Premium Information is available for this item - Upgrade for $1 a day
3120-01-357-8959
Sleeve Bushing
3120013578959 013578959 4080111 4079089 4080018 4080019 4079029
A tubular shaped unthreaded item with or without a flange at one end designed to be inserted into a hole to reduce the inside diameter of the hole and to protect the surrounding body structure from damage resulting from stress, strain, and/or vibration. The overall length must exceed 25 percent of the outside diameter or the shortest distance between peripheral flats of the body. Includes items which are divided into two or more segments which includes 180 degrees (3.141 radians) or less of the bearing periphery. For items made of rubber, see BUSHING, NONMETALLIC. See also BEARING, SLEEVE; BUSHING, TAPERED; SPACER, SLEEVE; INSULATOR, BUSHING; and BUSHING, ELECTRICAL CONDUCTOR. Excludes BUSHING, DRILL, JIG. View more Sleeve Bushing
November 2023
8
Marketplace 3120-01-357-8959
Request a Quotation from participating marketplace vendors
Related Documents 3120-01-357-8959 5+ Documents (More...)
Sleeve Bushing 3120013578959 013578959 Documents 3120-01-357-8959 5+ Documents ( More... ) https
Sleeve Bushing 3120013578959 013578959 of another item. it may be threaded on one end. https//www.nsnlookup.com
Restrictions 3120-01-357-8959
3120-01-357-8959 is a Sleeve Bushing that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 3120-01-357-8959
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3120-01-357-8959
- US Air Force (FXGG)
- Effective Date:
- 1 Sep 2006
- Former MOE Rule:
- FXCX
- US Navy (N9BG)
- Effective Date:
- 1 Dec 2013
- Supplementary Collaborators:
- GG
- Singapore (YJ01)
- Effective Date:
- 1 Sep 2003
- Republic of Korea (ZH01)
- Effective Date:
- 1 Dec 1997
- Greece (ZU01)
- Effective Date:
- 1 May 2008
Approved Sources 3120-01-357-8959
- Part Number
- Manufacturer
- Status
- 4080111
- Manufacturer
- 77445 - Rtx Corporation (Active)
- Primary Buy
- Primary Buy
- 4079089
- 77445 - Rtx Corporation (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- 4080018
- 77445 - Rtx Corporation (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- 4080019
- 77445 - Rtx Corporation (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- 4079029
- 77445 - Rtx Corporation (Active)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 3120-01-357-8959
- Characteristic
- Specifications
- FIIG
- Specifications
- A045A0
- End Item Identification [AGAV]
- F100pw0229 Engine
- Body Inside Diameter [ADAS]
- 0.3980 Inches Minimum And 0.3995 Inches Maximum
- Body Outside Diameter [ADAR]
- 0.5458 Inches Minimum And 0.5465 Inches Maximum
- Corner Shape [BZLX]
- Chamfered Left Flange Outside Right Corner
- Corner Shape [BZLX]
- Square Inside Right Corner
- Corner Shape [BZLX]
- Square Inside Left Corner
- Corner Shape [BZLX]
- Square Outside Left Corner
- Corner Shape [BZLX]
- Square Left Flange Body Corner
- Corner Shape [BZLX]
- Square Outside Right Corner
- Flange Outside Diameter [AEPR]
- 0.6550 Inches Minimum And 0.6600 Inches Maximum
- Flange Width [AGFF]
- 0.1100 Inches Minimum And 0.1120 Inches Maximum
- Material [MATT]
- Carbon Inside Diameter Surface Of Body
- Material [MATT]
- Nickel Alloy Outside Diameter Surface Of Body
- Material [MATT]
- Nickel Alloy Outside Diameter Surface Of Flange
- Material Document And Classification [MDCL]
- Ams 5666 Assn Std Single Material Response Outside Diameter Surface Of Body
- Material Document And Classification [MDCL]
- Ams 5666 Assn Std Single Material Response Outside Diameter Surface Of Flange
- Overall Length [ABHP]
- 0.2400 Inches Minimum And 0.2520 Inches Maximum
- Special Features [FEAT]
- Used On Compressor Stator Bell Crank
- Style Designator [STYL]
- Solid, External Flange One End
- Surface Finish [CSYM]
- 32.0 Microinches Outside Diameter Surface Of Body
- Surface Finish [CSYM]
- 90.0 Microinches Inside Diameter Surface Of Body
- Surface Finish [CSYM]
- 90.0 Microinches Left End Surface Of Body And Flange
Weapon Systems (WSDC) 3120-01-357-8959
DLA Procurement Analysis 3120-01-357-8959
- Last Stock Position:
- 59 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 3120-01-357-8959
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- NZ
- PRATT & WHITNEY JET ENGINES & COMPONENTS, F-100–P-100
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
NATO Stock Numbers Related to 3120-01-357-8959
Freight Information 3120-01-357-8959
3120-01-357-8959 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 115620. A Sub NMFC of X. It has a NMFC Description of BUSHINGS NOI I/S. 3120-01-357-8959 is rated as class 65 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 59240 which rates the freight between FCL and LCL. 3120-01-357-8959 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 742 for ocean manifesting and military sealift. 3120-01-357-8959 is not classified as a special type of cargo when transported by water. 3120-01-357-8959 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 3120-01-357-8959
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- --
- --
- --
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- --
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- --
- --
- --
- --
- No special marking
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- ASTM - D5118, Fiberboard Box
Procurement History 3120-01-357-8959 2 Records
Contracting Technical Data File (CTDF) 3120-01-357-8959 October 2021
Criticality and Quality
- Critical Item Code:
- X
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- T
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: