Premium Information is available for this item - Upgrade for $1 a day
3120-01-342-0394
Rod End Plain Bearing
3120013420394 013420394 ARB4E206W13 LE131-0035-0104
A detachable assembly in or on which a journal, gudgeon, pivot, or the like moves. It is used to carry a load and to reduce sliding friction. It does not employ rolling elements. The outer member of the assembly is modified to provide a shank. The inner member may be either a plain spherical bearing or a sleeve bearing. Excludes BEARING, PLAIN, SPHERICAL and BEARING, PLAIN, SELF-ALIGNING. View more Rod End Plain Bearing
May 2023
1
Marketplace 3120-01-342-0394
Request a Quotation from participating marketplace vendors
Related Documents 3120-01-342-0394 2+ Documents (More...)
/fsg-31/fsc-3120/us
Restrictions 3120-01-342-0394
3120-01-342-0394 is a Rod End Plain Bearing that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 3120-01-342-0394
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3120-01-342-0394
- US Air Force (FGGG)
- Effective Date:
- 1 Feb 2005
- Former MOE Rule:
- FGCX
Approved Sources 3120-01-342-0394
- Part Number
- Manufacturer
- Status
- ARB4E206W13
- Manufacturer
- 15860 - New Hampshire Ball Bearings Inc (Active)
- Primary Buy
- Primary Buy
- LE131-0035-0104
- 43999 - The Boeing Company (Active)
- Secondary Buy
- Secondary Buy
Datasheet 3120-01-342-0394
- Characteristic
- Specifications
- FIIG
- Specifications
- A045A0
- Bore Center To Shank End Distance [AGGG]
- 1.5520 Inches Minimum And 1.5720 Inches Maximum
- Bore Diameter [ABXV]
- 0.2495 Inches Minimum And 0.2515 Inches Maximum
- Hardness Rating [CQFM]
- 55.0 Rockwell C Minimum Inner Member
- Material [MATT]
- Steel Comp 440C Inner Membersteel Comp 630 Race Insertsteel Comp 630 Rod End Body
- Outer Member Width [AGGH]
- 0.3370 Inches Minimum And 0.3470 Inches Maximum
- Outer Member Outside Diameter [AGGF]
- 0.7710 Inches Minimum And 0.7910 Inches Maximum
- Inner Member Width [AGGJ]
- 0.4320 Inches Minimum And 0.4370 Inches Maximum
- Material Document And Classification [MDCL]
- Ams 5630 Assn Std Single Material Response Inner Memberams 5643 Assn Std Single Material Response Race Insertams 5643 Assn Std Single Material Response Rod End Body
- Shank Thread Length [AGGY]
- 1.0000 Inches Nominal
- Shank Style [AAZF]
- Externally Threaded
- Overall Length [ABHP]
- 1.9520 Inches Nominal
- Thread Series Designator [THSD]
- Unf
- Static Radial Load Rating [AGKP]
- 4200 Pounds
- Style Designator [STYL]
- Ball Type
- Thread Direction [AAJF]
- Right-Hand
- Thread Class [AAJD]
- 3A
- Thread Diameter [AWDP]
- 0.312 Inches Nominal
- Thread Quantity Per Inch [CMLP]
- 24
Weapon Systems (WSDC) 3120-01-342-0394
DLA Procurement Analysis 3120-01-342-0394
Management Data 3120-01-342-0394
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
NATO Stock Numbers Related to 3120-01-342-0394
Freight Information 3120-01-342-0394
3120-01-342-0394 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 114820. A Sub NMFC of X. It has a NMFC Description of BEARINGS/BUSHINGS NOI BALL/ROLLER. 3120-01-342-0394 is rated as class 77.5 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 58860 which rates the freight between FCL and LCL. 3120-01-342-0394 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 742 for ocean manifesting and military sealift. 3120-01-342-0394 is not classified as a special type of cargo when transported by water. 3120-01-342-0394 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Contracting Technical Data File (CTDF) 3120-01-342-0394 October 2021
Criticality and Quality
- Critical Item Code:
- X
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- L
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Y
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: