-25830-04-2 3201-25830- https /fsc-5950/it 5950-15-009-3137 Chock 5950150093137 150093137,4-25830
Restrictions 3120-01-437-7429
3120-01-437-7429 is a Thrust Washer Bearing that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 3120-01-437-7429
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3120-01-437-7429
- National Security Agency (DGX1)
- Effective Date:
- 1 Mar 2014
- US Marine Corps (MC41)
- Effective Date:
- 17 Aug 2012
- Former MOE Rule:
- MC04
Approved Sources 3120-01-437-7429
- Part Number
- Manufacturer
- Status
- 25830
- Manufacturer
- 45320 - Paccar Government Group Co (Obsolete)
- Original Design
- Original Design
- 10560363
- 56161 - General Dynamics Land Systems (Active)
- Secondary Buy
- Secondary Buy
Datasheet 3120-01-437-7429
- Characteristic
- Specifications
- FIIG
- Specifications
- A045A0
- Style Designator [STYL]
- Round
- Outside Diameter [ABKV]
- 2.1770 Inches Nominal
- Corner Shape [BZLX]
- Square All Corners
- Cross-Sectional Shape Style [AAGR]
- Rectangular
- Overall Thickness [ADUM]
- 0.0930 Inches Nominal
- Center Hole Shape Style [ABMX]
- Round
- Diameter [ABMZ]
- 1.5020 Inches Nominal
DLA Procurement Analysis 3120-01-437-7429
Management Data 3120-01-437-7429
Similar Supply Items to 3120-01-437-7429
Freight Information 3120-01-437-7429
3120-01-437-7429 has freight characteristics managed by the Southwestern Power Administration.It has a National Motor Freight Classification (NMFC) of 114850. A Sub NMFC of X. It has a NMFC Description of BEARING/BUSHING O/T BALL/ROLLER I/S. 3120-01-437-7429 is rated as class 70 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 58880 which rates the freight between FCL and LCL. 3120-01-437-7429 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 742 for ocean manifesting and military sealift. 3120-01-437-7429 is not classified as a special type of cargo when transported by water. 3120-01-437-7429 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 3120-01-437-7429
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- --
- Over 10lb
- Less than 85G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- 4.0" H x 4.0" W x 1.0" L
- --
- --
- --
- Any Suitable Process
- 4.0" H x 4.0" W x 1.0" L
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- --
- --
- --
- --
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
- No special marking
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- ASTM - D5118, Fiberboard Box
Procurement History 3120-01-437-7429 3 Records
Contracting Technical Data File (CTDF) 3120-01-437-7429 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Y
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: