Premium Information is available for this item - Upgrade for $1 a day
3120-01-392-3357
Sleeve Bearing
3120013923357 013923357 KRJ4UDSB-008S 07-282-04-008 AHJF04C(L1)008 04A076-04C008 AHJF04C008 KDJ04C008-342
A tubular shaped item with or without flange(s) designed to reduce friction and carry a kinetic load on the surface(s) parallel to the axis of the bore. It must have a visible or detectable means of lubrication or be self-lubricated. The over all length must exceed 25 percent of the outside diameter or the shortest distance between peripheral flats of the body, except for straight tubular (without flange or shoulder) items having a bearing surface(s) parallel to the axis of the bore only. Includes items which are divided into two or more segments which include 180 degrees (3.141 radians) or less of the bearing periphery. See also BUSHING, SLEEVE; SPACER, SLEEVE; and WASHER (as modified). Excludes PIN, HOLLOW. View more Sleeve Bearing
May 2023
6
Marketplace 3120-01-392-3357
Request a Quotation from participating marketplace vendors
Related Documents 3120-01-392-3357 5+ Documents (More...)
Sleeve Bearing 3120013923357 013923357 392-3357 https//www.nsnlookup.com /cage Sargent Aerospace
/fsg-31/fsc-3120/us
Restrictions 3120-01-392-3357
3120-01-392-3357 is a Sleeve Bearing that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 3120-01-392-3357
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3120-01-392-3357
- US Air Force (FNN5)
- Effective Date:
- 1 Jun 2003
- Former MOE Rule:
- FGCX
Approved Sources 3120-01-392-3357
- Part Number
- Manufacturer
- Status
- KRJ4UDSB-008S
- Manufacturer
- 50632 - Kamatics Corporation (Active)
- Primary Buy
- Primary Buy
- 07-282-04-008
- 09455 - Rbc Transport Dynamics Corp (Active)
- Secondary Buy
- Secondary Buy
- AHJF04C(L1)008
- 15860 - New Hampshire Ball Bearings Inc (Active)
- Secondary Buy
- Secondary Buy
- 04A076-04C008
- 1W025 - Northrop Grumman Systems Corp (Active)
- Secondary Buy
- Secondary Buy
- AHJF04C008
- 50294 - New Hampshire Ball Bearings Inc (Active)
- Secondary Buy
- Secondary Buy
- KDJ04C008-342
- 97613 - Sargent Aerospace & Defense, Llc (Active)
- Secondary Buy
- Secondary Buy
Datasheet 3120-01-392-3357
- Characteristic
- Specifications
- FIIG
- Specifications
- A045A0
- Material [MATT]
- Plastic Polytetrafluoroethylene Inner Layer
- Material [MATT]
- Steel Comp 630 Outer Layer
- Style Designator [STYL]
- Solid, External Flange One End
- Overall Length [ABHP]
- 0.2500 Inches Nominal
- Body Outside Diameter [ADAR]
- 0.3760 Inches Nominal
- Body Inside Diameter [ADAS]
- 0.2515 Inches Nominal
- Flange Outside Diameter [AEPR]
- 0.7500 Inches Nominal
- Flange Width [AGFF]
- 0.0625 Inches Nominal
- Corner Shape [BZLX]
- Square Outside Left Corner
- Corner Shape [BZLX]
- Square Outside Right Corner
DLA Procurement Analysis 3120-01-392-3357
Management Data 3120-01-392-3357
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
NATO Stock Numbers Related to 3120-01-392-3357
Freight Information 3120-01-392-3357
3120-01-392-3357 has freight characteristics.. 3120-01-392-3357 has a variance between NMFC and UFC when transported by rail and the description should be consulted.
Contracting Technical Data File (CTDF) 3120-01-392-3357 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Y
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: