Premium Information is available for this item - Upgrade for $1 a day
3120-01-377-0788
Thrust Washer Bearing
3120013770788 013770788 ASTM B438 MS21783-12A253 MS21783
An item of any peripheral shape usually having one flat or spherical surface and a centrally located hole. It is designed for applications involving moving (kinetic) loads. Except for items fabricated from bearing quality synthetic (plastic) or composed of multilayer material, one bearing surface must either have a specific surface finish designation of 32 microinch (0.8 micrometre) or less, arithmetical average (aa) (arithmetic mean deviation) or one of the following conditions: be lapped or ground; have visible or detectable means of lubrication; grooves, indentations; or self-lubrication. The thickness must not exceed 25 percent of the outside diameter of the shortest distance between peripheral flats (when thickness and/or outside diameter is designated as a tolerance dimension, the maximum dimension will be used to determine compliance). Excludes straight, tubular (without flange) items having a bearing surface(s) parallel to the axis of the bore only. See also WASHER, FLAT and SPACER, SLEEVE. View more Thrust Washer Bearing
November 2023
2
Marketplace 3120-01-377-0788
Request a Quotation from participating marketplace vendors
Related Documents 3120-01-377-0788 5+ Documents (More...)
MS21783-12A254 BEARING,WASHER,THRUST 37 EA NS Request Quotation MS21783 BEARING,WASHER,THRUST 74 EA NS
/fsg-31/fsc-3120/us 3120-01-377-0788 Thrust Washer Bearing 3120013770788 013770788 MS21783-12A253 BEARING
MS21783 BEARING,WASHER,THRUST 74 EA NS Request Quotation ASTM-B438 BEARING,WASHER,THRUST 73 EA NS Request
MS21783-09204 BEARING WASHER 26 EA NS Request Quotation Subscribe to View Vendor Details...
ASTM B 438 MS21783-14344 35790 TB-1434 SC3110-0018-1 TT2101-1 An item of any peripheral shape usually
81346 - American Society For Testing And (Active) Incomplete Reference RNCC 3 RNVC 1 DAC E MS21783 1
MS21783-12A254 BEARING,WASHER,THRUST 2 EA NS Request Quotation Subscribe to View Vendor Details...
MS21783-12A254 BEARING,WASHER,THRUST 37 EA NS Request Quotation MS21783 BEARING,WASHER,THRUST 74 EA NS
MS21783-10204 BEARING 167 EA NS Request Quotation Subscribe to View Vendor Details...
MS21783-12A254 BEARING,WASHER,THRUST 2 EA NS Request Quotation Subscribe to View Vendor Details...
Restrictions 3120-01-377-0788
3120-01-377-0788 is a Thrust Washer Bearing that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 3120-01-377-0788
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3120-01-377-0788
- US Army (A919)
- Effective Date:
- 1 Sep 2006
- Former MOE Rule:
- A180
- Supplementary Receivers:
- AZ
- US Air Force (FGGG)
- Effective Date:
- 1 Sep 2006
Approved Sources 3120-01-377-0788
- Part Number
- Manufacturer
- Status
- MS21783-12A253
- Manufacturer
- 81346 - American Society For Testing And (Active)
- Primary Buy
- Primary Buy
- ASTM B438
- 81346 - American Society For Testing And (Active)
- Incomplete Secondary Reference
- Incomplete Secondary Reference
- MS21783-12A253
- 96906 - Military Standards (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- MS21783
- 96906 - Military Standards (Active)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 3120-01-377-0788
- Characteristic
- Specifications
- FIIG
- Specifications
- A045A0
- Center Hole Shape Style [ABMX]
- Round
- Corner Shape [BZLX]
- Square All Corners
- Cross-Sectional Shape Style [AAGR]
- Rectangular
- Diameter [ABMZ]
- 0.7650 Inches Nominal
- Material Document And Classification [MDCL]
- Mil-B-5687, Ty1, Gr1 Mil Spec Single Material Response Overall
- Material [MATT]
- Copper Alloy 841 Overall
- Outside Diameter [ABKV]
- 1.5520 Inches Minimum And 1.5720 Inches Maximum
- Overall Thickness [ADUM]
- 0.0940 Inches Nominal
- Style Designator [STYL]
- Round
- Surface Finish [CSYM]
- 32.0 Microinches Left Side
- Surface Finish [CSYM]
- 32.0 Microinches Right Side
Weapon Systems (WSDC) 3120-01-377-0788
DLA Procurement Analysis 3120-01-377-0788
- Last Stock Position:
- 193 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 3120-01-377-0788
Army
- Materiel Category and Inventory Manager:
- T
- Industrial Supplies (DLA/GSA Items)
- Appropriation and Budget Activity:
- 2
- Stock Fund Secondary Items
- Management Inventory Segment:
- 2
- Non-Repairable Items(Exclusive of Insurance and Provisioning Items)
This code will be used to identify items, which are not reparable.
- Weapons System / End Item / Homogeneous Group:
- 00
- DLA/GSA Material
DLA/GSA-Managed Items that cannot be identified to a specific Army Weapons Systems/End Item
- Accounting Requirements:
- X
- Expendable item.An item of Army property coded with an ARC of X in the AMDF. Expendable items require no formal accountability after issue from a stock record account.Commercial and fabricated items similar to items coded X in the AMDF are considered expendable items.
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
NATO Stock Numbers Related to 3120-01-377-0788
Freight Information 3120-01-377-0788
3120-01-377-0788 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 114870. A Sub NMFC of X. It has a NMFC Description of BEARING/BUSHING METAL. 3120-01-377-0788 is rated as class 77.5 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 58890 which rates the freight between FCL and LCL. 3120-01-377-0788 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 742 for ocean manifesting and military sealift. 3120-01-377-0788 is not classified as a special type of cargo when transported by water. 3120-01-377-0788 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 3120-01-377-0788
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Plated/Coated Item
- 2lb or less, one dimension 2" or less, other dimensions less than 24"
- Above 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- --
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- --
- --
- --
- MIL-DTL-117, Type II, Class C, Style 1, Heavy Duty, Waterproof, Greaseproof, Opaque Bag
- No special marking
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
Procurement History 3120-01-377-0788 1 Records
Contracting Technical Data File (CTDF) 3120-01-377-0788 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- S
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: