Premium Information is available for this item - Upgrade for $1 a day
3120-01-341-3212
Sleeve Bearing
3120013413212 013413212 07-282-07-006 AHJF07C(L1)006 KRJ7-UDSB-006 KDJ07C006-342 AHJF07C006 04A076-07C006
A tubular shaped item with or without flange(s) designed to reduce friction and carry a kinetic load on the surface(s) parallel to the axis of the bore. It must have a visible or detectable means of lubrication or be self-lubricated. The over all length must exceed 25 percent of the outside diameter or the shortest distance between peripheral flats of the body, except for straight tubular (without flange or shoulder) items having a bearing surface(s) parallel to the axis of the bore only. Includes items which are divided into two or more segments which include 180 degrees (3.141 radians) or less of the bearing periphery. See also BUSHING, SLEEVE; SPACER, SLEEVE; and WASHER (as modified). Excludes PIN, HOLLOW. View more Sleeve Bearing
May 2023
16
Marketplace 3120-01-341-3212
Request a Quotation from participating marketplace vendors
Related Documents 3120-01-341-3212 5+ Documents (More...)
/fsg-31/fsc-3120/us
Sleeve Bearing 3120013413212 013413212 341-3212 https//www.nsnlookup.com /cage New Hampshire Ball
/fsg-31/fsc-3120/us
Sleeve Bearing 3120013413212 013413212 More... ) https//www.nsnlookup.com /cage Rbc Transport Dynamics
/fsg-31/fsc-3120/us
Sleeve Bearing 3120013413212 013413212 https//www.nsnlookup.com /cage New Hampshire Ball Bearings
/fsg-31/fsc-3120/us
Restrictions 3120-01-341-3212
3120-01-341-3212 is a Sleeve Bearing that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 3120-01-341-3212
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3120-01-341-3212
- US Air Force (FGGG)
- Effective Date:
- 1 Jul 2006
- Former MOE Rule:
- FGCX
Approved Sources 3120-01-341-3212
- Part Number
- Manufacturer
- Status
- 04A076-07C006
- Manufacturer
- 15860 - New Hampshire Ball Bearings Inc (Active)
- Primary Buy
- Primary Buy
- 04A076-07C006
- 73134 - Roller Bearing Co Of America Inc (Active)
- Primary Buy
- Primary Buy
- 04A076-07C006
- 50294 - New Hampshire Ball Bearings Inc (Active)
- Primary Buy
- Primary Buy
- 04A076-07C006
- 50632 - Kamatics Corporation (Active)
- Primary Buy
- Primary Buy
- 04A076-07C006
- 97613 - Sargent Aerospace & Defense, Llc (Active)
- Primary Buy
- Primary Buy
- 07-282-07-006
- 73134 - Roller Bearing Co Of America Inc (Active)
- Incomplete Secondary Reference
- Incomplete Secondary Reference
- AHJF07C(L1)006
- 15860 - New Hampshire Ball Bearings Inc (Active)
- Incomplete Secondary Reference
- Incomplete Secondary Reference
- KRJ7-UDSB-006
- 50632 - Kamatics Corporation (Active)
- Incomplete Secondary Reference
- Incomplete Secondary Reference
- KDJ07C006-342
- 97613 - Sargent Aerospace & Defense, Llc (Active)
- Incomplete Secondary Reference
- Incomplete Secondary Reference
- AHJF07C006
- 50294 - New Hampshire Ball Bearings Inc (Active)
- Incomplete Secondary Reference
- Incomplete Secondary Reference
- 07-282-07-006
- 09455 - Rbc Transport Dynamics Corp (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- 04A076-07C006
- 1W025 - Northrop Grumman Systems Corp (Active)
- Vendor Drawing
- Vendor Drawing
Datasheet 3120-01-341-3212
- Characteristic
- Specifications
- FIIG
- Specifications
- A045A0
- Body Inside Diameter [ADAS]
- 0.4380 Inches Minimum And 0.4390 Inches Maximum
- Body Outside Diameter [ADAR]
- 0.5633 Inches Minimum And 0.5638 Inches Maximum
- Corner Shape [BZLX]
- Square Inside Right Corner
- Corner Shape [BZLX]
- Square Inside Left Corner
- Corner Shape [BZLX]
- Square Outside Left Corner
- Corner Shape [BZLX]
- Square Left Flange Outside Right Corner
- Corner Shape [BZLX]
- Square Outside Right Corner
- Corner Shape [BZLX]
- Undercut Left Flange Body Corner
- Flange Outside Diameter [AEPR]
- 0.9170 Inches Minimum And 0.9370 Inches Maximum
- Flange Width [AGFF]
- 0.0575 Inches Minimum And 0.0625 Inches Maximum
- Material [MATT]
- Plastic Polytetrafluoroethylene Inner Layer
- Material [MATT]
- Steel Comp 630 Outer Layer
- Material Document And Classification [MDCL]
- Ams 5643 Assn Std Single Material Response Outer Layer
- Overall Length [ABHP]
- 0.2345 Inches Minimum And 0.2495 Inches Maximum
- Style Designator [STYL]
- Solid, External Flange One End
- Surface Finish [CSYM]
- 63.0 Microinches Outside Diameter Surface Of Body
Weapon Systems (WSDC) 3120-01-341-3212
DLA Procurement Analysis 3120-01-341-3212
Management Data 3120-01-341-3212
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of āLā or āFā, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
NATO Stock Numbers Related to 3120-01-341-3212
Freight Information 3120-01-341-3212
3120-01-341-3212 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 114800. A Sub NMFC of X. It has a NMFC Description of BEARING,ROLLER,THRUST. 3120-01-341-3212 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 58850 which rates the freight between FCL and LCL. 3120-01-341-3212 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 742 for ocean manifesting and military sealift. 3120-01-341-3212 is not classified as a special type of cargo when transported by water. 3120-01-341-3212 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 3120-01-341-3212
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Plated/Coated Item
- 2lb or less, one dimension 2" or less, other dimensions less than 24"
- Above 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- No Requirement
- No Requirement
- Not Applicable
- MIL-DTL-117, Type II, Class C, Style 1, Heavy Duty, Waterproof, Greaseproof, Opaque Bag
- No special marking
- No Requirement
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
Procurement History 3120-01-341-3212 1 Records
Contracting Technical Data File (CTDF) 3120-01-341-3212 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- K
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Y
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: